Abstract:Objective: In car crashes, the passenger compartment deceleration significantly influences the occupant loading. Hence, it is important to consider how each structural component deforms in order to control the passenger compartment deceleration. In frontal impact tests, the passenger compartment deceleration depends on the energy absorption property of the front structures. However, at this point in time there are few papers describing the components' quantitative contributions on the passenger compartment deceleration. Generally, the cross-sectional force is used to examine each component's contribution to passenger compartment deceleration. However, it is difficult to determine each component's contribution based on the cross-sectional forces, especially within segments of the individual members itself such as the front rails, because the force is transmitted continuously and the cross-sectional forces remain the same through the component. Method: The deceleration of a particle can be determined from the derivative of the kinetic energy. Using this energy-derivative method, the contribution of each component on the passenger compartment deceleration can be determined. Using finite element (FE) car models, this method was applied for full-width and offset impact tests. This method was also applied to evaluate the deceleration of the powertrain. The finite impulse response (FIR) coefficient of the vehicle deceleration (input) and the driver chest deceleration (output) was calculated from Japan New Car Assessment Program (JNCAP) tests. These were applied to the component's contribution on the vehicle deceleration in FE analysis, and the component's contribution to the deceleration of the driver's chest was determined. Result: The sum of the contribution of each component coincides with the passenger compartment deceleration in all types of impacts; therefore, the validity of this method was confirmed. In the full-width impact, the contribution of the crush box was large in the initial phases, and the contribution of the passenger compartment was large in the final phases. For the powertrain deceleration, the crush box had a positive contribution and the passenger compartment had a negative contribution. In the offset test, the contribution of the honeycomb and the passenger compartment deformation to the passenger compartment deceleration was large. Based on the FIR analysis, the passenger compartment deformation contributed the most to the chest deceleration of the driver dummy in the full-width impact. Conclusions: Based on the energy-derivative method, the contribution of the components' deformation to deceleration of the passenger compartment can be calculated for various types of crash configurations more easily, directly, and quantitatively than by using conventional methods. In addition, by combining the energy-derivative method and FIR, each structure's contribution to the occupant deceleration can be obtained. The energy-derivative method is useful in investigating how the deceleration develops from component deformations and also in designing deceleration curves for various impact configurations.

A Study on the Equivalent Dual-trapezoids Deceleration Curve Used in Sled Test for Frontal Crash Simulation

An Analysis on the Sensitivity of Main Dummy Injury Criteria to Equivalent Dual-trapezoid Deceleration Curve

Relationship Study on Equivalent Dual-trapezoid Curve Characteristics and Occupant Weighted Injury Criterion

A Correction Method Based on the Simulation and Experiment of Side Sled Collision

Design and Study on Sled Collision Test of Children Occupant Restraint System

A New Method of Simplified Modelling for Atuomobile Frontal Impact Sled

Analysis and Evaluation on the Rear-End Crash of the Car with a Dummy

Simulation Investigation into Crash Performances of Vehicle Child Safety Seat

Study on Correlation between Door Movement and Dummy Injury Response in Side Impact

Development and Application of Steel Bar Energy-Absorbing Type Frontal Impact Sled Test System

Research on Computer Simulation Methods for Automotive Crash

Side Impact Sled Test Using Pre-deformed Door

Dynamic response and energy relationship of a passenger’s different parts in vehicle crash

Proposal of a calculation method to determine the structural components' contribution on the deceleration of a passenger compartment based on the energy-derivative method

Research of Side Crash Sled Test Based on Recursive Least Square Method

Development of Occupant Chest Deflection Analysis for Frontal Impact of Vehicle

Effect of rear-seat submarine on dummy injury and it’s optimization

Effects of a Forward Displaced Position on Driver Injury Levels in Frontal Crashes

Development Strategy of Frontal Crash Dummy Based on Chinese Human Body

Simulation Study of Child Restraint System and Preliminary Analysis of Design Parameters

Pedestrian head injury prediction based on vehicle section image using machine learning.