New anthracene-tetrathiafulvalene derivative-encapsulated SWNT nanocomposite and its application for biosensing.

Min Song,Xuemei Wang,Wei Liu,Jinglin Zuo

DOI: https://doi.org/10.1016/j.jcis.2009.10.084

IF: 9.9

2010-01-01

Journal of Colloid and Interface Science

Abstract:A novel anthracene–tetrathiafulvalene derivative has been synthesized and immobilized on single-walled carbon nanotubes through non-covalent sidewall functionalization.

What problem does this paper attempt to address?

Carbon Nanotube DNA Sensor and Sensing Mechanism.

Xiaowu Tang,Sarunya Bansaruntip,Nozomi Nakayama,Erhan Yenilmez,Ying-Lan Chang,Qian Wang

DOI: https://doi.org/10.1021/nl060613v

IF: 10.8

2006-01-01

Nano Letters

Abstract:We report the fabrication of single-walled carbon nanotube (SWNT) DNA sensors and the sensing mechanism. The simple and generic protocol for label-free detection of DNA hybridization is demonstrated with random sequence 15mer and 30mer oligonucleotides. DNA hybridization on gold electrodes, instead of on SWNT sidewalls, is mainly responsible for the acute electrical conductance change due to the modulation of energy level alignment between SWNT and gold contact. This work provides concrete experimental evidence on the effect of SWNT-DNA binding on DNA functionality, which will help to pave the way for future designing of SWNT biocomplexes for applications in biotechnology in general and also DNA-assisted nanotube manipulation techniques.
Preparation of CNTs/PANi core/shell-structured nanowires and improvement of sensitivity of chemical sensors

Xingfa Ma,Shujuan Niu,Mingjun Gao,Xiaochun He,Guang Li

DOI: https://doi.org/10.4028/www.scientific.net/MSF.686.438

2011-01-01

Abstract:In order to improve the sensing-properties of carbon nanotube based composite for potential applications in chemical sensors, CNTs/PANi core/shell-structured nanowires were prepared with in-situ polymerization approach. A series of characterizations was carried out by TEM (transmission electron microscopy), the Fourier-Transform Infrared (FTIR) spectra, and so on. A chemical prototype sensor was constructed based on CNTs/PANi core/shell-structured nanowires and interdigital-structured electrodes on flexible polymer substrate. The gas-sensing behaviors of the sensor to some gases operating at room temperature were examined. Results showed that the sensitivity of CNTs/PANi core/shell-structured nanowires was increased dramaticly compared with pure carbon nanotube materials. This provides a carbon nanotube based composite materials with enhanced gas-sensitivity, which would have potential applications in some chemical sensors.
Synthesis of water-soluble phosphonate functionalized single-walled carbon nanotubes and their applications in biosensing

Pan Li,Hailing Liu,Yu Ding,Yì Wáng,Yu Chen,Yiming Zhou,Yawen Tang,Haiyan Wei,Chenxin Cai,Tianhong Lü

DOI: https://doi.org/10.1039/c2jm31350b

2012-01-01

Journal of Materials Chemistry

Abstract:A facile noncovalent approach is proposed to graft phosphonate groups onto the surface of single-walled carbon nanotubes (SWNTs) by pi-pi stacking interactions between naphthalen-1-ylmethylphosphonic acid (NYPA) and SWNTs. Ultraviolet-visible (UV-vis) spectroscopy, fluorescence spectroscopy, X-ray photoelectron spectroscopy (XPS), fourier transform infrared (FT-IR) spectroscopy and zeta potential analysis confirm the phosphonate groups noncovalently attach on the SWNTs surface, in accordance with the prediction of molecular dynamics (MD) simulations. The phosphonate functionalized SWNTs have good solubility in polar solvent due to the big electrostatic repulsion between phosphonate groups, the strong hydration force of phosphonate groups and the partial debundling of SWNTs. X-ray diffraction (XRD) and Raman spectroscopy measurements demonstrate the water-soluble phosphonate functionalized SWNTs almost completely preserve the electronic and structural integrity of the pristine SWNTs. Meanwhile, the as-prepared phosphonate functionalized SWNTs show good biocompatibility for protein immobilization. Consequently, myoglobin (Mb) proteins immobilized on the phosphonate functionalized SWNTs show excellent bioelectrocatalytic activity towards the reduction of hydrogen peroxide due to the exciting electronic properties of the phosphonate functionalized SWNTs and the fast electron transfer rate of Mb.
A New Application of Carbon Nanotubes Constructing Biosensor

