Abstract:For high-speed traveling-wave modulator, impedance match, velocity match and low microwave attenuation are important. But they have different effects on bandwidth for different structure and scheme for quantum well electroabsorption modulator and bulk Mach-Zehnder electrooptic modulator. For bulk Mach-Zehnder electrooptic modulator, the longer active waveguide is needed, and at such situation, according to the normalized gain (or modulation reduction factor) the velocity match and impedance match and low microwave attenuation should be well satisfied to achieve good performance. While for the quantum well electroabsorption modulator, limited by the optical loss, short active waveguide must be used. When the device length is largely reduced match requirement is not so strict and it is also difficult to achieve good match. Low terminator electroabsorption modulator is reported recently. Its concept could be inferred from the normalized gain formula. And some technology tendency in traveling-wave electroabsorption and Mach-Zehnder modulator could be also obtained and could explain series of experiment. From calculation and experiment the low impedance and low terminator could expand the bandwidth by slight mismatch. The relation of modulator characteristic impedance, microwave phase velocity and microwave attenuation is not much considered for simplification. The results are useful to design and optimize modulator.

Experimental study of NRZ format wavelength conversion using electroabsorption modulator

Photonic Generation of Ultrawideband Monocycle and Doublet Pulses by Using a Semiconductor-Optical-amplifier-based Wavelength Converter.

Different Effects on Bandwidth for Traveling-Wave Quantum Well Electro-Absorption Modulator and Bulk Mach-Zehnder Electric-Opto Modulator

80Gb/s NRZ Ge Waveguide Electro-Absorption Modulator.

Experimental Characterisation of Wavelength Conversion at 40gb/s Based on Electroabsorption Modulators

A Study on the Wavelength Conversion and All-Optical 3R Regeneration Using Cross-Absorption Modulation in a Bulk Electroabsorption Modulator

An 80Gb/s Ge Waveguide Electro-Absorption Modulator

Electro-absorption Modulated 53 Gbps Widely Tunable Laser Based on Half-Wave V-coupled Cavities

InGaAsP Multiple-Quantum-Well Electroabsorption Modulator Integrated With V-Cavity Laser

Experimental Analysis of All Optical Wavelength Conversion Based on 2.5gbit/s NRZ Data Using XGM in SOA

InGaAs/InGaAsP Diffused Quantum Wells Optical Amplifiers and Modulators

Monolithically Integrated Channel-selectable Wavelength Converter Based on XAM and Q-modulation Principle

The Optical Waveguide Design Of Quantum Well Electroabsorption Optical Modulator

Widely Tunable Electro-Absorption Modulated V-Cavity Laser

Monolayer WS2 based electro-absorption modulator

Modeling of Ultrafast Waveguided Electro-Absorption Modulator at Telecommunication Wavelength (λ = 1.55 Μm) Based on Intersubband Transition in an InGaAs/AlAs/AlAsSb Asymmetric Coupled Double Quantum Well Lattice-Matched to InP

Optimization of Multiple Quantum Well Electroabsorption Modulators Based on Transmission Performance Simulation

42.8 Gbit/s Electro-Absorption Modulated NRZ Transmission over 1200km Standard Singlemode Fibre

Theoretical Study on Wavelength Conversion Based on Cross Phase Modulation Using Semiconductor Optical Amplifiers

NOISE CHARACTERISTICS AND PERFORMANCE ANALYSIS OF WAVELENGTH CONVERTERS BASED ON CROSS-GAIN MODULATION IN SEMICONDUCTOR OPTICAL AMPLIFIERS

Optimization Of Wavelength Detuning Of High Speed Electroabsorption Modulators For Better Transmission Capability