Abstract:Hydrogen bond interactions are important for nylon fibers, which improve its mechanical properties and crystallization behavior, while hindering the movement and orientation of the molecular chain during the drawn process. In this study, hexamethylene adipamide was used as the second monomer in copolymerization with ε-caprolactam to obtain copolyamide 6/66 (CoPA), and high-tenacity fibers with a maximum value up to 8.0 cN/dtex were achieved by a multi-step drawn and thermal setting process. Results show that the hexamethylene–adipamide ratio affected the draw ratio (DR) of the as-spun fiber, on the tenacity of final high-performance fiber, and on crystalline. Both DR and tenacity showed evident increases with the hexamethylene–adipamide ratio up to 6% in CoPA and then changed smoothly. However, XRD and DSC results illustrate a decreased tendency with regard to crystallinity. The attenuated in-site total reflection Fourier transform infrared (ATR-FTIR) spectra were used to study the hydrogen bond interaction between the C=O group and N–H group and the crystal form of the fiber. Results show that the copolymerization destroyed the regularity of the main chain of CoPA and reduces the interaction of interstrand hydrogen bonds, facilitating the formation of the γ-crystalline form in as-spun fibers, fulfilling the transition from the γ to α crystalline form during the fiber-drawing step because of the release of the C=O group and N–H group from the hydrogen bond interaction at an elevated temperature close to the molten temperature of CoPA, and then reforming during the thermal-setting step which soiled the crystalline and improved the tenacity of the fiber. The copolymerization with a homologous monomer regulates the hydrogen bond interaction, fulfills the high drawn ratio and high tenacity fiber, and provides a new route for high-performance fiber preparation using traditional fiber formation of polymers.

Tensile Properties of the Large Diameter PA6/PA66 Copolymer Monofilaments

Drawing and Ultimate Tensile Properties of Modified Polyamide 6 Fibers

Structure Evolution and Properties Enhancement of Polyamide‐6/polyamide‐1010 Films under Uniaxial and Biaxial Stretching

Study on the Tensile Properties of the large Diameter PPS Monofilament

The effect of stretching on polyamide – 6: assessment of crystallinity, mechanical properties, and surface roughness

Study on the Structure and Performance of the Large Diameter Pps/Pa(6) Blending Monofilaments

The Structural Evolution and Mechanical Properties of Semi-Aromatic Polyamide 12T after Stretching

The Effect of Cooling Temperature on the Structure and Properties of PP/PP-g-MAH/PA6 Blend Monofilaments

Additive Manufacturing of Polyamide 66: Effect of Process Parameters on Crystallinity and Mechanical Properties

Structure and Performance of High Dtex PET-PBT Blending Mono Filaments

Copolymerization-Regulated Hydrogen Bonds: A New Routine for High-Strength Copolyamide 6/66 Fibers

Structure and property changes of polyamide 6 during the gel-spinning process

Investigation on the biaxial stretching deformation mechanism of PA6 film based on finite element method

Toughening of Bio-Based PA 6.19 by Copolymerization with PA 6.6 - Synthesis and Production of Melt-Spun Monofilaments and Knitted Fabrics

The heat treatment of the large diameter filter monofilaments

Structure and Mechanical Properties of Poly(Ethylene Terephthalate)/Poly(Butylene Terephthalate) Blended Monofilaments

Investigation on the Correlation between Biaxial Stretching Process and Macroscopic Properties of BOPA6 Film

Investigation on the rheological behavior of PA6 film during biaxial stretching

Synthesis and characterizations of random copolyamide PA(56- co -66): Excellent toughness and transparency

Polypropylene/polyamide 6/Polypropylene- G -Maleic Anhydride Blending Monofilaments: Effects of Quench Temperature

Dynamics and structure development for biaxial stretching PA6 films