Abstract:The objective of this study was to use computational models to study how unconventional seating positions and orientations in vehicles with Automated Driving System (ADS) may affect occupant response metrics of children with various restraint conditions. A literature review was first conducted to frame a simulation plan, including selections of surrogate ADS-equipped vehicles, potential seating arrangements, impact scenarios, anthropomorphic test device (ATD) models, and child restraint system (CRS) models that are relevant to the selected ATD models. Due to the lack of impact tests with child ATDs and CRS in farside, oblique, and rear impacts, 17 sled tests were conducted with CRS harness-restrained ATDs and vehicle belt-restrained ATDs in frontal, farside, oblique, and rear impact conditions. The sled tests were then used to validate a set of MADYMO (MAthematical DYnamic MOdels) v7.7 models. A total of 550 simulations were then conducted with four child ATDs and various CRS conditions across a range of conventional and unconventional seating locations and orientations under five impact directions. We did not find major safety concerns with ATDs restrained by harnessed CRSs based on the nature of ATD contacts. Compared with frontal and rear impacts, CRSs may rotate laterally in farside and oblique impacts, which could result in higher head and chest injury measures than frontal due to inertial loading to the CRS, and the larger lateral rotation of the CRS may lead to a contact between the CRS and vehicle interior. The major safety concern for vehicle belt-restrained ATDs (with and without booster) is that they have the potential to contact the seat next to them or the instrument panel behind them in a farside or oblique impact. Unconventional seating does not necessarily create additional safety concerns beyond what we know with the conventional seating. However, due to the orientation of the unconventional seats, the occupants on those seats may be involved in a higher percentage of oblique and rear-oblique impacts relative to their seating orientations than conventional seats, which may be considered in the future safety design process. This is the first study using different child ATDs and CRSs to investigate child occupant responses in a wide range of impact directions and seating orientations. Results from the sled tests and simulations provide a better understanding of child occupant responses in those crash conditions, but also identified several limitations of using frontal ATDs in other crash directions.

Simulation Study of Child Restraint System and Preliminary Analysis of Design Parameters

Simulation Study of Effect of Seat Design Parameters on Occupant Neck Injury Potential in Low-Speed Rear Impact

Factors Influencing Injury Risk and Submarining Tendency of Child Occupant

Impact responses and injury analyses of a three-year-old occupant seating in forward and rearward facing CRSs using different computational models

Child occupant safety in unconventional seating for vehicles with automated driving systems

Lateral impact sled test system for child restraint system based on ECE R129

Research on general layout parameters of I-SIZE child safety seat in frontal impact

A Study on Crash Test on Regulation of Child Restraint System

Analysis of the Possibilities of Improving the Safety of Children Transported in Passenger Cars in Pivoted Child Seat Systems

Safety Performance Comparisons of Different Types of Child Seats in High Speed Impact Tests

Performance evaluation of child safety seats in far-side lateral sled tests at varying speeds

Inlfuence of support leg misuse on the safety performance of child restraint system ISOFIX

Pediatric occupant human body model kinematic and kinetic response variation to changes in seating posture in simulated frontal impacts – with and without automatic emergency braking

Analysis and Improvement for Key Parts of Car Based on Frontal Crashworthiness Simulation

Effect of rear-seat submarine on dummy injury and it’s optimization

The authors simulated a variety of possible real-world frontal and side-impact scenarios via a hybrid finite element (FE) multibody (MB) framework achieved by coupling LS-DYNA and MADYMO

Simulation and Analysis of an Automotive Active Head Restraint

Multi-Parameter and Multi-Objective Optimization of Occupant Restraint System in Frontal Collision

An Experimental Study of the Effects of Child Restraint Improper Installation and Crash Protection for Larger Size Children

Restrain Performance of Child Restraint Systems for 1.5-Year-Old Children on Commercial Airplanes: An Experimental Study

Effects of Booster Seat Sliding on Responses and Injuries of Child Occupant