Abstract:One of the long-standing mechanical challenges associated with shape memory alloys (SMAs) is achieving and stabilizing an evolving two-way shape memory effect (TWSME) through thermomechanical training/cycling. In most martensitic NiTi SMAs that exhibit zero TWSME at room temperature, the TWSMEs typically require hundreds of cycling repetitions to track trivial values. This demonstrates a promising solution to overcome this challenge. The surface of NiTi SMA sheets was treated by depositing a certain number of titanium (Ti) powder layers on the NiTi surface using a laser beam. The results showed that a unique TWSME of approximately 12% with good stability was achieved after 100 cycles when the optimum number of five Ti layers was deposited, which was much higher than that of the NiTi sheet (0.3% TWSME) and the sample with a single-time laser path irradiation (1.8%). This was attributed to the low coefficient of thermal expansion of the Ti vs. NiTi sheet, which prevented reverse bending during heating, and the formation of Ti-rich intergranular Ti2Ni(Ox) precipitates, which hindered dislocation movement. Meanwhile, in this sample, owing to the generation of a large residual tensile stress and a large heat-affected zone that led to a reduction in plastic zones, the one-way shape memory effect (OWSME) was retained at values above 90% with good stability over cycling. However, the introduction of additional Ti layers can cause problems in terms of oxygen accumulation within the NiTi sheet, which should be considered when designing a product.

Deposition of TiN Layer on TiNi Thin Films to Improve Surface Properties

TiNi shape memory alloy coated with tungsten: a novel approach for biomedical applications

Microstructure and Characteristics of Ion-nitrided Layer on Surface of NiTi SMAs

Fabrication, Nanomechanical Properties And In Vitro Evaluation Of (Ti, O)/Ti Composite Coating On Niti Shape Memory Alloy

Formation of TiN films on biomedical NiTi shape memory alloy by PIIID

Laser deposition of titanium layer to enhance two-way shape memory behavior of Nitinol sheet

Fabrication of (Ti, Si, O, N)/Ti composite coating on NiTi shape memory alloy using PIIID and coating evaluation

Surface Microstructures and Corrosion Resistance of Ni-Ti-Nb Shape Memory Thin Films

Study on Phase Transformation and Electrochemical Corrosion of TiNi Alloy Formed by Laser Solid Forming

Microstructure and Shape Memory Behavior of Ti-Nb Shape Memory Alloy Thin Film

Deposition and nanoindentation study of a novel TiNi/Ag bi-layer shape memory film

Surface Treatment of NiTi Shape Memory Alloy by Modified Advanced Oxidation Process

Fabrication of (Ti-O-N-Si)/Ti Composite Coating on NiTi Shape Memory Alloy Using PIIID and Coating Evaluation

Research Progress Of Medical Tini Alloy Surface Modification Technology

Surface modification of NiTi alloy via a TiN coating functionalized with biomimic multilayer films

Biomimetic deposition of apatite coating on NiTi shape memory alloy after a composite bioactive treatment

Fabrication of Titania Film on Niti Alloy by A Deposition-Assisted Advanced Oxidation Method

Characteristics and in Vitro Biological Assessment of (ti, O, N)/Ti Composite Coating Formed on Niti Shape Memory Alloy

Research Progress on Surface Modification of Biomedical TiNi Shape Memory Alloys

Surface Modification with SiO2 Coating on Biomedical TiNi Shape Memory Alloy by Sol–gel Method

In Vitro and in Vivo Evaluation of Porous NiTi Alloy Modified by Sputtering a Surface TiO2 Film