Abstract:The maximum sensitivity function as the conventional robustness index is often used to test the robustness and cannot be used to tune the controller parameters directly. To reduce analytical difficulties in dealing with the maximum sensitivity function and improve the control performance of the proportional-integral-derivative controller, the relative delay margin as a good alternative is proposed to offer a simple robust analysis for the proportional-integral-derivative controller and the first-order plus dead-time systems. The relationship between the parameters of the proportional-integral-derivative controller and the new pair, e.g., the phase margin and the corresponding gain crossover frequency, is derived. Based on this work, the stability regions of the proportional-integral-derivative controller parameters, the proportional gain and the integral gain with a given derivative gain, are obtained in a simple way. The tuning of the proportional-integral-derivative controller with constraints on the relative delay margin is simplified into an optimal disturbance rejection problem and the tuning procedure is summarized. For convenience, the recommended parameters are also offered. Simulation results demonstrate that the proposed methodology has better tracking and disturbance rejection performance than other comparative design methodologies of the proportional-integral/proportional-integral-derivative controller. For example, the integrated absolute errors of the proposed proportional-integral-derivative controller for the tracking performance and disturbance rejection performance are less than 91.3% and 91.7% of the integrated absolute errors of other comparative controllers in Example 3, respectively. The proposed methodology shows great potential in industrial applications. Besides, the proposed method can be applied to the design of the proportional-integral-derivative controller with filtered derivative which is recommended for practical applications to weaken the adverse influence of the high-frequency measurement noise.

Robust IMC-PID Controller Design for an Opto-electronic Tracking System with Time-delay

IMC-PID Tuning Method Based on Sensitivity Specification for Process with Time-Delay

A Robust Tuning Method of Internal Model PID Controller for Process with Time-delay

Robust Pid Controller Design Using Particle Swarm Optimizer

Pid Controller Design Based on the Time Domain Information of Robust Imc Controller Using Maximum Sensitivity

Intelligent Optimization Design of PID Controller for Integrating Processes

IMC–PID Design: Analytical Optimization for Performance/Robustness Tradeoff Tuning for Servo/Regulation Mode

IMC_PID Design of Missile Servo System Based on Tuning Gain and Phase Margin

Robust digital double PI control for a general process with time-varying time delay

Low‐gain Internal Model Control PID Controller Design Based on Second‐order Filter

Two-degree-of-freedom IMC-PID design of missile servo system based on tuning gain and phase margin

PID CONTROL FOR INTEGRATOR AND DEAD TIME PROCESS

A Multivariable IMC-PID Method for Non-Square Large Time Delay Systems Using NPSO Algorithm

IMC-PID design based on model matching approach and closed-loop shaping

Research on PID Tuning Method of Magnetically Suspended Rotor System Based on IMC

Satisfactory PID Decoupling Control for Electro-optical Tracking Devices on Moving Base

The IMC-PID controller design for TITO process using closed-loop identification method

A new PID controller design with constraints on relative delay margin for first-order plus dead- time systems

IMC-PI control method of two-input two-output time-delay process

ENHANCED IMC-PID CONTROLLER DESIGN WITH LEAD-LAG FILTER FOR UNSTABLE AND INTEGRATING PROCESSES WITH TIME DELAY

Design of Missile Servo System Based On Internal Model PID Robust Control