Abstract:The stress-based criteria have long been adopted as the major guideline in the design of line pipes, but for those under the displacement control, such as pipelines in seismic regions, landslide areas and subsea environment, the stress-based criteria tend to be relatively conservative, instead the strain-based criteria will be more economic and reasonable to use in the pipe design. Hence, the strain-based design methods in different international standards were summarized and compared, as well as their applicable conditions. In view of the different formulas of the ultimate compressive strain of local buckling in the standards of Norway, Canada, etc., calculations of the ultimate compressive strain were conducted under different radius-thickness ratios and design pressures. It is revealed that the Canadian standard expression and Japanese SUZUKI formula are more conservative. To meet the demand of real engineering application, it was suggested that 0.3 t/D (t refers to the pipe wall thickness; D refers to the external diameter of pipes) be adopted as a conservative estimation of the ultimate compressive strain in the absence of design pressure, and that the Canada standard expression be employed while the design pressure can not be ignored. Because the strain-based design process has not been proposed in the Chinese pipeline codes, the work of this paper can serve as a reference for the research in the relevant areas in present China.

Analysis on Relative Stiffness of Pipeline Soil for Buried Pipelines

Calculation on Mechanical Behaviors of Buried Pipelines Adjacent to Deep Excavation

Analytical Elastic Solution of Earth Pressure in Deep-Buried Pipe

Test Study on Distribution of Base Pressure of Rigid Pipe on Flat Soil Foundation

Analysis on the Key Problem of the Pipeline-soil Coupling Model under Traffic Loads

Numerical Analysis of Buried Pipe Characteristics

Tunnelling-induced Nonlinear Responses of Continuous Pipelines Resting on Tensionless Winkler Foundation

A Simplified Analytical Solution of Pipeline Response under Normal Faulting

Assessment Model of Pipe–soil Interaction During Large-Amplitude Lateral Displacements for Deep-Water Pipelines

Modelling lateral pipe-soil interaction on soft clay using large displacement sequential limit analysis

Numerical Studies on Filter of Piping in Broadly Graded Cohesionless Soils

A study of the ultimate compressive strain of local buckling in strain-based design of pipelines

Elastoplastic Pipe-Soil Interaction Analyses of Partially-Supported Jointed Water Mains

Prediction for Response of Adjacent Pipelines Induced by Pipe Jacking Construction

Numerical Simulation of the Buried Pipelines Protection Adjacent to Dee P Excavation

Pipeline Lateral Buckling Triggered by the Residual Curvature with Tri-Linear Axial Pipe-Soil Interaction

Analytical Solution for Upheaval Buckling of Shallow Buried Pipelines in Inclined Cohesionless Soil

Analytical Analysis of Pipeline–soil Interaction During J-lay on a Plastic Seabed with Bearing Resistance Proportional to Depth

Research on upper pipeline-soil interaction induced by shield tunnelling

ANALYSIS OF STABILITY FAILURE FOR PIPELINE DURING LONG DISTANCE PIPE JACKING

3D FEM ANALYSIS ON DEFORMATION OF PERPENDICULARLY CROSSING BURIED PIPELINE IN PIPE JACKING