Abstract:AbstractToday, the use of sheet hydroforming methods in the conventional deep drawing process has significantly improved the formability of the sheet. However, due to the limitations of the sheet hydroforming process, new methods can be used in combination with it, such as ultrasonic vibration–assisted forming. Many of the mechanical effects of ultrasonic vibration in the metal forming process are due to the metallurgical and structural impacts of the material. Hence, to find the cause of the observed cases, one must look at the microstructural interactions of materials. Therefore, the process of St14 sheet hydroforming with the assistance of ultrasonic vibration is investigated microstructurally in this paper. For this purpose, during the hydroforming drawing process, ultrasonic vibration was radially applied to the punch in a hydro-mechanical deep drawing die. Then, the process parameters, including thickness, equivalent strain, grain size, and rotation at a selected point of the cross-section of the sample parts, are compared in four modes of conventional deep drawing (CDD), hydroforming deep drawing (HDD), deep drawing assisted by ultrasonic vibration (UDD), and hydroforming deep drawing assisted by ultrasonic vibration (UHDD). Results showed that the application of ultrasonic vibrations in the sheet hydroforming process led to a significant reduction in thickness strain (as well as equivalent strain) in the wall of the cup, increased grain length, and reduced rotation. This implies that the positive impact of ultrasonic vibrations in the flow of materials is due to the reduction of friction and facilitates the movement of dislocations.

Status and Development of Hydro-forming Deep Drawing of Cylinder Cups

Design and Analysis of the Hydraulic Cylinder of a Centering Device for Ship Pipeline Welding

The Study on Forming Principle in the Process of Hydro-Mechanical Reverse Deep Drawing with Axial Pushing Force for Cylindrical Cups

Deep Drawing Using a Novel Hydromechanical Tooling

Development of forming process for deep drawing of square cup with optimized blank holder pressure

Developments in Researches and Applications of Tube Hydroforming

Micro Deep Drawing of Micro Cups by Using Dlc Film Coated Blank Holders and Dies

Experiments for Novel Hydro-Mechanical Deep Drawing Die

Hydroforming Processes and Equipments of Hollow Structures with Various Sections

Improvement of Hydro-Mechanical Drawing Die and Process

Research on 5A06 Aluminium Alloy Thin-wall Semisphere Hydromechanical Deep Drawing Process

Research on compound forming process of cup-shaped part with inner gear

Microstructural analysis of sheet hydroforming process assisted by radial ultrasonic punch vibration in a hydro-mechanical deep drawing die

The technique and applications of the sheet hydroforming

Development of a Kind of Ultrahigh Pressure Integration Device for Hydro-bulging in the Common Press

New Developments in Theory and Processes of Internal High Pressure Forming

Hydroforming of Typical Hollow Components

Process window calculation and pressure locus optimization in hydroforming of conical box with double concave cavities

Deformation Patterns in Hydroforming of Thin-Walled Y-Shaped Tube

Deformation Optimization for Inconel718 Superalloy Sheet Hydroforming Numerically and Experimentally

Study on formability and microstructure evolution of hot deep drawing manufactured 7005 aluminum alloy sheet metal