Abstract:The radio frequency quadrupole (RFQ) accelerator is a common linear accelerator placed directly after the ion source for low energy ion acceleration. In 1994 and 1999, the RFQ research group of Peking University, led by Academician Chen Jiaer, first proposed and developed the heavy ion integral split ring (ISR) 300 keV N+ and 1 MeV O+ RFQ accelerators. Because of the simultaneous transverse focusing and longitudinal bunching in a cavity, an RFQ accelerator is considered to be the most suitable linear accelerator for the acceleration of low energy and high current beams. However, a long RFQ cavity will decrease the efficiency of RF power. To improve the acceleration efficiency of ions, separated-function radio frequency quadrupole (SFRFQ) was proposed for the first time, and the prototype of the structure was developed and the beam experiments were completed. A new idea of accelerating positive and negative ions simultaneously using RFQ accelerators was proposed for the first time. The process of beam bunching and acceleration of positive and negative ions was simulated and the microscopic beam waveforms of positive and negative oxygen ions were observed successfully with a coaxial fast Faraday cup. Beam experiments were completed on two existing RFQ accelerators. The equipartitioned design scheme of RFQ is developed, and the first neutron imaging facility based on RFQ (Peking University Neutron Imaging Facility, PKUNIFTY) is developed in China. The four-rod D+ RFQ accelerator is the one with the highest frequency in the world so far. In cooperation with the Institute of High Energy Physics of the Chinese Academy of Sciences and the China Institute of Atomic Energy, the 352 MHz proton RFQ model cavity was developed, which effectively boosted the development of China's first proton ADS RFQ accelerator, and won the Beijing Science and Technology Achievement Award in 2008. Peking University and Institute of Modern Physics of the Chinese Academy of Sciences have designed and built a high charge state heavy ion U-238(34+) CW RFQ accelerator, which has successfully accelerated many kinds of heavy ion beams and has been in stable operation for 8 years. In cooperation with Institute of Modern Physics of the Chinese Academy of Sciences, the world's first 162.5 MHz window-type RFQ accelerator was developed, and the CW H-2(+) current intensity was successfully accelerated to 1.95 mA, and the transmission efficiency was 90%. In cooperation with Southwestern Institute of Physics, a 162.5 MHz D+ four-vane RFQ accelerator was designed and tested, beam experiments on the RFQ accelerator indicated that the maximum accelerated beam current could reach 10 mA with a duty factor of 1%. The development direction of RFQ accelerators in the future is the high power accelerators with high current intensity and high duty factor. The above work lays a good foundation for the development of high power RFQ accelerators. High current continuous wave radio quadrupole accelerator (CW RFQ) is widely used as an injector in many big science projects, such as accelerator driven sub-critical clean nuclear energy system (ADS), isotope separation online analysis, International Fusion Materials Irradiation Facility (IFMIF). The most common component of accelerating the low energy segment is also widely used as an independent accelerator application device, it has a very broad application prospect in neutron imaging, boron neutron capture for cancer treatment (BNCT) and other fields.

A cold-cathode PIG ion source for the production of intense O− ion beam

INVESTIGATION OF ION SOURCES AND INJECTOR USED IN RFQ ACCELERATOR

Simulation of Electron Behavior in PIG Ion Source for 9MeV Cyclotron

A Broad Beam Cold Cathode Penning Ionization Gauge Ion Source For Ion-Beam-Assisted Deposition

CW/Pulsed H− Ion Beam Generation with PKU Cs-free 2.45 GHz Microwave Driven Ion Source

Intense Beams from Gases Generated by A Permanent Magnet Ecr Ion Source at Pku

Experimental Studies on the Acceleration of Positive & Negative Ions with a Heavy Ion ISR RFQ

Design of a Compact, Permanent Magnet Electron Cyclotron Resonance Ion Source for Proton and H2+ Beam Production

Penning source for ion implantation

Minipermanent Magnet High-Current Microwave Ion Source

Design and Testing of an Internal Hot-Cathode-type PIG Ion Source for Superconducting Cyclotron

Possibility of Generating H+, or H2+, or H3+ Dominated Ion Beams with a 2.45 GHz Permanent Magnet ECR Ion Source

High current H2(+) and H3(+) beam generation by pulsed 2.45 GHz electron cyclotron resonance ion source.

Investigation of High Duty Factor Isr Rfq-1000

Improvement of Miniaturized 2.45 GHz ECR Plasma Flood Gun at PKU

Upgrading Of A Heavy Ion 1mev Isr Rfq Accelerator

A Miniatured Built-in Surface Ionization Oven for the Compact Microwave Ion Source

RFQ Accelerator Research and Innovation Practice at Peking University

New Progress of a 2.45 GHz ECR Ion Source for Carbon Positive Ion Mass Spectrometry

Progress and future developments of high current ion source for neutral beam injector in the ASIPP

Beam optimization of RFQ and SFRFQ combined accelerator at Peking University