HG Xue,WL Sun,BJ He,ZQ Shen

2002-01-01

Abstract:Carbon nanotubes used for constructing biosensor was described for the first time. Single-wall carbon nanotubes (SWNTs) functionalized with carboxylic acid groups were used to immobilize glucose oxidase forming a glucose biosensor. The biosensor response can be determined by amperometric method at a low applied potential (0.40 V).
Chemical Sensing with Polyaniline Coated Single‐Walled Carbon Nanotubes

Mengning Ding,Yifan Tang,Pingping Gou,Michael J. Reber,Alexander Star

DOI: https://doi.org/10.1002/adma.201003304

IF: 29.4

2010-01-01

Advanced Materials

Abstract:A positive synergy: Single-walled carbon nanotube/polyaniline (SWNT/PAni) nano-composite with controlled core/shell morphology is synthesized by a noncovalent functionalization approach. Unique electron interactions between the SWNT core and the PAni shell are studied electrochemically and spectroscopically, and superior sensor performance to chemical gases and vapors is demonstrated.
High-performance electric and optical biosensors based on single-walled carbon nanotubes

Ping Liu,Yuechao Jiao,Xuzhao Chai,Yanxia Ma,Sheng Liu,Xiangqian Fang,Fuling Fan,Li Xue,Jianxun Han,Qin Liu

DOI: https://doi.org/10.1016/j.jlumin.2022.119084

IF: 3.6

2022-10-01

Journal of Luminescence

Abstract:As a quasi-one dimensional nanomaterial, carbon nanotubes (CNTs) are multifunctional nanomaterials with outstanding electronic, optical, and chemical properties due to large specific surface area, ultrahigh length/diameter ratio, and easy chemical functionalization, which make them promising candidates for high-performance biosensors. Among different type of biosensors, since the main sensing mechanism is to detect the change in the electric or optical properties of CNTs toward the target bio-molecules, single-walled CNTs (SWCNTs) with all atoms on the surface are expected to have greater potential than multi-walled CNTs to fabricate highly sensitive sensing devices. Especially, the chiral-related electronic and optical properties enable SWCNT-based biosensors have more selectivity and realizability by choosing specific semiconducting SWCNTs. With the development of selective synthesis technology of semiconducting SWCNTs, it is believed that semiconducting SWCNTs, preferably monochiral nanotubes, will be widely used to explore next-generation high-performance biosensors. Herein, we comprehensively summarize the latest advances in the SWCNT-based field effect transistor (FET) and optical biosensors. The basic structure and physical properties of SWCNTs are firstly introduced, and then the recent development of SWCNT-FET biosensors and optical biosensors has been systematically summarized, respectively. Finally, we also discuss the current challenges about the SWCNT synthesis and bio-sensing devices, and further perspectives will also be provided for this fast‐developing field.

optics
Single-walled carbon nanotubes as optical materials for biosensing.

Zhuo Chen,Xiaobing Zhang,Ronghua Yang,Zhi Zhu,Yan Chen,Weihong Tan

DOI: https://doi.org/10.1039/c0nr01014f

IF: 6.7

2011-01-01

Nanoscale

Abstract:In this review, we summarize recent progress in the development of single-walled carbon nanotubes (SWNTs) as optical materials for biosensing applications. First, as optical labels, we discuss the use of SWNTs in Raman-based protein detection. Strong and simple resonance Raman spectroscopy of SWNTs opens up a method of protein microarray with detection sensitivity down to femtomolar range. Also, tunable isotopic SWNT-Raman signature enables the simultaneous detection of multiple analytes in complex fluids. Second, the photoluminescence properties of SWNTs are also explored. We examine fluorescence biosensors that integrate the quenching property of SWNTs and the recognition property of functional nucleic acids. Particularly, SWNTs are established as an efficient signal transduction substrate in different biosensing systems, including the detection of specific proteins and DNA sequences, regulation of singlet oxygen generation and label-free fluorescence assays, and all have exhibited very high selectivity and sensitivity.
Silver Nanoparticles Anchored on Single-Walled Carbon Nanotubes via a Conjugated Polymer for Enhanced Sensing Applications

Jianfu Ding,Zhao Li,Oltion Kodra,Martin Couillard,Jianying Ouyang,Patrick R. L. Malenfant,François Lapointe

