Abstract:Graphitic carbon nitride （GCN） was deposited on alumina hollow fibers by chemical vapor deposition for modification,and ZIF-8 membranes were prepared by in-situ crystallization on the modified supports.The effects of GCN loading temperature,loading amount,precursor type and the amount of sodium formate in the synthesis solution were investigated by X-ray diffraction （XRD）,Fourier infrared spectroscopy （FTIR）,scanning electron microscopy （SEM） and gas permeation tests.It was found that the suitable temperature for loading GCN onto the alumina support surface was 350℃.The higher the temperature,the higher the C/N ratio of GCN on the support surface and the fewer N sites,which was less favorable for the in-situ crystallization of ZIF-8 membranes.At the same loading temperature,the longer the loading time,the higher the coverage （loading amount） of GCN on the alumina support.If the loading amount was too small,a dense membrane cannot be formed.Compared with melamine,using urea as the precursor for chemical vapor deposition,the loading amount decreased significantly under the same loading conditions,and finally a dense membrane could not be formed.The content of sodium formate in the synthesis solution was regulated and controlled,and the optimized formula of the synthesis solution was that the molar ratio of Zn Cl 2 ,Hmim （2-methylimidazole）,HCOONa and CH 3 OH was 1:1.5:2.0:250.The obtained ZIF-8 membrane showed the H 2 permeance of 6.11×10 -7 mol/（Pa·s·m~2）,and the ideal separation selectivity of H 2 /N 2 was 5.1.

Ultrathin Carbon Nanotube–dna Hybrid Membrane Formation by Simple Physical Adsorption Onto a Thin Alumina Substrate

Carbon Nanotube DNA Sensor and Sensing Mechanism.

Atomically thin molybdenum disulfide nanopores with high sensitivity for DNA translocation.

Individual Alumina Nanotubes Coaxially Wrapping Carbon Nanotubes and Nanowires

Ultrashort single-walled carbon nanotubes in a lipid bilayer as a new nanopore sensor

Ultrathin Single–Layered Membranes from Double–Walled Carbon Nanotubes

Carbonization of Disclike Molecules in Porous Alumina Membranes: Toward Carbon Nanotubes with Controlled Graphene‐Layer Orientation

Alumina nanotubes and nanowires from Al-based porous alumina membranes

Direct Synthesis of Mesoporous Carbon Microwires and Nanowires

A Simple Method for Synthesizing Copper Nanotube Arrays

Modification of Alumina Hollow Fibers and In-Situ Synthesis of ZIF-8 Membranes

Formation mechanism of individual alumina nanotubes wrapping metal (Cu and Fe) nanowires

Freestanding Macroscopic Metal-Oxide Nanotube Films Derived from Carbon Nanotube Film Templates

Fabrication of Nanoporous Alumina Ultrafiltration Membrane with Tunable Pore Size Using Block Copolymer Templates

Alumina Nanowire Arrays Standing on a Porous Anodic Alumina Membrane

DNA biosensors based on self-assembled carbon nanotubes

Synthesis and Characterisation of Ordered Arrays of Mesoporous Carbon Nanofibres

Fabrication, Self-Assembly, and Properties of Ultrathin Aln/Gan Porous Crystalline Nanomembranes: Tubes, Spirals, and Curved Sheets

Fabrication of Alumina Nanowires via Anodic Oxidation of Aluminum

Ultra-Thin, High-Lifetime Silicon Nitride Membranes for Nanopore Sensing

Asymmetric alumina-based ultrathin composite ceramic membranes with interfacial modification of black talc nanosheets