Abstract:Experiment evaluation and mechanism analysis of separation performance are crucial for oily wastewater treatment. In this work, a fluorinated superhydrophobic/superoleophilic (F-SHPB/SOPL) surface was fabricated on a steel mesh substrate by double depositions of SiO2-TiO2 nanoparticles for high-roughness improvement and composite modification of fluorine-alkyl groups for low-energy achievement. Measurements of SEM, XPS, FTIR, laser scanning confocal microscope (LSCM), and excitation-emission matrix (EEM) were carried out for surface property characterization. The oil-water separation performances at the prepared F-SHPB/SOPL surface were investigated from experimental and simulation aspects. Separation tests, flux tests, and anti-contamination tests were performed by experimental methods. The results indicated that the surface showed excellent separation efficiencies (>99.2%) for oil-water mixture and oil-in-water emulsion, high permeate flux (>3000 L·m-2·h-1) for organic oils, and perfect anti-pollution/self-cleaning capacity for liquid and solid contaminations. The interaction energies and interaction distances were measured by ab initio molecular dynamics simulation (AIMD) simulations. With lower interaction energy (Eoil = -456.52∼-1044.22 eV) than that of water molecules (Ewater = -172.73 eV) and shorter distance (Doil = 4.42∼5.13 Å) than that of water molecules (Dwater = 11.49 Å), oil molecules showed higher interaction stability than water molecules on the F-SHPB/SOPL surface. The calculation revealed the essence of the oil-water separation phenomenon. This work not only proposes the fabrication methodology of the SHPB/SOPL material but also elucidates the intermolecular interaction for oil-water separation. The results can provide a fundamental basis for separation operation and removal treatment in industrial and domestic applications.

Centrifugal Sedimentation Separation of TiO_2 Particles from Liquid Phase

Study on Separation Mechanism of Falcon Concentrator and Its Application

Stability of TiO 2 Nanoparticles in Deionized Water with ZrP Nanoplatelets

Dispersion Stability of Tio2-H2o Nanofluids Containing Mixed Nanotubes and Nanosheets

Disc Ceramic Membrane Modified with Nano-Tio2 for Separating Oil-Water Emulsion under Dynamic Membrane Filtration

Improved Dispersion Stability of Water-Based Tio2 Nanofluids Through Combined Effects of Nanoparticle Mixing and Dispersant Addition

Efficient Oil-Water Separation with Amphipathic Magnetic Nanoparticles of Fe3O4@TiO2

Study on Adsorption and Reaction Mechanism of Preparation of TiO2/SiO2 by Adsorption Phase Reactor Technique

High performance separation of aerosol sprayed mesoporous TiO2 sub-microspheres from aggregates via density gradient centrifugation

Centrifugal Separation of Titanium Isotopes Using Titanium Tetrachloride As Processing Gas

Dispersion Behavior of Ultrafine Titanium Dioxide Particles in Aqueous Solution

Integrated oil separation and water purification by a double-layer TiO2-based mesh

A Novel Method for Purification of Low Grade Diatomite Powders in Centrifugal Fields

Preparation of ultra-fine TiO2 particles using micro-mixing precipitation technology

Integrated oil separation and water purification by a double-layer TiO 2-based mesh

In Situ Ultrafast Separation and Purification of Oil/water Emulsions by Superwetting TiO2 Nanocluster-Based Mesh.

Study of Sedimentation Process for Titania Pigment and Polyacrylic Dispersant Water-Borne System

De-Agglomeration and Dispersion of Nano-Tio2 in an Agitator Bead Mill

Gravity Separation Tests of a Complex Rutile Ore

The Application of a New Type of Hydraulic Classification Equipment: Swirl Continuous Centrifugal Separator

Investigation of Oil-Water Separation on an F-SiO2/TiO2-Based Superhydrophobic/Superoleophilic Surface: Experiment Evaluation and MD Simulation.