[The Research Progress on Microelectrode Array (MEA) of Retinal Prosthesis].

Tianao Li,Zheng Cao,Xiaohong Sui,Xia Jiang,Qiushi Ren,Xinyu Chai

DOI: https://doi.org/10.3969/j.isnn.1671-7104.2010.05.011

2010-01-01

Abstract:This review paper presents the current research progress, challenges and future development on microelectrode array of retinal prosthesis, including epi-retinal and sub-retinal implants.

What problem does this paper attempt to address?

Microelectrodes for Visual Prosthesis

SHAO Yi-bin,SUI Xiao-hong,REN Qiu-shi

DOI: https://doi.org/10.3321/j.issn:1006-2467.2009.07.006

2009-01-01

Abstract:As the interface between visual nervous system and external electrical system,the microelectrode array(MEA) is the key component in visual prostheses.According to different implanted locations along visual pathways(i.e.retina,optic nerve,visual cortex,suprachoroid and optic-nerve head),various kinds of MEAs home and abroad were reviewed and compared.The key points and current challenges for the design and fabrication of MEAs for visual prostheses were discussed further.This paper work will promote the implantable MEAs for clinical experiment.
[The research on multi-layer flexible microelectrode arrays of epiretinal prosthesis].

Zheng Cao,Tianao Li,Xiaohong Sui,Gang Li,Qiushi Ren,Xinyu Chai

2010-01-01

Abstract:This paper proposed a new design on multi-layer flexible microelectrode arrays (MEA) of epiretinal prosthesis, as well as a set of automatic testing system to evaluate and analyze the MEA. Experiment results showed that the MEA was satisfying on both flexibility and impedance and the multi-layer design didn't introduce significant differences.
Development Of Flexible Neural Microelectode Arrays Based On Parylene For Retinal Prosthesis

Yumei Xing,Chun Hui,Yibo Wu,Ailan Xu,Gang Li,Jianlong Zha,Qiushi Ren

DOI: https://doi.org/10.1109/ICNSC.2008.4525278

2008-01-01

Abstract:Microelectrode arrays (MEAs) have become key components in retinal implants for recording of neural signals or electrical stimulation of nerves. In this paper, implantable flexible MEAs based on a novel polymer, parylene, were developed by designing MEMS process. And electrical performance of prepared microelectrodes was characterized electrochemically. Results showed that impedance and phase delay of testing MEAs were 2000 Omega similar to 100 Omega and -20 degrees from 10(3)Hz to 10(5) Hz, respectively, which would supply a better application with neural interface for retinal prosthesis.
Flexible Microelectrode Array on Parylene for Subretinal Stimulation and Its Biocompatibility Test

Xianju Huang,Weihong Yu,Wei Wang,Chan Zhao,Chengchen Gao,Xuqian Wang,Zhikun Yang,Zhihong Li,Fangtian Dong

DOI: https://doi.org/10.4028/www.scientific.net/amr.60-61.425

2009-01-01

Abstract:Parylene C, an emerging material in microelectromechanical systems (MEMS), is now widely applied to neural prosthesis devices, such as artificial retinal implants, due to its well-known biocompatibility and ability to be easily patterned by oxygen plasma etching. This work presents a flexible parylene-based microelectrode array( MEA) using MEMS techniques aiming for the chronic subretinal stimulation. The MEA was successfully manufactured and inserted into the subretinal space of a rabbit eye by a novel surgical operation. Optical Coherence Tomography(OCT) showed that a chronic implantation of parylene-based electrode arrays in the rabbit retina over a three month follow-up period demonstrated that the present chip system has a good biocompatibility with the subretinal organs,without obvious damages.
Fabrication and Characterization of a Parylene-Based Three-Dimensional Microelectrode Array for Use in Retinal Prosthesis

