Abstract:For the research on real-time accurate testing technology for the explosion point spatial coordinate of munitions, its currently commonly used methods such as acoustic–electric detection or high-speed imaging are limited by the field conditions, response rate, cost, and other factors. In this paper, a method of spatial coordinate testing for the explosion point based on a 2D PSD (position-sensitive detector) intersection is proposed, which has the advantages of a faster response, better real-time performance, and a lower cost. Firstly, a mathematical model of the spatial coordinate testing system was constructed, and an error propagation model for structural parameters was developed. The influence of the position of the optical axes' intersection as well as the azimuth angle and pitch angle on the test accuracy of the system was simulated and analyzed, thus obtaining the distribution and variation trend of the overall error propagation coefficient of the system. Finally, experiments were designed to obtain the test error of the system for validation. The results show that the system test accuracy is high when the azimuth angle is 20°–50°, the overall error propagation coefficient does not exceed 48.80, and the average test error is 56.17 mm. When the pitch angle is −2.5°–2.5°, the system has a higher test accuracy, with the overall error propagation coefficient not exceeding 44.82, and the average test error is 41.87 mm. The test accuracy of the system is higher when the position of the optical axes' intersection is chosen to make sure that explosion points fall in the region of the negative half-axis of the Zw-axis of the world coordinate system, with an overall error propagation coefficient of less than 44.78 and an average test error of 73.38 mm. It is shown that a reasonable selection of system structure parameters can significantly improve the system test accuracy and optimize the system deployment mode under the long-distance field conditions so as to improve the deployment efficiency.

Research on Measurement System of In-Bore Projectile Motion Posture Based on PSD

Accuracy Analysis for Digital Boresighting of Aircraft Gun

A New Boresighting Method of the Aircraft Gun Using a Laser Tracker

Study Of The Bullet Position Measuring Model With Six Light Screens

Research of the Testing System of Characteristics of Electrical Vibration Table Based on PSD

Study of Rotation Axis Measurement System Based on PSD

Research on Real-time Measuring System about Position Posture of Motional Object with Four Beams of Laser and Position Sensitive Detector

Double Position Sensitive Detectors (psds) Based Measurement System of Trajectory Tracking of a Moving Target

Research on Motion Stability Measurement of Guide Rails Based on Position Sensitive Detector

Application of a High Speed Streak Synchronized Camera System with Laser Illumination

Research on Stabilization Precision Test System of Fire Control System

Error Analysis and Optimization of Structural Parameters of Spatial Coordinate Testing System Based on Position-Sensitive Detector

High-precision velocity measuring system for projectiles based on retroreflective laser screen

Research on Projectile Breech Pressure Measuring Method Based on Storage Measurement Technique

Measure Passive Incident Laser Beam'S Space Direction by Use of the Psd

A High Precision Infrared Light-spot Motion Analysis and Measurement System

A Measurement Method of Muzzle Disturbance Based on PSD

Study on Projectile Dynamic Parameters Measurement

Design of an optic-electric system for measuring shot motion parameters

Real-time measurement system for motion parameters of aerial target

Study on Position Detection Method of Multi-Stage Coilgun Projectile