DOI: https://doi.org/10.1021/acsomega.3c01127

IF: 4.1

2023-04-25

ACS Omega

Abstract:Single-walled carbon nanotubes (SWCNTs) are candidate matrices for loading metal nanoparticles (NPs) for sensor and catalytic applications owing to their high electron conductivity and mechanical strength, larger surface area, excellent chemical stability, and ease of surface modification. The performance of the formed NP/SWCNT composites is dependent on the NP size, the physical and chemical interactions between the components, and the charge transfer capabilities. Anchoring metal complexes...

chemistry, multidisciplinary
Synthesis and Morphology Control of Carbon Nanotube/Polyaniline Composite for Chemical Sensing

Mengning Ding,Alexander Star

DOI: https://doi.org/10.1557/opl.2012.31

2011-01-01

Abstract:Composites of single-walled carbon nanotubes (SWNTs) and polyaniline (PAni) were synthesized using different approaches. SWNT/PAni nanocomposite with controlled core/shell morphology was achieved. Our chemical sensing tests showed that such core/shell morphology resulted in superior sensor performance, with an increased sensitivity to acetone vapors, and a reversible detection of hydrazine vapors. The reversible detection of parts-per-billion concentrations of hydrazine offers promise for a portable solid-state detector that has potential application in aerospace.
Space-confined Synthesis of SWNT Bundles Wrapped by MoS2 Crystalline Layers As Flexible Sensors and Detectors

Yunxing Li,Rui Pang,Weixue Meng,Ding Zhang,Meng Li,Zhiyuan Xia,Jiyong Feng,Hongbian Li,Anyuan Cao,Yuanyuan Shang

DOI: https://doi.org/10.1016/j.carbon.2022.04.002

IF: 10.9

2022-01-01

Carbon

Abstract:Single-walled carbon nanotubes (SWNTs) are ideal template for constructing one-dimensional (1D) heterojunctions with intriguing optical and electrical properties, yet it remains challenging to wrap foreign materials around SWNTs due to their very small diameter and large curvature. Here, we present a space-confined method to synthesize SWNT bundles wrapped by MoS2 crystalline layers (SWNT@MoS2) film by embedding a pristine SWNT film within a porous multi-walled nanotube sponge, which acts as a liquid precursor container for hydrothermal reaction. We find that crystalline MoS2 sheets could be formed around the outer surface of SWNT bundles uniformly and continuously, with tailored number of multi-layers (3-17 layers), for bundle sizes ranging from several to hundreds of nanometers. The resulting SWNT@MoS2 network shows much enhanced light response and gas sensitivity, presenting promising applications as flexible photo-detectors and toxic gas sensors. Our scalable synthesis method and SWNT-based coaxial-cables will be useful in future developing innovated 1D van der Waals heterojunctions and flexible nanoelectronic systems.
Composite films of poly(3-hexylthiophene) grafted single-walled carbon nanotubes for electrochemical detection of metal ions.

Shaojun Yang,Dongli Meng,Jinhua Sun,Yan Huang,Yong Huang,Jianxin Geng

DOI: https://doi.org/10.1021/am500973m

IF: 9.5

2014-01-01

ACS Applied Materials & Interfaces

Abstract:In this study, we prepared electrochemically active films of poly(3-hexylthiophene) grafted single-walled carbon nanotubes (SWNT-g-P3HT) by using a modified vacuum-assisted deposition approach, in which a SWNT-g-P3HT composite layer of various thicknesses was deposited on the top of a thin SWNT layer. Measurement of the optical and electrical properties of the SWNT-g-P3HT composite films demonstrated that the thickness of the SWNT-g-P3HT composite films was controllable. The data of transmission electron microscope observation and Raman spectroscopy indicated that the covalent grafting of P3HT onto the surfaces of SWNTs resulted in intimate and stable connectivity between the two components in the SWNT-g-P3HT composite. Capitalizing on these unique features, we successfully developed a new class of electrochemical sensors that used the SWNT-g-P3HT composite films deposited on an indium-tin oxide substrate as an electrochemical electrode for detection of metal ions. Significantly, such a SWNT-g-P3HT composite electrode showed advantages in selective, quantitative, and more sensitive detection of Ag(+) ions.
Nanotubes in Biosensing

