Abstract:Purpose - The purpose of this paper is to design a reasonable joining path and achieve assembly automation for multiple arc-shaped panels. A fuselage panel is primarily composed of skins, stringers, frames and clips. Both inserted and nested structures are adopted in the panels to improve the strength and hermeticity of the fuselage. Due to the complex structures and relationships, it is a challenge to coordinate the arc-shaped panels in the assembly process.Design/methodology/approach - A motion sequence model which achieves arc approximation based on the relative motion of multiple panels is established. The initial position of the panels is obtained by decomposing the computer-aided design model of the panels. Two translation rules, i.e. progressively decreasing translation and limited deformation translation, are applied to determine the moving path of the panels. If a panel is not at its path node, a search algorithm is used to find the nearest path node. Finally, the key algorithms are implemented in an integration system to promote joining automation of multiple panels.Findings - The zigzag path is effective for the joining of multiple panels with complex mating relationships. The automation of the join-separate-rejoin operations is time-saving and safety-assuring. The proposed method is demonstrated in practical engineering and a good efficiency is obtained.Practical implications - This method has been used in a middle fuselage assembly project. The practical results show that the zigzag path is convenient to be stored and reused, and the synchronous movements of multiple curved panels are precisely realized. Additionally, the posture accuracy of panels is significantly improved, and the operating time is reduced considerably.Originality/value - This paper gives a solution including path planning and process integration to solve the joining problem of multiple panels. The research will promote the automation of fuselage assembly.

Research on joining methods for roof to body-side assembly

A Zigzag Path Based Joining Method for Fuselage Panels in Digital Assembly

Comparison of Joinery Methods on the Strength of Joining Aluminum Alloy and Steel Parts in a Vehicle

Automotive Body Joining and Assembly: Introduction

Hybrid Joining of a Modular Multi-Material Body-in-white Structure

Study on Influence of Replacing Steel with Aluminum on Mechanical Performance of Joints of Three Stack-up Sheets

Research on joint strength and energy absorption of CFRP and Al sheets bonded-FDS hybrid joining

Analysis of Automobile Body Structure and Monocoque Body Welding Technology

Research on the Deformation Behaviors of the Clinch Joining of Aluminum Alloy and Quiet Steel Sheets

Joining performance and thermal mechanism of stainless steel/GFRP bonding joints via single-side resistance spot welding process

Study on the Flat-reshaping Technology with No Rivet for Joining Aluminium Alloy Sheet of the Automobile

Effect of Weld Parameters on Weld Quality in Sheet to Tube Joining with Simulation and Experimental Research

Method for repairing of adhesive-bonded steel

Joining processes of CFRP‐Al sheets in automobile lightweighting technologies: A review

Research Progress in Joining of Carbon Fiber-Reinforced Polymer Composites and Aluminum/magnesium Alloys

Research advances in fatigue performance of spot joining technology for lightweight materials

Research on the joining of aluminum alloy and high-strength steel by dieless clinched-adhesive processes

A flexible fixture design method research for similar automotive body parts of different automobiles

Research on laser welding of vehicle body

Research of Virtual Prototyping for Auto-Body Sheet Metal Assembly

Application of laser welding technology for automobile body manufacturing and design of laser welding cell