Abstract:The braking phenomenon is an aspect of vehicle stopping performance where with kinetic energy due to the speed of the vehicle is transformed into thermal energy via the friction between the brake disk and its pads. The heat must then be dissipated into the surrounding structure and the airflow around the brake system. The frictional thermal field during the braking phase between the disk and the brake pads can lead to excessive temperatures. In our work, we presented numerical modeling using ANSYS software adapted in the finite element method, to follow the evolution of the global temperatures for the two types of brake disks, full and ventilated disk during braking scenario. Also, numerical simulation of the transient thermal and the static structural analysis were performed here sequentially, with coupled thermo-structural method. Numerical procedure of calculation relies on important steps such that the computational fluid dynamic (CFD) and thermal analysis have been well illustrated in 3D, showing the effects of heat distribution over the brake disk. This CFD approach helped in the calculation of the values of the heat transfer coefficients (h) that have been exploited in the 3D transient evolution of the brake disk temperatures. Three different brake disk materials were tested and comparative analysis of the results was conducted in order to derive the one with the best thermal behavior. The current numerical results were in good agreement with the previous experimental results available in literature. Finally, the resolution of the coupled thermomechanical model allows us to visualize other important results of this research, such as; the deformations, and the equivalent Von Mises stresses of the disk, as well as the contact pressure distribution on the brake pads. According to the results presented in this investigation, several conclusions can be drawn. The choice allowed us to deliver the excellent rotor design to ensure and guarantee the better braking performance of the vehicles.

Temperature and Stress Distribution for the High-speed Multiple Units Brake Pad

Analyzing Performance of Automobile Brake Drum in 3D Thermo-elastic Coupling Field

Simulation of the Friction Temperature Field for Disc Brake

Simulation Analysis of the Temperature Field and Stress Field of the Brake Shoe of the Heavy-Load Wagon

Numerical simulation on the coupling behavior between thermal load, contact stress and wear in a disc brake

Research on the Influence of Floating Brake Pad Structure on the Friction Interface Performance of Disk Brake

Thermomechanical Coupling Simulation and Analysis of Wet Multi-Disc Brakes During Emergency Braking

Research of Heat Load of Synthetic Brake Shoe with High Frictional Coefficient

The thermo-mechanical coupling method of brake disc based on dynamic convective heat transfer

Study on Fast Finite Element Simulation Model of Thermal Analysis of Vehicle Brake

Thermal fatigue life prediction of brake disks based on coupled thermal simulation

A Novel Numerical Approach for Investigation of the Heat Transport in a Full 3D Brake System of High-Speed Trains

Numerical modeling of heat generation process in a disk brake at three thermal contact conditions over an extended braking distance

Numerical Simulation of the Stress, Temperature & Wear Behaviors of the Drum Brake

The Effect of Functionally Graded Materials on Temperature during Frictional Heating at Single Braking

Simulation Analysis of Thermal Field in a High Speed Electromagnetic Brake

Thermo-Mechanical Coupling Analysis of the Actuating Mechanism in a High Speed Press

The Convective Heat Transfer Characteristics of the Brake Disc Surface of a High-Speed Train

Research on service behaviour of brake pad fastener snap ring during high-speed train braking process

Finite element analysis (FEA) of frictional contact phenomenon on vehicle braking system

Numerical Analysis and Experimental Study on Temperature Field of Brake Disc During the Air-Cooling Process