Abstract:The attainment and maintenance of a low temperature environment is essential for aerospace cryogenic detectors to achieve their required performance. Developing cryocoolers with features of high efficiency, compact structure, and long lifetime is the main challenge for cryogenic detector cooling. In this paper, a high efficiency thermally-coupled two-stage Stirling type pulse tube cryocooler working at 35 K for HgCdTe long wave infrared detector cooling is designed and tested. The thermally-coupled type avoids gas distribution at cold side which minimizes the inter-stage influence. The whole cryocooler is driven by one linear compressor which enables compact structure. The influence of operation frequency and mean pressure is studied by numerical calculation and experiments to determine the optimum operation condition. Acoustic impedance characteristics of both stages and the whole cold finger are also analyzed by comparing performance of cryocooler with different frequency, mean pressure and structure dimensions. The distributions of acoustic power and phase angle are presented to study the relation between impedance characteristic and the cooling performance. Impedance match between compressor and cold finger is also discussed by analyzing the efficiency of the linear compressor and the performance of cryocooler with different pulse tubes. Under optimum impedance match and operation condition of a working frequency of 39.2 Hz and a mean pressure of 2.45 MPa, the cryocooler provides a cooling power of 1 W at 35.1 K with an input electrical power of 150 W, which indicates a relative Carnot efficiency of 5%. This is a rather high efficiency for developed Stirling type multi-stage pulse tube cryocooler working at 35 K with only inertance tubes as phase shifter. The development of this cryocooler lays a solid base for the further optimization to realize a competitive candidate for aerospace cooling requirements.

Test and analysis for conductance of aerospace condenser

Development and Validation of Helical-Coil-in-fluted-tube Gas Cooler for CO2 Heat Pump Water Heaters

ANALYSIS OF TRANSIENT TEMPERATURE FIELD CHARACTERISTICS INSIDE A LARGE-SCALE THERMAL CYCLING TEST CAVITY FOR SPACECRAFT

A Two-Stage Thermally-Coupled Pulse Tube Cryocooler Working at 35 K for Space Application

Heat Transfer Performance Analysis on the CO2 Two-phase Thermosyphon Loop

Performance Contrast and Analysis of the Two-phase Cool-ing System and the Traditional Cooling System

Thermal analysis and performance investigations of shell and tube heat exchanger using numerical simulations

Experimental Study on Heat Transfer Characteristics of A Condenser in the Presence of Air

Sensitivity analysis of velocity field influence on condensers' performance and parallel circuit design based on actual air velocity distribution

Characteristics Analysis of Condensation outside Horizontal Tube Bundles and Novel Condensation Enhancement Method

Design and thermal characteristic test of a temperature control system for spacecraft precision instrument

Experimental Study on a Helium Cryogenic Closed Loop Two-Phase Thermosyphon with a Long Heat Transport Distance

Experiment and simulation analysis of air-cooled condenser and water-cooled condenser series systems

Thermal analysis and test methods for local environment temperature control in-vehicle apparatus

Design and Analysis of Cryogenic System for the Rotor of a 15 Mvar HTS Synchronous Condenser

Theoretical and Experimental Investigation on Characteristics of CO2 Mechanically Pumped Two Phase Cooling System

Analysis of the multiphase flow with condensation in the two-phase ejector condenser using CFD modeling

Condensation Characteristics of Flows in Newly Developed, Three-Dimensional Enhanced Heat Transfer Tubes

Condensation Heat Transfer Characteristics On The Outside Of Horizontal Smooth, Herringbone And Enhanced Surface 1eht Tubes

Thermodynamics Cycle Analysis and Numerical Modeling of Thermoelastic Cooling Systems

Design and Verification of Thermal Control System of Communication Satellite