Abstract:This paper investigates the nonlinear chatter phenomena in cylindrical plunge grinding process. In this dynamic model analyzed here, the grinding wheel and workpiece are regarded as a damped spring mass system and a slender hinged-hinged Euler-Bernoulli beam respectively, and the regenerative interaction between the workpiece and the grinding stone is treated as the main factor that affects the stability of the grinding process. Because of the regenerative effects on the surfaces of both workpiece and grinding wheel, the current penetration depth of the grinding wheel into the workpiece is presented as the differences between the current and previous positions of grinding wheel and vice verse. Then these penetrations are transformed into regenerative force by multiplied contact stiffness. The contact stiffness, the rotation speeds of the grinding wheel and the workpiece are the key parameters involved in the regenerative force model. And the effects of the three parameters related to the regeneration on the dynamic motions of the grinding process are studied in this paper. To locate the stability boundaries in the parameter space, a continuation algorithm has been established to numerically compute the critical eigenvalues and corresponding parameters. The stability boundaries in the parameter space are obtained as the critical parameters that make the characteristic equations have one pair of pure image eigenvalues and all of the rest have negative real parts. By the obtained stability boundaries, the parameter space is divided into different regions where the grinding process is chatter or chatter free respectively. Following the linear stability analysis, the nonlinear bifurcation analyses are carried out and both supercritical and subcritical Hop bifurcations are found on one stability boundary. Then the Bautin bifurcation theory has been applied to discriminate these different dynamic phenomena, which are seemed contradictory in the former codimension-1 bifurcation analysis. These results show that the regenerative force plays a significant role in inducing chatter in grinding, and the contact stiffness is a key parameter for suppressing chatter. In most work conditions, choosing a softer grinding wheel is suggested. But when one has to grinding hard materials, such as ceramic, glass, hard steels and so on where larger contact stiffness are unavoidable, the rotation speeds of the workpiece and the grinding wheel should be chosen according to the stability analysis, or the unwanted chatter would arise. Another advice is that the parameters should be located not only in the linear stable regions but also far away from the neighborhood of subcritical Hopf bifurcation points where stable steady grinding and large amplitude chatter coexist.

Analysis of Chatter Marks in Accurate Grinding on Optical Curve Grinder

Prediction and Verification Analysis of Grinding Force in the Single Grain Grinding Process of Fused Silica Glass

Three-dimensional modelling and simulation of vibration marks on surface generation in ultra-precision grinding

Experimental investigation into the effect of chatter on surface micro-topography of gears in grinding

Modeling, Analysis, and Removal of Chatter Marks in Flexible Turning

Modeling and Simulation of Grinding Surface Topography Considering Wheel Vibration

Three-dimensional Modeling and Theoretical Investigation of Grinding Marks on the Surface in Small Ball-End Diamond Wheel Grinding

Chatter and Surface Waviness Analysis in Oerlikon Face Hobbing of Spiral Bevel Gears

Curvature Effect on Surface Topography and Uniform Scallop Height Control in Normal Grinding of Optical Curved Surface Considering Wheel Vibration.

An Adaptive Grinding Chatter Detection Method Considering the Chatter Frequency Shift Characteristic

Study of deterministic surface micro-texture generation in ultra-precision grinding considering wheel oscillation

Characterization Methods of Subsurface Cracks in Grinding of Optical Elements

Chatter in a transverse grinding process

An Investigation of the Surface Waviness Features of Ground Surface in Parallel Grinding Process

Non-linear analysis and quench control of chatter in plunge grinding

On-Line Grinding Chatter Detection Based on Minimum Entropy Deconvolution and Autocorrelation Function

Experimental Studies Of Accurate Grinding Online Detection Based On Image Analysis

Early Chatter Detection in Gear Grinding Process Using Servo Feed Motor Current

Bautin Bifurcation Induced Nonlinear Chatter In Cylindrical Plunge Grinding

A new digital measurement method for accurate curve grinding process

A Method of Restraining the Adverse Effects of Grinding Marks on Small Aperture Aspheric Mirrors