Renxin Wang,Xianju Huang,Guangfeng Liu,Wei Wang,Fangtian Dong,Zhihong Li

DOI: https://doi.org/10.1109/JMEMS.2009.2039773

2010-01-01

Abstract:A novel Parylene-based shape-transferring technique was developed to fabricate 3-D microelectrodes, which fulfilled the requirements of the high-density microelectrode array (MEA) used in retinal prosthesis. A process combining anisotropic and isotropic etching was utilized to form the 3-D silicon-tip array whose shape was transferred to the Parylene C film as a flexible and biocompatible substrate. Platinum was chosen as the electrode material owing to its high charge delivery capacity and chemical inertness in the physiological environment. An aluminum-photoresist dual-layer lift-off process was employed for platinum patterning on the substrate with high tips. To avoid the cracking problem existing in the platinum-Parylene C structure, a gold intermediate layer was introduced to retard the tendency. To test the superiority of the present 3-D flexible MEA compared with the planar one, electrical properties of MEAs were characterized both in vitro and in vivo. The experimental results showed that the impedance of the 3-D electrode was about 72.7% of the planar one at 1 kHz with the same footprint in vitro, and 71.5% in vivo. The preliminary surgical experiment validated the feasibility of the 3-D MEA in retinal prosthesis.
The Application of Flexible Neural Microelectrode on Retinal Prosthesis

Chun Hui,Bo Li,Ailan Xu,Yumei Xing,Gang Li,Jianlong Zhao,Qiushi Ren

DOI: https://doi.org/10.3321/j.issn:1001-5515.2008.04.042

2008-01-01

Abstract:The latest development and the merit of using flexible neural microelectrodes are mainly reported in the paper, in which the properties of based-material, the micro-structure of neural microelectrodes and the method about how to test the microelectrodes are also included.
Electrical Characterization of Flexible Neural Microelectrode Array for Retinal Prosthesis

Wu Yibo,Xu Ailan,Hui Chun,Ren Qiushi,Li Gang

DOI: https://doi.org/10.19650/j.cnki.cjsi.2008.12.012

2008-01-01

Abstract:Substrate-integrated microelectrode arrays have become one of the hottest topics in the world, which are used in implantable prosthesis for recording of neural signals or electrical stimulation of nerves. A new type of flexible microelectrode arrays based on parylene is developed in this paper. And the electrical performance of the flexible neural MEAs is characterized using electrochemical methods. Test results suggest that the impedance value of the parylene-based MEAs is in the range of 2000-100Ω, and its phase angle is -20° in medium frequency band. With these electrical performances, functional electrical stimulation can be realized easily for implantable system.
Evaluation of a MEMS-Based Dual Metal-Layer Thin-Film Microelectrode Array for Suprachoroidal Electrical Stimulation

Xiaohong Sui,Jingjing Sun,Liming Li,Chuanqing Zhou,Xuejiao Luo,Niansheng Xia,Yan,Yao Chen,Qiushi Ren,Xinyu Chai

DOI: https://doi.org/10.1109/tnsre.2012.2188042

IF: 4.9

2012-01-01

IEEE Transactions on Neural Systems and Rehabilitation Engineering

Abstract:A double metal-layer thin-film platinum microelectrode array was fabricated for implantation between sclera and choroid based on MEMS processing techniques and photosensitive polyimide material. The array was composed of 60 stimulating sites (6 × 10) and four selectable returning electrodes. The diameter of each stimulating electrode was 350 μm with a center-to-center spacing of 750 μm. The transient voltage responses of the electrode to current pulse stimulation indicated a charge-injection capacity greater than 52.1 μC/cm2. Acute in vivo animal experiments showed that the implicit time of electrically evoked potentials (EEPs) was 17.09 ± 1.45 ms at a threshold current of 25.55 ± 5.43 μA for a full-row of simultaneously stimulated electrodes (i.e. current applied simultaneously to each of the 10 electrodes). Individual electrode stimulation threshold was 48.57 ± 6.90 μA. The corresponding threshold charge densities were 13.28 ± 2.82 μC/cm2 and 25.24 ± 3.59 μC/cm2, respectively. The spatial spread of the maximally recorded P1 response in the EEPs indicated a correspondence between the retinal stimulation site and the focal response location in the cortex. This method of array fabrication is suitable for acute suprachoroidal stimulation, and has a potential use for the fabrication of a visual prosthesis.
Trends and recent development of the microelectrode arrays (MEAs)

Longqian Xu,Chenxuan Hu,Qi Huang,Kai Jin,Ping Zhao,Dongping Wang,Wei Hou,Lihua Dong,Siyi Hu,Hanbin Ma

DOI: https://doi.org/10.1016/j.bios.2020.112854

IF: 12.545

2021-03-01

Biosensors and Bioelectronics

Abstract:<p>In this paper, we reviewed the history of microelectrode arrays (MEAs), compared different microfabrication techniques applied to modern MEAs in terms of their material characters, device properties and application scenarios. Then we discussed the biocompatibility of different MEAs as well as corresponding strategy of improvement. At last, we analyzed the growing trend of MEAs' technical route, expected application of MEAs in the field of Electrical impedance tomography (EIT).</p>

biotechnology & applied microbiology,biophysics,chemistry, analytical,electrochemistry,nanoscience & nanotechnology
Study of Polyimide-Based Bio-Electrode Array for Retinal Prostheses