Jianping Lei,Huangxian Ju

DOI: https://doi.org/10.1002/wnan.94

2010-01-01

Abstract:Carbon nanotubes (CNTs) have extensively been used for electrochemical and optical biosensing due to the unique mechanical, chemical, and electrical properties. This review introduces two functionalization categories, noncovalent interaction along the CNTs sidewalls via physical adsorption or entrapment and covalent binding via carboxylate chemistry or nonselective attack of nanotube sidewalls by highly reactive species and gives an overview on the functionalized CNTs-based biosensing methodologies for DNA, antigen-antibody, cells, and other biological molecules. Furthermore, the in vivo near-IR fluorescence biosensing application of CNTs with high photostability and efficiency is discussed. Finally, field-effect transistors based on semiconductor CNTs are also summarized for ultrasensitive detection. Biosensors based on CNTs provide a significant avenue for the detection of biomolecules in vivo and in vitro applications. (C) 2010 John Wiley & Sons, Inc. WIREs Nanomed Nanobiotechnol 2010 2 496-509
Chemical functionalization of single-walled carbon nanotube field-effect transistors as switches and sensors

Song Liu,Qian Shen,Yang Cao,Lin Gan,Zhenxing Wang,Michael L. Steigerwald,Xuefeng Guo

DOI: https://doi.org/10.1016/j.ccr.2009.11.007

IF: 24.833

2010-01-01

Coordination Chemistry Reviews

Abstract:Because of the one-dimensional (1D) nanostructural nature of single-walled carbon nanotubes (SWNTs) and their advantages of chemical flexibility and sensitivity arising from the susceptibility of their active surfaces to interacting species, great effort has been made to integrate carbon nanotube field-effect transistors (NTFETs) into functional optoelectronic devices capable of converting external stimuli to easily detectable electrical signals. In this Review article, we aim to capture recent advances of rational design and chemical functionalization of NTFETs for the purpose of switching or biosensing applications. To provide a deeper understanding of the device responses to analytes, this review will also survey the proposed sensing mechanisms. As demonstrated by these remarkable examples, the concept of combining the proper selection of functional molecular materials and molecular self-assembly with device micro/nanofabrication offers attractive new prospects for constructing NTFET-based molecular optoelectronic devices with desired functionalities.
Fluorescent Chromophore Functionalized Single-Wall Carbon Nanotubes with Minimal Alteration to Their Characteristic One-Dimensional Electronic States

WH Zhu,N Minami,S Kazaoui,Y Kim

DOI: https://doi.org/10.1039/b303885h

2003-01-01

Journal of Materials Chemistry

Abstract:Soluble, chromophore-functionalized SWNTs (SWNT-NA) have been synthesized via covalent bonding with minimal alteration to the characteristic one-dimensional electronic states of SWNTs. The key step in the molecular design includes incorporating a naphthalimide fluorescent moiety onto SWNTs via the amidation of oxidatively etched SWNTs, where the solubility of the product is brought about by N-octadecyl groups that are attached to naphthalimide. SWNT-NA can be fabricated into in-plane aligned thin films by using the Langmuir-Blodgett (LB) method. The surface pressure-area isotherm is characterized by a steep rise in pressure as well as by a high collapse pressure (up to 40 mN m(-1)), which indicates that SWNT-NA possesses a good surface spreading property at the air/water interface. The polarized UV-Vis-NIR absorption spectrum of an SWNT-NA LB film (40 layers) by vertical dipping indicates a dichroic ratio of 2.42 at 1340 nm and AFM images show that tubes are preferentially aligned in the dipping direction. Electronic properties of the product were investigated by absorption and luminescence (steady-state and transient) spectroscopy. Fluorescence from the naphthalimide moiety is found to be significantly quenched when bonded to the SWNT backbones.
Non-covalent Methods of Engineering Optical Sensors Based on Single-Walled Carbon Nanotubes

Alice J. Gillen,Ardemis A. Boghossian

DOI: https://doi.org/10.3389/fchem.2019.00612

IF: 5.5

2019-09-19

Frontiers in Chemistry

Abstract:Optical sensors based on single-walled carbon nanotubes (SWCNTs) demonstrate tradeoffs that limit their use in <i>in vivo</i> and <i>in vitro</i> environments. Sensor characteristics are primarily governed by the non-covalent wrapping used to suspend the hydrophobic SWCNTs in aqueous solutions, and we herein review the advantages and disadvantages of several of these different wrappings. Sensors based on surfactant wrappings can show enhanced quantum efficiency, high stability, scalability, and diminished selectivity. Conversely, sensors based on synthetic and bio-polymer wrappings tend to show lower quantum efficiency, stability, and scalability, while demonstrating improved selectivity. Major efforts have focused on optimizing sensors based on DNA wrappings, which have intermediate properties that can be improved through synthetic modifications. Although SWCNT sensors have, to date, been mainly engineered using empirical approaches, herein we highlight alternative techniques based on iterative screening that offer a more guided approach to tuning sensor properties. These more rational techniques can yield new combinations that incorporate the advantages of the diverse nanotube wrappings available to create high performance optical sensors.

