Abstract:In recent years, global warming and climate change caused by the greenhouse gas emissions has given rise to widespread concerns. CO2 has been considered as the principal greenhouse gas of interest, and fossil-fuel-fired power plants have been deemed as the largest stationary sources of CO2 emission. It is imperative to capture CO2 from these sources to reduce the global CO2 emissions. Lately, capturing CO2 from flue gas using solid absorbents shows promising for CO2 abatement. For the cost-effective CO2 capture process and the recycling of environmental pollutants, deprecated resources have been utilized for CO2 capture from flue gas. In this work, fly ashes derived from different raw materials were tried as solid CO2 sorbents for flue gas treatment. To improve their CO2 capture capacities, the ashes were modified by different polyamines. An experimental demonstration on CO2 capture behaviors of fresh ashes and modified sorbents in simulated flue gas atmosphere of 40°C, 15% CO2 + 15% H2O and balanced N2 was presented in detail with a fixed-bed reactor system. CO2 capture capacities of fresh ashes were calculated as 0.56 mmolCO2/g, 0.32 mmolCO2/g, 0.44 mmolCO2/g and 0.83 mmolCO2/g, respectively. By contrast, CO2 capture capacities of amine-modified samples had been enhanced as 0.38 mmolCO2/g, 0.65 mmolCO2/g, 1.07 mmolCO2/g, 0.85 mmolCO2/g and 1.17 mmolCO2/g. The optimal sample of TEPA-modified biomass ash (TEPA-BA) with CO2 capture capacity of 1.17mmolCO2/g was screened. The optimal candidate was then selected for further investigation of the effects of temperature, CO2 concentration and H2O concentration on its CO2 capture behaviors. The results indicated that CO2 capture capacity would increase with the increase of temperature in the range of 30 to 40 °C and decrease with the increase of temperature in the range of 40 to 60°C, increase with the increase of CO2 concentration in the range of 5% to 20%, increase with the increase of H2O concentration in the range of 0% to 15% and decrease with the increase of H2O concentration in the range of 15% to 20%. The results in this work could provide basic data as a guidance for further applying the sorbents in practical operations.

Continuous CO2 capture and MSWI fly ash stabilization, utilizing novel dynamic equipment

Utilization of Cow Bone Waste and Calcium Oxide for the Solidification and Stabilization of MSWI Fly Ash: Towards Sustainable Practices

Pb stabilization in fresh fly ash from municipal solid waste incinerator using accelerated carbonation technology

[Investigation of the Sequestration of CO2 and Carbonation Process for the Stabilization of MSW Fly Ash].

CO2 capture enhancement by metal oxides impregnated coal fly ash: a breakthrough adsorption study

Heavy Metal Solidification and CO2 Sequestration from MSWI Fly Ash by Calcium Carbonate Oligomer Regulation

Green Synthesis of Nanosilica from Coal Fly Ash and Its Stabilizing Effect on CaO Sorbents for CO 2 Capture.

Diisobutylamine Mediated CO2 Mineralization and CaCO3 Production from Municipal Solid Waste Incineration Fly Ash As Raw Ingredient and Regeneration Reagent

Investigation of Accelerated and Natural Carbonation of MSWI Fly Ash with a High Content of Ca

A Study on the Mechanisms of Coal Fly Ash to Improve the CO2 Capture Efficiency of Calcium-Based Adsorbents

Study on the Accelerated Carbonation of MSWI Fly Ash under Ultrasonic Excitation: CO2 Capture, Heavy Metals Solidification, Mechanism and Geochemical Modelling

Supercritical CO2 coupled with mechanical force to enhance carbonation of fly ash and heavy metal solidification

Immobilization Potential of Cr Through Ultrasonic-assisted Water Washing in MSWI Fly Ash and Evaluation of Carbon Capture and Product Reuse in Its Washing Liquid

CO2 capture and utilization through isothermal carbonation-calcination looping integrated with MSW pyrolysis volatile reforming

Assessing the Chemical Behavior of Metals in Municipal Solid Waste Incineration Fly Ash Using an Enhanced CO2 Absorption

Accelerated Carbonation of High Ca Content Municipal Solid Waste Incineration Fly Ash and Impact on Leaching of Heavy Metal

Increased Sustainability of Carbon Dioxide Mineral Sequestration by a Technology Involving Fly Ash Stabilization

A Novel Method for MSWI Fly Ash Resource Based on Calcium Component Regulation and CO2 Mineralization

Highly efficient carbonation and dechlorination using flue gas micro-nano bubble for municipal solid waste incineration fly ash pretreatment and its applicability to sulfoaluminate cementitious materials

Studies on Several Fly Ashes and Their Modified Materials for CO2 Capture

[Research Progress on CO2 Capture, Utilization, and Storage of Fly Ash].