LIU Shu-wei,CHEN Di,CHAI Xin-yu,LIU Jing-quan,CHEN Xiang,ZHU Jun,REN Qiu-shi

DOI: https://doi.org/10.3969/j.issn.1004-1699.2008.04.003

2008-01-01

Abstract:The feasibility of an implantable retinal prosthesis that would partially restore vision by direct electrical stimulation of retinal neurons has been proved by studies.We have fabricated the stimulating bio-electrode array on the flexible substrate by micro electro mechanical system(MEMS)techniques.The stimulating electrodes are 100 μm in diameter,packaged by polyimide which is a good water barrier.The impedance of single electrode is 104 to 106 Ohm in the range of frequencies from 10 to 5 000 Hz.
Characterization of A Light Switchable Microelectrode Array for Retinal Prosthesis

Xinyi Zhang,Tao Xiong,Pei-Yu Chiou,Zhihong Li

DOI: https://doi.org/10.1063/1.3670299

IF: 4

2011-01-01

Applied Physics Letters

Abstract:A light switchable microelectrode array for retinal prosthesis, which is performed with the photosensitive conductivity of hydrogenated amorphous silicon (a-Si:H) and of more advantages over the two major current retinal prosthetic categories, is characterized. Sensitivity to different visible wavelengths and light intensities are verified as well. Preliminary impedance test invitro shows appropriate impedance for neuron stimulation applications. It is indicated that such device provides a promising potential to restore a certain degree of visual function.
Development of in vitro 2D and 3D microelectrode arrays and their role in advancing biomedical research

Charles M Didier,Avra Kundu,David DeRoo,Swaminathan Rajaraman

DOI: https://doi.org/10.1088/1361-6439/ab8e91

2020-07-21

Journal of Micromechanics and Microengineering

Abstract:The development of microelectrode arrays (MEAs) along with complementary advances in electronics, mechanics and software to connect with these arrays has led to the in vitro interfacing and benchtop electrophysiological models of several electrically active cells such as neurons and cardiomyocytes proving vital models and testing of human disease conditions in a dish/on a chip. This topical review deals with the micro/nanofabrication technology development of Microelectrodes Arrays from early silicon based developments to today's additive manufacturing technologies that have been employed to address bio-micro-electro-mechanical systems tool development in this space. Specifically 2D and 3D MEAs technologies have been reviewed in this paper along with a broad overview of some of the biological applications using these devices that are advancing the very state of biomedical research.

engineering, electrical & electronic,nanoscience & nanotechnology,instruments & instrumentation,physics, applied
Retinal Prostheses: Engineering and Clinical Perspectives for Vision Restoration

Kevin Y. Wu,Mina Mina,Jean-Yves Sahyoun,Ananda Kalevar,Simon D. Tran

DOI: https://doi.org/10.3390/s23135782

IF: 3.9

2023-06-22

Sensors

Abstract:A retinal prosthesis, also known as a bionic eye, is a device that can be implanted to partially restore vision in patients with retinal diseases that have resulted in the loss of photoreceptors (e.g., age-related macular degeneration and retinitis pigmentosa). Recently, there have been major breakthroughs in retinal prosthesis technology, with the creation of numerous types of implants, including epiretinal, subretinal, and suprachoroidal sensors. These devices can stimulate the remaining cells in the retina with electric signals to create a visual sensation. A literature review of the pre-clinical and clinical studies published between 2017 and 2023 is conducted. This narrative review delves into the retinal anatomy, physiology, pathology, and principles underlying electronic retinal prostheses. Engineering aspects are explored, including electrode–retina alignment, electrode size and material, charge density, resolution limits, spatial selectivity, and bidirectional closed-loop systems. This article also discusses clinical aspects, focusing on safety, adverse events, visual function, outcomes, and the importance of rehabilitation programs. Moreover, there is ongoing debate over whether implantable retinal devices still offer a promising approach for the treatment of retinal diseases, considering the recent emergence of cell-based and gene-based therapies as well as optogenetics. This review compares retinal prostheses with these alternative therapies, providing a balanced perspective on their advantages and limitations. The recent advancements in retinal prosthesis technology are also outlined, emphasizing progress in engineering and the outlook of retinal prostheses. While acknowledging the challenges and complexities of the technology, this article highlights the significant potential of retinal prostheses for vision restoration in individuals with retinal diseases and calls for continued research and development to refine and enhance their performance, ultimately improving patient outcomes and quality of life.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
Design, Fabrication, and Implantation of Invasive Microelectrode Arrays as in vivo Brain Machine Interfaces: A Comprehensive Review