chemistry, multidisciplinary
Single-Walled Carbon Nanotube Field-Effect Transistors With Graphene Oxide Passivation For Fast, Sensitive, And Selective Protein Detection

Jingbo Chang,Shun Mao,Yang Zhang,Shumao Cui,Douglas A. Steeber,Junhong Chen

DOI: https://doi.org/10.1016/j.bios.2012.10.041

2013-01-01

Abstract:We report a novel technique to design an insulating membrane with attachment sites on top of single-walled carbon nanotubes (SWNTs) for achieving high sensitivity and selectivity in an SWNT field-effect transistor (FET) biosensor. Because electronic properties of SWNTs are extremely sensitive to the surface state, direct immobilization of proteins or DNAs onto SWNTs will generate surface defects through chemical reactions or physical adsorption, resulting in degradation of performance and instability of SWNT-FET biosensor devices. Here we demonstrate fabrication of novel FET biosensor devices using SWNTs as semiconducting channels, and a monolayer of graphene oxide (GO) membrane covered on the SWNTs as a passivating layer to avoid direct attachment of biomaterials on SWNTs, thereby preserving intrinsic electrical properties of SWNTs. Gold nanoparticles (Au NPs) are decorated on the GO layer for the covalent attachment of biotin, Which is then used to selectively detect the target avidin. The passivation with GO layers can effectively lead to enhanced sensitivity of biosensor devices through increasing the on/off ratio of FET sensors. (C) 2012 Elsevier B.V. All rights reserved.
Noncovalent assembly of carbon nanotubes and single-stranded DNA: an effective sensing platform for probing biomolecular interactions.

Ronghua Yang,Zhiwen Tang,Jilin Yan,Huaizhi Kang,Youngmi Kim,Zhi Zhu,Weihong Tan

DOI: https://doi.org/10.1021/ac801118p

IF: 7.4

2008-01-01

Analytical Chemistry

Abstract:In this paper, we report the assembly of single-walled carbon nanotubes (SWNTs) and single-stranded DNA to develop a new class of fluorescent biosensors which are able to probe and recognize biomolecular interactions in a homogeneous format. This novel sensing platform consists of a structure formed by the interaction of SWNTs and dye-labeled DNA oligonucleotides such that the proximity of the nanotube to the dye effectively quenches the fluorescence in the absence of a target. Conversely, and very importantly, the competitive binding of a target DNA or protein with SWNTs for the oligonucleotide results in the restoration of fluorescence signal in increments relative to the fluorescence without a target. This signaling mechanism makes it possible to detect the target by fluorescence spectroscopy. In the present study, the schemes for such fluorescence changes were examined by fluorescence anisotropy and fluorescence intensity measurements for DNA hybridization and aptamer-protein interaction studies.
Non-Covalent Functionalization of Carbon Nanotubes for Electrochemical Biosensor Development

Yan Zhou,Yi Fang,Ramaraja P. Ramasamy,Ramaraja Ramasamy

DOI: https://doi.org/10.3390/s19020392

IF: 3.9

2019-01-18

Sensors

Abstract:Carbon nanotubes (CNTs) have been widely studied and used for the construction of electrochemical biosensors owing to their small size, cylindrical shape, large surface-to-volume ratio, high conductivity and good biocompatibility. In electrochemical biosensors, CNTs serve a dual purpose: they act as immobilization support for biomolecules as well as provide the necessary electrical conductivity for electrochemical transduction. The ability of a recognition molecule to detect the analyte is highly dependent on the type of immobilization used for the attachment of the biomolecule to the CNT surface, a process also known as biofunctionalization. A variety of biofunctionalization methods have been studied and reported including physical adsorption, covalent cross-linking, polymer encapsulation etc. Each method carries its own advantages and limitations. In this review we provide a comprehensive review of non-covalent functionalization of carbon nanotubes with a variety of biomolecules for the development of electrochemical biosensors. This method of immobilization is increasingly being used in bioelectrode development using enzymes for biosensor and biofuel cell applications.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
Carbon Nanotube-Based Fluorescence Sensors

