Abstract:This work highlights the relationship between the preparation, crystallization behavior, microstructures, and mechanical properties of Cu-based bulk metallic glasses (BMGs) and their composites (BMGCs). (Cu47Zr45Al8)97.5Y1.5Nb in-situ BMGCs were prepared using isothermal annealing, and the experimental results indicate tunable mechanical properties of the alloys by processing parameter manipulation. The crystallinity of (Cu47Zr45Al8)97.5Y1.5Nb BMGCs increases with extended annealing temperature and time, while their phase transition with rising temperature follows Am (amorphous state) → Am + Cu10Zr7 →Am + Cu10Zr7 + AlCu2Zr + Al2Zr. Precipitation strengthening during annealing above 720 K (447 ºC) can enhance the alloy microhardness remarkably and achieve an optimum of 712 HV by annealing at 800 K (527 ºC) for 60 min. TEM results show that Cu10Zr7 with sizes of 12~15 nm precipitates out upon crystallization and thereby accounts for the superior compressive property. The alloy exhibits a fracture strength up to 2080 MPa after annealing at 680 K (407 ºC) for 30 min. Morphological observation of the fracture surface reveals a transition of fracture characteristics from the typical amorphous ductile manner to a brittle manner with further annealing. The investigation provides novel thoughts of BMGs processing for further performance improvement.

Formation of Mg–Cu–Zn–Y Bulk Metallic Glasses with Compressive Strength over Gigapascal

Mg-based Bulk Metallic Glass Composites with Plasticity and Gigapascal Strength

Thermophysical and Mechanical Properties of Multicomponent Zr37Hf16Ni12.5Cu12.5Al11Co6Nb5 Bulk Glass-Forming Alloy

Mg-Cu-Zn-Y-Zr Bulk Metallic Glassy Composite with High Strength and Plasticity

Thermophysical and Mechanical Properties of Multicomponent Zr37Hf16Ni12.5Cu12.5Al1 1co6nb5 Bulk Glass-Forming Alloy

Glass-forming Ability, Thermal Stability of B2 CuZr Phase, and Crystallization Kinetics for Rapidly Solidified Cu–Zr–Zn Alloys

Formation of Bulk Metallic Glasses from Cu-Zr Based Alloys with Yttrium Addition

Microstructure and mechanical properties of Mg-Cu-Y-Zn bulk metallic glass matrix composites prepared in low vacuum

Zr–(Cu,Ag)–Al Bulk Metallic Glasses

High-zirconium Bulk Metallic Glasses with High Strength and Large Ductility

Mg-based Bulk Metallic Glass Composites with Plasticity and High Strength

Thermal Stability, Glass-Forming Ability and Mechanical Properties of Mg-Y-Zn-Cu Glassy Alloys

Bulk Metallic Glasses with Large Plasticity: Composition Design from the Structural Perspective

Formation of high strength Mg–Cu–Zn–Y alloys

Formation and Mechanical Properties of Mg-Cu-Al-Gd Bulk Metallic Glass Composites

Formation of Zr–Co–Al bulk metallic glasses with high strength and large plasticity

Synthesis and characterization of Mg-based bulk metallic glass

Effect of Yttrium Content on the Glass -forming Ability and Mechanical Properties of Zr47-xCu46Al7Yx Bulk Metallic Glasses

Crystallization Behavior and Mechanical Properties of Cu-based Bulk Metallic Glass Composites

Formation of Cu–Zr–Al Bulk Metallic Glass Composites with Improved Tensile Properties

Mechanical Behavior of Zr65Al10Ni10Cu15 and Zr52.5Al10Ni10Cu15Be12.5 Bulk Metallic Glasses