Abstract:Atmospheric freeze-drying (AFD) is a relatively new freeze-drying technology without the need for a vacuum, making it easy to operate and cost-effective. Although there have been studies using AFD to dehydrate solid foods, there is currently no research on using AFD to dehydrate frozen liquids in pharmaceutical vials. In this study, several approaches were evaluated to enhance the atmospheric sublimation of water in pharmaceutical vials. Using −4 °C impinging jet airflow to dry frozen water samples in the vial, it was found that convective action significantly affected the sublimation rate. On this basis, a 3D-printed air-guide model was designed to improve airflow circulation in the vial, and it was found that the drying rate was highest when airflow energy loss was minimized, and airflow velocity at the sample surface was maximized. Additionally, the geometric characteristics of the vial also influenced the sublimation rate; vials with a larger bottom area and shorter height showed the highest sublimation rate. Increasing the vial's bottom radius from 11 mm to 13 mm, under atmospheric pressure and using cold air at approximately −5 °C, reduced the drying time of 1 g of frozen water from 8.5 h to 6 h; each 5 mm height increase added 0.5 h to the drying time. Using cold air at −10 °C to dry 1 g of frozen water in a 5 mL vial, the combination of ultrasonic-induced energy (at a frequency of 39.46 kHz) and the air-guide model effectively reduced the sublimation time from 7 h to 5 h, compared to using only the air-guide model. However, this technique may be vulnerable to melting at the vial-transducer contact point, should the transducer be directly attached to the vials.

Study on Vacuum Freeze-drying Technology for the Superfine RDX Powder

Preparation,Characterization and Performances of High Purity Sub-micron RDX

Study on the Application of the Vacuum Microwave Drying and Vacuum Freeze-Drying Technology in Surimi Products

Technology of Ultra-fine RDX Coating with Rapid Expansion of Supercritical Solution Method

Vacuum Freeze-Drying of Soybean Phosphatidylcholine

Experimental Study on a Vacuum Freeze-drying with Radiation System

Quality Evaluation of Panax Notoginseng Extract Dried by Different Drying Methods

Exploring the use of atmospheric freeze drying for dehydrating pharmaceutics in vials: Baseline water sublimation investigation

Preparation and Properties of RDX/Aluminum Composites by Spray-Drying Method

Optimization for Vacuum Belt Drying Process of Rehmannia Leaves Extract

Optimization of Microwave Vacuum Low-temperature Drying Process for Rehmannia Glutinosa Libosch Leaves Extract

Novel ultra-rapid freezing particle engineering process for enhancement of dissolution rates of poorly water-soluble drugs

DEHYDRATED ALFALFA MEAL IN RATIONS FOR CONFINED BROOD SOWS.

Preparation of Ultra-Fine Explosive HMX and RDX Using High-Speed Impinging Streams

Preparation Improvement of Superfine A5 Booster Explosive

Optimization of Vacuum Freeze-Drying Process and Quality Evaluation of Stropharia Rugosoannulata

Ultrafine RDX / Al Preparation and Properties of Mixed Explosives

Influence Factors of Preparation of Ultra-fine PYX by Solvent and Non-solvent Technique

Seasonal variations in onset of symptoms in Crohn's disease.

Study on Designing and Manufacturing the DS-12 Freeze - Drying System Using Infrared Radiation Heating Process

Optimization for vacuum belt drying process of Panax notoginseng extract