Dongyang Yi,Yao Yao,Yi Wang,Lei Chen

DOI: https://doi.org/10.1016/j.jmapro.2024.07.100

2024-09-30

Abstract:Invasive Microelectrode Arrays (MEAs) have been a significant and useful tool for us to gain a fundamental understanding of how the brain works through high spatiotemporal resolution neuron-level recordings and/or stimulations. Through decades of research, various types of microwire, silicon, and flexible substrate-based MEAs have been developed using the evolving new materials, novel design concepts, and cutting-edge advanced manufacturing capabilities. Surgical implantation of the latest minimal damaging flexible MEAs through the hard-to-penetrate brain membranes introduces new challenges and thus the development of implantation strategies and instruments for the latest MEAs. In this paper, studies on the design considerations and enabling manufacturing processes of various invasive MEAs as in vivo brain-machine interfaces have been reviewed to facilitate the development as well as the state-of-art of such brain-machine interfaces from an engineering perspective. The challenges and solution strategies developed for surgically implanting such interfaces into the brain have also been evaluated and summarized. Finally, the research gaps have been identified in the design, manufacturing, and implantation perspectives, and future research prospects in invasive MEA development have been proposed.
Monitoring Cortical Response and Electrode-Retina Impedance Under Epiretinal Stimulation in Rats

Hui Xie,Yi Wang,Zixin Ye,Shiyi Fang,Zhen Xu,Tianzhun Wu,Leanne Lai Hang Chan

DOI: https://doi.org/10.1109/tnsre.2021.3090904

IF: 4.9

2021-01-01

IEEE Transactions on Neural Systems and Rehabilitation Engineering

Abstract:Retinal prosthesis can restore partial vision in patients with retinal degenerative diseases such as retinitis pigmentosa and age-related macular degeneration. Epiretinal prosthesis is one of three therapeutic approaches, which received regulatory approval several years ago. The thresholds of an epiretinal stimulation is partly determined by the size of the physical gap between the electrode and the retina after implantation. Precise positioning of epiretinal stimulating electrode array is still a challenging task. In this study, we demonstrate an approach to positioning epiretinal prostheses for an optimal response at the cortical output by monitoring both the impedance at the electrode-retina interface and the evoked-potential at the cortical level. We implanted a single-channel electrode on the epiretinal surface in adult rats, acutely, guided by both the impedance at the electrode-retina interface and by electrically evoked potentials (EEPs) in the visual cortex during retinal stimulation. We observe that impedance monotonously increases with decreasing electrode-retina distance, but that the strongest cortical responses were achieved at intermediate impedance levels. When the electrode penetrates the retina, the impedance keeps increasing. The effect of stimulation on the retina changes from epiretinal paradigm to intra-retinal paradigm and a decrease in cortical activation is observed. It is found that high impedance is not always favorable to elicit best cortical responses. Histopathological results showed that the electrode was placed at the intra-retinal space at high impedance value. These results show that monitoring impedance at the electrode-retina interface is necessary but not sufficient in obtaining strong evoked-potentials at the cortical level. Monitoring the cortical EEPs together with the impedance can improve the safety of implantation as well as efficacy of stimulation in the next generation of retinal implants.

engineering, biomedical,rehabilitation
C-Sight Visual Prostheses For The Blind - Optic Nerve Stimulation With Penetrating Electrode Array

