Abstract:Proton exchange membrane fuel cells (PEMFCs) are considered as the mostpromising alternative power sources with a wide variety of applications owing to their attractive advantages compared to other conventional power sources. During the past decades, the cell performance has been gradually improved. However, the cell performance improvement and cost reduction are still urgently needed due to the requirements of commercialization of PEMFCs.A three-dimensional mathematical model for low temperature proton exchangemembrane fuel cells (LT-PEMFCs) has been developed. The fluid flow, heat andmass transfer inside fuel cells are governed by the mass, momentum, species and energy conservation equations. The transport processes of electrons and protons are determined by the charge conservation equations, and the Butler-Volmer equation and agglomerate model are applied to describe the hydrogen oxidation reaction (HOR) and oxygen reduction reaction (ORR) at the anode and cathode catalyst layers (CLs), respectively. In addition, the liquid water formation and transport in porous regions, and water transport through the membrane are taken into account in the mathematical model. For the agglomerate model, the size and structure of the agglomerates are determined by the agglomerate radius (ragg), the volume fraction of ionomer within the agglomerate (Li,agg), and the thickness of the ionomer film over the agglomerate (δi). The effects of agglomerate model parameters on transport characteristics and cell performance are investigated using the developed model. To avoid the reactant gas leakage and minimize the contact resistance, the assembly force is applied on the fuel cell stack, and accordingly the gas diffusion layer (GDL) deformation arises. Fuel cells with interdigitated flow fields under different assembly forces are systematically studied.A three-dimensional mathematical model for high temperature proton exchangemembrane fuel cells (HT-PEMFCs) has also been developed. The fluid flow, heatand mass transfer, and electron and proton transport inside fuel cells are governed by the mass, momentum, species, energy and charge conservation equations. The transport phenomena and performance of fuel cells with different flow fields have been analyzed and compared using the developed model. In addition, the fuel cell with metal foams as flow distributor has also been investigated and compared to the fuel cell with conventional straight channel flow field.Cooling plates of fuel cells aims to avoid overheating, reduce the maximumtemperature and minimize the temperature variations inside fuel cells. A three dimensional model has been adopted to investigate the cooling plates with non-uniform and wavy flow channel designs. The fluid flow and thermal characteristics of various designs have been examined and compared in detail. (Less)

Multi-gas transportation and electrochemical performance of a polymer electrolyte fuel cell with complex flow channels

A Two-Dimensional Analysis of Mass Transport in Proton Exchange Membrane Fuel Cells

A Comprehensive Three-Dimensional Model Coupling Channel Multi-Phase Flow and Electrochemical Reactions in Proton Exchange Membrane Fuel Cell

Three-dimensional transport model of PEM fuel cell with straight flow channels

A three-dimensional mixed-domain PEM fuel cell model with fully-coupled transport phenomena

Design and Modelling of 3D Bionic Cathode Flow Field for Proton Exchange Membrane Fuel Cell

Large-scale Simulation of Polymer Electrolyte Fuel Cells by Parallel Computing

Insights into the Multi Physical Fields Coupling in Proton Exchange Membrane Fuel Cells: Modeling and Numerical Investigation

A Three-Dimensional, Multicomponent, Two-Phase Model For A Proton Exchange Membrane Fuel Cell With Straight Channels

Three-dimensional Modeling of Transport Phenomena in Proton Exchange Membrane Fuel Cell with Different Fluid Channel

Multi-phase Simulation of Proton Exchange Membrane Fuel Cell with 3D Fine Mesh Flow Field

A 3D Model of PEMFC Considering Detailed Multiphase Flow and Anisotropic Transport Properties

Three-dimensional two-phase flow model of proton exchange membrane fuel cell with parallel gas distributors

Modeling and Simulations of Multiphysics Phenomena Ad Performance in Proton Exchange Membrane Fuel Cells

Three Dimensional Two-Phase and Non-Isothermal Numerical Simulation of Multi-Channels PEMFC

Full-scale multiphase simulation of automobile PEM fuel cells with different flow field configurations

Three-dimensional Simulation of Heat and Mass Transfers in PEMFCs with Conventional and Interdigitated Flow Fields

A 3D, Multiphase, Multicomponent Model of the Cathode and Anode of a PEM Fuel Cell

Multi-scale Modeling of Proton Exchange Membrane Fuel Cell by Coupling Finite Volume Method and Lattice Boltzmann Method

Numerical Analysis of Air-Cooled Proton Exchange Membrane Fuel Cells with Various Cathode Flow Channels

Development of a Multiphysical Multidimensional Modeling of Proton Exchange Membrane Fuel Cell