Chun Li,Gaoquan Shi

DOI: https://doi.org/10.1016/j.jphotochemrev.2013.10.005

2014-01-01

Abstract:The one-dimensional pi-conjugated structure endows carbon nanotube (CNT) with large specific surface area and excellent photophysical properties, thus providing a unique platform for the development of chemo- and biosensors based on optical signal output. Although CNT acts as an optical signal transducer, it does not own any intrinsic ability for the selective binding and recognition of analytes. Thus, hybridization of CNTs with functional components that specifically recognize various chemical and biomolecular analytes is often necessary in the preparation of CNT-based sensors. In this review, we summarize preparation and photophysical properties of CNT-based composites, and then highlight on fluorescence sensors based on CNT-composites. These composite sensors integrate the signal transduction property of CNT and the recognition properties of the hybridized functional components. The functional components selectively bind with the target analytes, whereas, CNTs transform the binding events into output signals detectable using spectrofluorometer. Particularly, we highlight on recent progress in the chemical and bimolecular sensors based on near-infrared fluorescence of semiconducting single-walled CNT (SWCNT) and the excellent fluorescence quenching ability of CNTs over conventional organic quenchers. (C) 2013 Elsevier B.V. All rights reserved.
Ferrocene-filled single-walled carbon nanotubes

Lunhui Guan,Zujin Shi,Meixian Li,Zhennan Gu

DOI: https://doi.org/10.1016/j.carbon.2005.05.025

IF: 10.9

2005-01-01

Carbon

Abstract:Ferrocene molecules are successfully introduced into the inner hollow space of Single-walled carbon nanotubes (SWNTs) to get ferrocene-filled SWNTs (Fc@SWNTs). This nanohybrid material was carefully characterized by high resolution microscopy, FTIR spectrum, and Cyclic voltammetry (CV). This new material may not only act as air stable n-type field-effect transistors based on nanotubes, but it may also be employed as building blocks for various devices based on the redox activity of ferrocene. What’s more, upon high temperature annealing, the encapsulated ferrocene molecules will decompose and change into interior tubes, forming double-walled carbon nanotubes (DWNTs). This provides convincing evidence that ferrocene molecules are inserted into the hollow cavities SWNTs. This result also presented a controllable way to synthesize DWNTs.

New anthracene-tetrathiafulvalene derivative-encapsulated SWNT nanocomposite and its application for biosensing.

Carbon Nanotube DNA Sensor and Sensing Mechanism.

Preparation of CNTs/PANi core/shell-structured nanowires and improvement of sensitivity of chemical sensors

Synthesis of water-soluble phosphonate functionalized single-walled carbon nanotubes and their applications in biosensing

A New Application of Carbon Nanotubes Constructing Biosensor

Chemical Sensing with Polyaniline Coated Single‐Walled Carbon Nanotubes

High-performance electric and optical biosensors based on single-walled carbon nanotubes

Single-walled carbon nanotubes as optical materials for biosensing.

Silver Nanoparticles Anchored on Single-Walled Carbon Nanotubes via a Conjugated Polymer for Enhanced Sensing Applications

Synthesis and Morphology Control of Carbon Nanotube/Polyaniline Composite for Chemical Sensing

Space-confined Synthesis of SWNT Bundles Wrapped by MoS2 Crystalline Layers As Flexible Sensors and Detectors

Composite films of poly(3-hexylthiophene) grafted single-walled carbon nanotubes for electrochemical detection of metal ions.

Nanotubes in Biosensing

Chemical functionalization of single-walled carbon nanotube field-effect transistors as switches and sensors

Fluorescent Chromophore Functionalized Single-Wall Carbon Nanotubes with Minimal Alteration to Their Characteristic One-Dimensional Electronic States

Non-covalent Methods of Engineering Optical Sensors Based on Single-Walled Carbon Nanotubes

Single-Walled Carbon Nanotube Field-Effect Transistors With Graphene Oxide Passivation For Fast, Sensitive, And Selective Protein Detection

Noncovalent assembly of carbon nanotubes and single-stranded DNA: an effective sensing platform for probing biomolecular interactions.

Non-Covalent Functionalization of Carbon Nanotubes for Electrochemical Biosensor Development

Carbon Nanotube-Based Fluorescence Sensors

Ferrocene-filled single-walled carbon nanotubes