Xinyu Chai,Liming Li,Kaijie Wu,Chuanqing Zhou,Pengjia Cao,Qiushi Ren

DOI: https://doi.org/10.1109/MEMB.2008.923959

2008-01-01

IEEE Engineering in Medicine and Biology Magazine

Abstract:Visual prostheses based on a stimulating microelectrode array to restore vision offer a promising approach for the blind and has become a rapidly growing scientific field in neurorehabilitation engineering. A number of research groups from major developed countries lead the research activities in this field. The goal of the C-Sight Project is to develop an implantable microelectronic medical device that will restore useful vision to blind patients. Retinitis pigmentosa (RP) and age-related macular degeneration are the two leading causes for blindness, for which there have been no effective treatments, both surgically and biologically, until now.The ultimate goal of our project is to develop a completely implantable visual prosthesis based on a penetrating microelectrode array at the optical nerve; to implement this, it requires many technical advances. However, in our study, an implantable microcamera, the wearable information processor, and the multichannel neurostimulator are investigated. Electrophysiological experiments were also performed to provide evidence for the feasibility of our approach. Some related psychophysical studies including simulated phosphene positioning and recognition of pixelized images are also reported in this article.
Efficacy and Reliability of Long-Term Implantation of Multi-Channel Microelectrode Arrays in the Optical Nerve Sheath of Rabbit Eyes

Kai Wang,Xiao-Qian Li,Xiao-Xin Li,Wei-Hua Pei,Hong-Da Chen,Jian-Qiang Dong

DOI: https://doi.org/10.1016/j.visres.2011.06.019

IF: 1.8

2011-01-01

Vision Research

Abstract:In addition to epiretinal and subretinal areas, the optic nerve (ON) is also a candidate location for implanting visual prosthesis to restore vision of patients with retinitis pigmentosa (RP). Since the ON receives all the signals from the retina, stimulating the ON may potentially evoke phosphenes over a wider range of visual field. In this study, we designed a 9-channel microelectrode array and implanted it between the dura mater and pia mater of rabbit ONs by lateral orbitotomy. We recorded the current thresholds and evaluated the efficacy of the array using electrically evoked potentials (EEPs). Spatial discrimination of approximately 20° was verified by EEP maps over visual cortex. A large area of the visual field (over 130° along horizontal meridian) could be activated by this microelectrode array. Visual evoked potentials (VEPs) and different pathological examinations were used to examine potential damage of ONs. One year post implantation, we did not notice significant damages to either the ONs or the microelectrode arrays. EEPs were successfully recorded up to 6months post implantations. However, further studies are still needed to reduce fibrous encapsulation of the microelectrode array, which resulted in a gradual elevation of current thresholds to elicit EEPs.
Bionic vision: Current progress and future chanllege

Qiushi Ren,Kaijie Wu,Xiaohong Sui,Liming Li,Xinyu Chai

DOI: https://doi.org/10.1364/aoe.2008.sun2

2009-01-01

Abstract:Electrical stimulation of optic nerve with penetrating electrode array for visual prosthesis has been proposed by C-Sight. Some aspects of current progress are introduced, including penetrating microelectrode array, neural electrical stimulator, and in-vivo electrophysiological study.
Double‐Sided, Thin‐Film Microelectrode Array with Hemispheric Electrodes for Subretinal Stimulation

Namju Kim,Yeji Hong,Seongkwang Cha,Yoo Na Kang,Hee Won Seo,Hyunmin Moon,Jungryul Ahn,Aseer Intisar,Minseok S. Kim,Seong‐Woo Kim,Yong Sook Goo,Sohee Kim

DOI: https://doi.org/10.1002/admt.202302155

IF: 6.8

2024-03-26

Advanced Materials Technologies

Abstract:A double‐sided microelectrode array based on parylene C film with a tailorable electrode shape is introduced for subretinal stimulation. The double‐sided array has electrodes on one side and bonding pads on the other side, minimizing the interconnections between them. Low‐temperature bonding of the double‐sided array with the stimulator results in a compact implant and enables fast prototyping of the electrode array. Components in neural implants, such as the electrode array and stimulator circuit, are often fabricated discretely. This modular fabrication scheme offers flexibility during development but poses difficulties during assembly, as components must be compactly integrated for implantation. It is particularly difficult in cases where the electrode array is required to have a high number of channels, such as in retinal prostheses. This paper presents the development of a parylene C‐based, double‐sided microelectrode array with 294 hemispheric electrodes for subretinal stimulation. The bonding pads on the bottom side of the double‐sided array are connected with electrodes through vias, eliminating the interconnection lines. The array can be integrated with a stimulator circuit through pad‐to‐pad bonding, resulting in a compact implant. The hemispheric electrodes are fabricated using thermally reflowed photoresist infillings, through which the height and width of the hemispheres can be easily controlled. The long‐term stability and biocompatibility of the materials and methods used to fabricate and package the electrodes are demonstrated in in vitro and in vivo environments over months. Finally, subretinal stimulation by the developed electrodes is successfully demonstrated using in vitro retinal patches from mice and monkeys.

