Abstract:SF 6 gas is widely used in power equipment for its excellent arc extinguishing and insulation properties. However, SF 6 is a strong greenhouse effect gas with a global warming potential (GWP) of 23,500 times that of CO 2 . Therefore, the Kyoto Protocol signed in 1997 has included SF 6 in one of the six greenhouse gases which are restricted for use. Nowadays, finding an environmentally friendly alternative gas for SF 6 is a hot issue in the world. The research on SF 6 environmental alternative gas has made great progress these years. C5F 10 O is considered the most likely gas to replace SF 6 in the near future. Although C 5 F 10 O has a good arc extinguishing property in general, the arc extinguishing mechanism of it in the load switch is not clear. Because arc extinguishing is a complex physical and chemical process involving the interaction of gas flow fields, electromagnetic fields, and ablation the nozzle materials. In this paper, by combining the computational fluid dynamics (CFD) analysis and the Mayr arc model the interruption processes for a load switch filled with 5 % C 4 F 7 N/CO 2 and 5 % C 5 F 10 O/CO 2 at 0.135 MPa, as well as pure SF6 and CO 2 at 0.135 MPa, are investigated. The time constant θ and arc cooling coefficient Q at the current zero point is calculated based on the Mayr equation. In the end, the critical values of the rising rate of the recovery voltage (RRRV) are obtained. These parameters are the most important issues to determine whether breaking success or not. Through the analysis of the post arc medium recovery, the arc extinguishing performance of different gas medium can be theoretically and quantitatively evaluated. It can provide a sufficient theoretical basis to enhance the arc extinguishing ability of the load switch through the CFD analysis.

Survey of Recent Researches on the Arc Quenching Characteristics of SF6 Substitute Gases

Review on Electrical Characteristics of Substitute Arc Extinguishing Gases of Sulfur Hexalfuoride

Fundamental physicochemical properties of SF<sub>6</sub>-alternative gases: a review of recent progress

SF6-alternative gases for application in gas-insulated switchgear

Environmentally-Friendly Switches: Arcing Phenomena in Vacuum and SF 6 Substitutes.

Study of the Arc Interruption Performance of SF 6 Alternative Gas in 35kV Circuit Breaker

Modelling of the Interruption Process in Sf6 High Voltage Circuit Breaker and Preliminary Study of the Arc Characteristics for Different Gases

Study of the Arc Interruption Performance of SF6 Alternative Gases in Load Switch

Research and Application on Physical Farameters Calculation and Behavior Simulation of Gas Switching Arc

Experimental Investigation on the Arc Characteristics and Arc Quenching Capabilities of C5F10O-CO2 Mixtures

Chemical and Electron Interaction Properties of Potential Gaseous Insulation and Arc-quenching Media

Experimental study on characteristics of co 2 and its gas mixtures with sf 6 for high voltage gas circuit breakers

Investigation of Dielectric Properties of Cold C3F8 Mixtures and Hot C3F8 Gas As Substitutes for SF6

The Development of SF6 Green Substitute Gas

Simulation Study on the Arc Extinguishing Performance of Eco-friendly HFO-1336mzz(E)Mixture Gas in a Load Switch

Experimental Studies on Insulation and Arc Extinguishing Performance of C5F10O/CO2 Gas Mixture

To Research on Application and Maintenance of Sulfur Hexafluoride (SF6) Circuit Breaker

Study of the Arc Interruption Performance of Sf6-Co2 Mixtures As A Substitute for Sf6

Experimental Study on Arc Interruption Characteristics of SF6 and Its Mixtures With CF4

Experimental Study of the Arc Plasma Characteristics in SF 6 , N 2 and CO 2 .

Study of the Arc Interruption Performance of CO2 Gas in High-Voltage Circuit Breaker