Abstract:The inflatable membrane structure has been widely used in the fields of civil building, industrial building, airship, super pressure balloon and spacecraft. It is important to measure the stress distribution of the inflatable membrane structure because it influences the safety of the structural design. This paper presents an innovative methodology for the measurement and determination of the stress distribution of the inflatable membrane structure under different internal pressures, combining photogrammetry and the force-finding method. The shape of the inflatable membrane structure is maintained by the use of pressurized air, and the internal pressure is controlled and measured by means of an automatic pressure control system. The 3D coordinates of the marking points pasted on the membrane surface are acquired by three photographs captured from three cameras based on photogrammetry. After digitizing the markings on the photographs, the 3D curved surfaces are rebuilt. The continuous membrane surfaces are discretized into quadrilateral mesh and simulated by membrane links to calculate the stress distributions using the force-finding method. The internal pressure is simplified to the external node forces in the normal direction according to the contributory area of the node. Once the geometry x, the external force r and the topology C are obtained, the unknown force densities q in each link can be determined. Therefore, the stress distributions of the inflatable membrane structure can be calculated, combining the linear adjustment theory and the force density method based on the force equilibrium of inflated internal pressure and membrane internal force without considering the mechanical properties of the constitutive material. As the use of the inflatable membrane structure is attractive in the field of civil building, an ethylene-tetrafluoroethylene (ETFE) cushion is used with the measurement model to validate the proposed methodology. The comparisons between the obtained results and numerical simulation for the inflation process of the ETFE cushion are performed, and the strong agreements demonstrate that the proposed methodology is feasible and accurate.

Theoretical Analysis and Experimental Study of an Air Inflated Membrane Structure

Feasibility Study for the Application of Air Inflated Membrane Structure in China National Stadium

Gymnasium Membrane Structures for New Campus of Zhejiang University

Structural Design Of A Practical Suspendome

ETFE Air Cushion Membrane Configurations,Structural Performances and Material Properties Experiments

Structural design on steel roof of the stadium in Nantai Lake Olympic Wetland Park

The design and analysis of tensile membrane structure--The sports facility roof of a commercial center

Drape and Inflatable Mechanics of Membrane Inflatable Structure

Study on wind-induced dynamic responses and wind tunnel test for a large-span double-layered roof structure

Wind Tunnel Experiment and Numerical Simulation of Wind Pressure Distribution of Large-Span Membrane Structure

Deployment simulation analysis of inflatable membrane structures

Deployment Simulation of Inflatable Structures Based on Improved Spring-mass System

A Spring-Mass System Based Approach for Deployment Analysis of Inflatable Membrane Structures

Structural design of the suspen-dome for the Gymnasium of Ji Nan Olympic Sports Center

Characteristic of Wind Load and Static Wind Effects Analysis of Membrane Structure Canopy Roof of Large-Scale Stadium

Experimental and simulation analysis of the initial shape of a large-span air-supported membrane structure

Dynamic Deflation Assessment of an Air Inflated Membrane Structure

Test Study and Numerical Simulation of Deflation Process of an Air-Supported Membrane Structure

An Automatic System for Pressure Control and Load Simulation of Inflatable Membrane Structure

Deflation Behavior and Related Safety Assessment of an Air-Supported Membrane Structure

An Innovative Methodology for Measurement of Stress Distribution of Inflatable Membrane Structures