materials science, multidisciplinary
In vitro and in vivo evaluation of a photosensitive polyimide thin-film microelectrode array suitable for epiretinal stimulation

Xia Jiang,Xiaohong Sui,Yiliang Lu,Yan Yan,Chuanqing Zhou,Liming Li,Qiushi Ren,Xinyu Chai

DOI: https://doi.org/10.1186/1743-0003-10-48

2013-01-01

Journal of NeuroEngineering and Rehabilitation

Abstract:Background Epiretinal implants based on microelectro-mechanical system (MEMS) technology with a polyimide (PI) material are being proposed for application. Many kinds of non-photosensitive PIs have good biocompatibility and stability as typical MEMS materials for implantable electrodes. However, the effects of MEMS microfabrication, sterilization and implantation using a photosensitive polyimide (PSPI) microelectrode array for epiretinal electrical stimulation has not been extensively examined. Methods A novel PSPI (Durimide 7510) microelectrode array for epiretinal electrical stimulation was designed, fabricated based on MEMS processing and microfabrication techniques. The biocompatibility of our new microelectrode was tested in vitro using an MTT assay and direct contact tests between the microelectrode surface and cells. Electrochemical impedance characteristics were tested based on a three-electrode testing method. The reliability and stability was evaluated by a chronic implantation of a non-functional array within the rabbit eye. Histological examination and SEM were performed to monitor possible damage of the retina and microelectrodes. Electrically evoked potentials (EEPs) were recorded during the acute stimulation of the retina. Results The substrate was made of PSPI and the electrode material was platinum (Pt). The PSPI microelectrode array showed good biocompatibility and appropriate impedance characteristics for epiretinal stimulation. After a 6-month epiretinal implantation in the eyes of rabbits, we found no local retinal toxicity and no mechanical compression caused by the array. The Pt electrodes adhesion to the PSPI remained stable. A response to electrical stimuli was with recording electrodes lying on the visual cortex. Conclusion We provide a relevant design and fundamental characteristics of a PSPI microelectrode array. Strong evidences on testing indicate that implantation is safe in terms of mechanical pressure and biocompatibility of PSPI microelectrode arrays on the retina. The dual-layer process we used proffers considerable advantages over the more traditional single-layer approach and can accommodate much many electrode sites. This lays the groundwork for a future, high-resolution retinal prosthesis with many more electrode sites based on the flexible PSPI thin film substrate.

[The Research Progress on Microelectrode Array (MEA) of Retinal Prosthesis].

Microelectrodes for Visual Prosthesis

[The research on multi-layer flexible microelectrode arrays of epiretinal prosthesis].

Development Of Flexible Neural Microelectode Arrays Based On Parylene For Retinal Prosthesis

Flexible Microelectrode Array on Parylene for Subretinal Stimulation and Its Biocompatibility Test

Fabrication and Characterization of a Parylene-Based Three-Dimensional Microelectrode Array for Use in Retinal Prosthesis

The Application of Flexible Neural Microelectrode on Retinal Prosthesis

Electrical Characterization of Flexible Neural Microelectrode Array for Retinal Prosthesis

Evaluation of a MEMS-Based Dual Metal-Layer Thin-Film Microelectrode Array for Suprachoroidal Electrical Stimulation

Trends and recent development of the microelectrode arrays (MEAs)

Study of Polyimide-Based Bio-Electrode Array for Retinal Prostheses

Characterization of A Light Switchable Microelectrode Array for Retinal Prosthesis

Development of in vitro 2D and 3D microelectrode arrays and their role in advancing biomedical research

Retinal Prostheses: Engineering and Clinical Perspectives for Vision Restoration

Design, Fabrication, and Implantation of Invasive Microelectrode Arrays as in vivo Brain Machine Interfaces: A Comprehensive Review

Monitoring Cortical Response and Electrode-Retina Impedance Under Epiretinal Stimulation in Rats

C-Sight Visual Prostheses For The Blind - Optic Nerve Stimulation With Penetrating Electrode Array

Efficacy and Reliability of Long-Term Implantation of Multi-Channel Microelectrode Arrays in the Optical Nerve Sheath of Rabbit Eyes

Bionic vision: Current progress and future chanllege

Double‐Sided, Thin‐Film Microelectrode Array with Hemispheric Electrodes for Subretinal Stimulation

In vitro and in vivo evaluation of a photosensitive polyimide thin-film microelectrode array suitable for epiretinal stimulation