Abstract:A new electrode configuration was proposed to improve the performance of color ac plasma display panels (PDPs). ITO electrodes on the front plate of a PDP were used as auxiliary sustain electrodes, which were electrically isolated from the metal electrodes by a dielectric isolation layer. When this type of PDP operates, the sustain voltage waveforms are only applied to the metal electrodes, so the ITO electrodes always lie in floating potentials. By numerical simulation, the microdischarge process in a PDP cell with floating auxiliary electrodes was analyzed, and the influence of the insulation layer thickness on the cell electrical parameters was investigated. It was found that a discharge in the cell was firstly generated at the narrow gap between a pair of floating electrodes, and then it grew into a long-path discharge including a positive column region between a pair of metal electrodes. Two 12-inch test panels having this floating-electrode-type cell structure were fabricated, together with two other test panels as references having a conventional cell structure and a regular long-gap cell structure, respectively, and their electrical and optical characteristics were measured and compared to each other. The results indicate that the PDP with floating electrodes can achieve a high luminance and a high luminous efficacy at a relatively low sustain voltage.

Adaptive address energy recovery circuit for reducing address power in color PDPs.

Development of Self-Adapt Low Power Addressing Technique in Plasma Display Panel

Adaptive Subfield Data Optimization for Low AddressPower in Plasma Display Panel

Efficient Frame Rate Control Algorithm and Its Implementation

Reducing Average Address Power Of Color Pdps

Study on Automatic Power Control in Color Plasma Display Panel

Adaptive Subfield Data Optimization For Low Address Power In Pdps

A Review of Energy Recovery Circuits for Plasma Display Panels

Energy Recovery Circuit with Auxiliary Power Supply for AC Plasma Display Panel

Relationship Between Address Power And Address Data In Color Plasma Display Panels

Design of a Scan Driver IC for Plasma Display Panel

A data-dependent energy reduction algorithm for SAR ADC using self-adaptive window

A Method of Modifying Display Gray Levels for Reducing the Dynamic False Contour in Alternating Current Plasma Display Panel

Alternating Current Plasma Display Panel with Two Trigger Discharge Sites and Its Driving Techniques

A real-time image processor with combining dynamic contrast ratio enhancement and inverse gamma correction for PDP.

Electrical and Optical Characteristics of a Color Alternating Current Plasma Display Panel with Floating Electrodes

Low-Power Driving Waveform Design for Improving the Display Effect of Electrophoretic Electronic Paper

Sustain Driving Method With High-Impedance State For Plasma Display Panel

New Dynamic Composite Addressing Method for Improving Dynamic False Contours on Color Plasma Display Panel

New Driving Method for Color Plasma Display Panel

Electrophoretic Display Controller Integrated With Real-Time Halftoning and Partial Region Update