Abstract:Chlorine dioxide is widely used for pulp bleaching because of its high delignification selectivity. However, efficient and clean chlorine dioxide bleaching is limited by the complexity of the lignin structure. Herein, the oxidation reactions of phenolic (vanillyl alcohol) and non-phenolic (veratryl alcohol) lignin model species were modulated using chlorine dioxide. The effects of chlorine dioxide concentration, reaction temperature, and reaction time on the consumption rate of the model species were also investigated. The optimal consumption rate for the phenolic species was obtained at a chlorine dioxide concentration of 30 mmol·L−1, a reaction temperature of 40 °C, and a reaction time of 10 min, resulting in the consumption of 96.3% of vanillyl alcohol. Its consumption remained essentially unchanged compared with that of traditional chlorine dioxide oxidation. However, the consumption rate of veratryl alcohol was significantly reduced from 78.0% to 17.3%. Additionally, the production of chlorobenzene via the chlorine dioxide oxidation of veratryl alcohol was inhibited. The structural changes in lignin before and after different treatments were analyzed. The overall structure of lignin remained stable during the optimization of the chlorine dioxide oxidation treatment. The signal intensities of several phenolic units were reduced. The effects of the selective oxidation of lignin by chlorine dioxide on the pulp properties were analyzed. Pulp viscosity significantly increased owing to the preferential oxidation of phenolic lignin by chlorine dioxide. The pollution load of bleached effluent was considerably reduced at similar pulp brightness levels. This study provides a new approach to chlorine dioxide bleaching. An efficient and clean bleaching process of the pulp was developed.

The Release of DCS and its Laccase Treatment during Bleaching Process of ONP Deinked Pulp

Effect of Fixing Agent Dosage on the Mechanism of Colloidal Substances Retention Onto Pulp

The Effects of NaOH-Urea Aqueous Solution on the Strength and Softness Properties of Bamboo Ligno-cellulosic Fibers

Electrochemical Oxidation of Chemi-Thermo-mechanical Pulping Wastewater

Effect of Different Chemical Treatments on the Dispersion Properties of Carbon Fiber and Paper Properties

Oxygen Delignification of Kraft Pulp of Whole Stalk Kenaf

Effect of DCS in Recycled White Water on Deinking and Bleaching of Old Newspaper

Effects of Deinking Mode on Pore Structure and Crystallization Property of Recycled Fiber

Enzymatic Deinking of Old Newspaper

Industrial trial results on enzymatic deinking and fiber modification of old newsprint with cellulase from aspergillus L22

Analysis Of Electrochemical Character Affecting Deinking Efficiency Of Onp

Effect of enzyme lignin oxidation by laccase on the enzymatic-mechanical production process of lignocellulose nanofibrils from mechanical pulp

The Dual Effect of Ionic Liquid Pretreatment on the Eucalyptus Kraft Pulp during Oxygen Delignification Process

Effects of the Preferential Oxidation of Phenolic Lignin Using Chlorine Dioxide on Pulp Bleaching Efficiency

High lignin-containing nanocelluloses prepared via TEMPO-mediated oxidation and polyethylenimine functionalization for antioxidant and antibacterial applications

Effect of Pretreatments on the Enzymatic Hydrolysis of High-Yield Bamboo Chemo-Mechanical Pulp by Changing the Surface Lignin Content

Coagulation and ozonation treatment of biologically treated wastewater from recycled paper pulping industry: effect on the change of organic compounds

Integrated Process Combined with Fenton Reaction for the Treatment of Papermaking Deinking Wastewater

Efficient degradation of lignin by chlorine dioxide and preparation of high purity pulp fiber

Periodate-chlorite oxidation for dicarboxylcellulose (DCC) production: activation strategies for the dissolution and visualization of oxidized groups distribution

Pretreatment to Improve Adsorption and Effectiveness of Wet End Chemicals for A Bleached Chemithermomechanical Pulp