Abstract:To evaluate the performance of optical low pass filter (OLPF) accurately, a new 2D digital imaging system model including an OLPF was created for the first time using the modular transfer function (MTF). An evaluation function was also established based on this model. To manifest the model and its evaluation, three typical OLPFs were studied. The results show that the Delta value of each filter undergoes a slow and slight decrease and then rapidly increases when the ideal optical system cutoff frequency is increased. The optieal system embedded with the 2-chip-4-point type OLPF created a better image than those with the other two OLPF's when the F number is greater than 4.4; whereas the OLPF of 3-chip-8-point type worked best when the F number is lower than 4.4. When the F number of the optical system is 2.8, namely, with a spatial cutoff frequency of 649 lp/mm, the filter of 3-chip-8-point type performs better than that of the 2-chip-4-point and 3-chip-4-point types. The Delta value of the first filter is 28.3% and 37.5%, lower than that of the other two filters, respeatively. That is, the filter performance is 28.3% and 37.5% higher. Finally, spatial frequency test shows that the moire fringe and false colors can be seen in the last two pictures, while in the first, these effects are well eliminated. The theoretical calculations agree with the experimental results.

Performance Analysis of A New Structure for Digital Filter Implementation

A Schur-form Based Efficient Structure for Finite Precision Implementation of Digital Filters

A Matrix Factorization-Based Structure for Digital Filters

Steady-state performance analysis for adaptive filters with error nonlinearities

Robust State-Space Realizations of Discrete-Time Systems Against Finite Word Length Errors

Multilayered Analog Optical Differentiating Device: Performance Analysis on Structural Parameters

Analysis of structure design of optical low pass filter

Optimal Algorithm for FIR Digital Filter with Canonical Signed Digit Coefficients

On normal realizations of discrete-time systems with consideration of finite precision implementation

Study Of Modular Transfer Function-Based Optieal Low-Pass Filter Evaluation Model And Experiment

On normal realizations of digital filters with minimum roundoff noise gain

An L(1)-Based Approach of Designing Optimal Structures of Finite Precision Digital Controller

Modeling and Analyzing High-Order Modes in Periodic-Stub-Loaded Stripline for Wideband Filter Design

An approach to performance equivalent simplification of sequent and parallel structures of DSPN

Exploiting Redundancy in Direct Synthesis for Inline Filters

Analysis of Digital Filter Prototype Design Methods for High-Speed Signal Processing Based on Polyphase Filter Bank

Optimal Design of Multiplierless FIR Filter

Low-cost Parallel Fir Digital Filter Structures Utilizing the Coefficient Symmetry

Low Power Design For Fir Filter

Optimal Controller And Filter Realizations Using Finite-Precision, Floating-Point Arithmetic

Bilinear Double-Order Filter Designs and Application Examples