Abstract:Using the current coal-fired power plant to treat sludge with large annual production is an efficient sludge treatment method. Nevertheless, the majority of the previous studies concentrated on sludge co-firing with low blending ratio and moisture content in utility boiler. Further analysis and discussion are necessary regarding the impact of sludge with high blending ratio and high moisture content on co-firing performance as well as the potential interactions between high moisture content sludge and coal during the co-firing process. The simulation results of the verified computational fluid dynamic (CFD) model can be regarded as numerical experiments. In the present research, CFD was used to analyze the co-firing characteristics of municipal sludge and coal in a 600 MW tangentially fired utility boiler. The impacts of sludge moisture content, blending ratio, blending strategy, and secondary air (SA) distribution on co-combustion characteristics and NOX emissions were investigated, and their potential synergistic effects were assessed. The co-firing of coal and sludge has little impact on the furnace outlet temperature while potentially lowering NOX emissions, provided that the net calorific value of the feeding of the mixture of sludge and coal is kept constant. The reduction of sludge moisture content can significantly improve co-combustion performance, but it also facilitates NOX production. Blending sludge from the position of the medium-upper burners can reduce the number of layers needed to burn the sludge in practical coal-fired boiler. Furthermore, the SA distribution has a major impact on the furnace outlet flue gas temperature and NOX content. The shrunk-middle type is the optimum scheme for SA distribution. This study contributes to a deeper knowledge of the actual co-firing of sludge and coal in the utility boiler and provides a possible theoretical foundation for the widespread, clean, and effective use of sludge.

CFD Modelling Applied to the Co-Combustion of Paper Sludge and Coal in a 130 t/h CFB Boiler

Three-dimensional Numerical Simulation of Coal and Papermaking Trash Co-Combustion in a Circulating Fluidized Bed

99/00595 Experimental study and design considerations for co-firing paper mill sludge in CFB boiler

Simulation of Combustion of Municipal Solid Waste and Coal in an Industrial-Scale Circulating Fluidized Bed Boiler

Application of Different Combustion Models for Simulating the Co-combustion of Sludge with Coal in a 100 MW Tangentially Coal-Fired Utility Boiler

Combustion Modeling Of Cfb Boiler Furnace Based On An Euler-Euler Approach

Dynamic Modeling and Simulation of CFB Boiler

Computational Particle Fluid Dynamics Simulation on Combustion Characteristics of Blended Fuels of Coal, Biomass, and Oil Sludge in a 130 T H−1 Circulating Fluidized Bed Boiler

Operational Characteristic Analysis on CFB Coal-fired Boiler with Co-combustion of Paper Sludge

Experimental Research for the Co-combustion Characteristics of Sewage Sludge and Coal in CFB

Co-combustion of Paper Sludge in a 750 T/d Waste Incinerator and Effect of Sludge Moisture Content: A Simulation Study

Field Test and Numerical Simulation for Co-combustion of Sludge in a 100,MW Coal Fired Boiler

A mathematical model for a circulating fluidized bed (CFB) boiler

Three-dimensional Full-Loop Numerical Simulation of Coal and Sludge Co-Combustion in a Circulating Fluidized Bed

A Comprehensive CFD Combustion Model for Supercritical CFB Boilers

Two-Dimensional Computational Fluid Dynamics Simulation of Coal Combustion in A Circulating Fluidized Bed Combustor

Modeling on the Combustion System of 150 T/h Circulating Fluidized Bed Boiler

Investigation on Co-combustion Characteristics and NO Emissions of Coal and Municipal Sludge in a Tangentially Fired Boiler

Experimental Research on Co-combustion of Paper Mill Sludge and Coal in Circulating Fluidized Bed

Co-combustion of sludge in a 100 MW unit coal-fired boiler:numerical simulation