Abstract:The high-precision modeling and collision simulation of UAVs should be conducted to achieve the dynamic response of UAV and assess UAV safety. In this paper, a high-precision finite element model of small rotor logistics UAVs on the market was built in LS-DYNA. The process to model the connection structure between a range of parts of a UAV was elucidated in detail. The bolt, damping spring and rivet & thread were respectively simulated with “NRB + beam”, “NRB + discrete” and “spot weld”. By a series of static and dynamic material tests, the constitutive parameters of main materials of UAV structure were determined. Besides, a reasonable explicit time step was set by regulating the mass scaling of local elements. To verify whether the finite element model of UAV is accurate, UAV underwent a developed full-scale crash test. As revealed from the experimentally achieved results, the trend of impact load over time in collision simulation significantly complied with the experimentally achieved results, and the discrepancy between the maximum impact load peak and the experimentally achieved results only took up 6.54%. Moreover, the vital damaged parts, damaging process and failure mode of the UAV structure in the crash test were accurately characterized in the collision simulation. Thus, the UAV modeling and collision simulation was verified to exhibit feasibility. Lastly, with the verified UAV high-precision model, the impacting process, possible damaged parts and failure modes of UAV at the variety of angles and speeds were assessed. Accordingly, the proposed high-precision modeling and collision simulation of small rotor UAV is capable of saving the physical and time resources of UAV structural strength experiments, as well as effectively assessing the structural safety and improving the design of small rotor UAVs.

Simulation Research of the Atmosphere disturbance and Its Influence on UAV Automatic Landing

Simulation Research into Influence of Wind Disturbance on Unmanned Aerial Vehicle

Study of Modeling and Control Simulation for Flying-wing UAV in Ground Motion During Landing

On Navigation Control of UAV in Recovery Stage to Ensure Reliable Parachute Landing on Assigned Spot with Wind Disturbance Estimation Considered

Research on the Dynamics Simulation of Landing Ship of the Flexible Flying Wing UAV

Output Feedback Controller Design and Simulation for UAV Consider Atmospheric Disturbance

High-precision Modeling and Collision Simulation of Small Rotor UAV

Three-Dimensional Spatial Atmospheric Turbulence Generation Method for Aerial Refueling Flight Simulation

Research on Dropping Test and Numerical Simulation for Unmanned Aerial Vehicle

Vertical Modeling and Autonomous Landing of a Mini Unmanned Helicopter

Automatic Landing System Design for Unmanned Fixed-Wing Vehicles Via Multivariable Active Disturbance Rejection Control

Application of Vision-Based UAV Landing Hardware-in-loop Simulation System

Precision Landing of Unmanned Aerial Vehicle under Wind Disturbance Using Derivative Sliding Mode Nonlinear Disturbance Observer-Based Control Method

UAV Anti-Skid Braking System Simulation

The Numerical Simulation of UAV's Landing in Ship Airwake

A UAV Autonomous Landing System Integrating Locating, Tracking, and Landing in the Wild Environment

Low Altitude Vertical Guidance and Suppression of Elevator Transient Jump during UAV's Automatic Landing

Three-dimensional visual simulation of civil aircraft taking off in wind shear

Modeling and Control of an Aerial Flight Platform Using for Fixed-Wing UAV Landing.

Saturating Controller Design of UAVs Based on Markovian Jump Model

Experimental study of microburst effects on airfoil for micro/unmanned aerial vehicle applications