Abstract:The maximum sensitivity function as the conventional robustness index is often used to test the robustness and cannot be used to tune the controller parameters directly. To reduce analytical difficulties in dealing with the maximum sensitivity function and improve the control performance of the proportional-integral-derivative controller, the relative delay margin as a good alternative is proposed to offer a simple robust analysis for the proportional-integral-derivative controller and the first-order plus dead-time systems. The relationship between the parameters of the proportional-integral-derivative controller and the new pair, e.g., the phase margin and the corresponding gain crossover frequency, is derived. Based on this work, the stability regions of the proportional-integral-derivative controller parameters, the proportional gain and the integral gain with a given derivative gain, are obtained in a simple way. The tuning of the proportional-integral-derivative controller with constraints on the relative delay margin is simplified into an optimal disturbance rejection problem and the tuning procedure is summarized. For convenience, the recommended parameters are also offered. Simulation results demonstrate that the proposed methodology has better tracking and disturbance rejection performance than other comparative design methodologies of the proportional-integral/proportional-integral-derivative controller. For example, the integrated absolute errors of the proposed proportional-integral-derivative controller for the tracking performance and disturbance rejection performance are less than 91.3% and 91.7% of the integrated absolute errors of other comparative controllers in Example 3, respectively. The proposed methodology shows great potential in industrial applications. Besides, the proposed method can be applied to the design of the proportional-integral-derivative controller with filtered derivative which is recommended for practical applications to weaken the adverse influence of the high-frequency measurement noise.

A Robust Tuning Method of Internal Model PID Controller for Process with Time-delay

IMC-PID Tuning Method Based on Sensitivity Specification for Process with Time-Delay

Intelligent Optimization Design of PID Controller for Integrating Processes

A Developed Method of Tuning PID Controllers with Fuzzy Rules for Integrating Processes.

Robust IMC-PID Controller Design for an Opto-electronic Tracking System with Time-delay

Performance assessment of PID controller with time-variant disturbance dynamics

Low‐gain Internal Model Control PID Controller Design Based on Second‐order Filter

Robust PID Tuning Using Closed-Loop Identification

PID CONTROL FOR INTEGRATOR AND DEAD TIME PROCESS

A PID Tuning Method for Integrating Processes

Pid Controller Design Based on the Time Domain Information of Robust Imc Controller Using Maximum Sensitivity

Effective Tuning Method for Fuzzy PID with Internal Model Control

New Design Method of PID Controller for Inverse Response Processes with Time Delay

Robust digital double PI control for a general process with time-varying time delay

A new PID controller design with constraints on relative delay margin for first-order plus dead- time systems

Research on PID Tuning Method of Magnetically Suspended Rotor System Based on IMC

Tuning Of The Pid Controller Based On Model Predictive Control

IMC–PID Design: Analytical Optimization for Performance/Robustness Tradeoff Tuning for Servo/Regulation Mode

Simulation of Fuzzy PID Internal Model Control for Time Delay System

Internal Model Control-Based PID in the Application of a Large Time Delay System

The Simulation and Experiment on the Parameter-Tuning Methods of PID Controllers