Abstract:To evaluate the thermal safety of energetic materials (EMs) using the critical rate of temperature rise of thermal explosion (dT/dt)(Tb) and obtain basic data used to calculate (dT/dt)(Tb), nine expressions to calculate (dT/dt)(Tb) for EMs were derived from Semenov thermal explosion theory and nine autocatalytic reaction rate equations, d alpha/dt=Aexp(-E/RT)alpha(1-alpha) (I), d alpha/dt=Aexp(-E/RT)(1-alpha)(n)(1+K-cat alpha) (II), d alpha/dt=Aexp(-E/RT) [alpha(a)-(1-alpha)(n)] (III), d alpha/dt=A(1)exp(-E-a1/RT) (1-alpha) + A(2)exp(-E-a2/RT) alpha(1-alpha) (IV), d alpha/dt=A(1)exp(-E-a1/RT) (1-alpha)(m) + A(2)exp(-E-a2/RT)alpha(n)(1-alpha)(p) (V), d alpha/dt=Aexp(-E/RT) (1-alpha) (VI), d alpha/dt=exp(-E/RT) . (1-alpha)(n) (VII), d alpha/dt=A(1)exp(-E-a1/RT)+A(2)exp(-E-a2/RT)(1-alpha) (VIII) and d alpha/dt=A(1)exp(-E-a1/RT)+A(2)exp(-E-a2/RT)alpha. (1-alpha) (IX), using reasonable hypotheses. A method to determine the kinetic parameters in the nine autocatalytic decomposition reaction rate equations and (dT/dt)(Tb) of EMs when autocatalytic decomposition converts into thermal explosion from difference scanning calorimetry (DSC) curves at different heating rates (beta) was presented. The onset temperature (T-e0) corresponding to heating rate beta -> 0, the critical temperature of thermal explosion (T-b) and the conversion degree (alpha(b)) corresponding to T-b used in the calculation of (dT/dt)(Tb) were obtained from analysis of DSC curves. The kinetic parameters of the autocatalytic decomposition reactions in Eqs.(I) and (VI), and Eqs.(II)-(V), (VII)-(IX) were estimated by the linear least-squares method and trust region approach, respectively. The values of (dT/dt)(Tb) for EMs were obtained from basic DSC data. Results show that (1) under non-isothermal DSC conditions, the autocatalytic decomposition reaction of nitrocotton (NC) (13.54% N) can be described by the apparent empiric-order equation d alpha/dt=10(15.82)exp(-170020/RT) (1-alpha)(1.11) + 10(15.82)exp(-157140/RT)alpha(1.51)(1-alpha)(2.51), and (2) the value of (dT/dt)(Tb) for NC (13.54% N) when autocatalytic decomposition converts into thermal explosion is 0.103 K.s(-1).

Kinetic parameters of the thermal explosion reaction of Ni-Al-Fe system

Study on thermal explosion delay time of NiAl(Fe) system

Assessment of Mobilities of the B2 Phase in the Nickel-Chromium-Aluminum System

Diffusion mobilities for the B2-b.c.c. phase in the Ni–Al binary system

Exploring the Combustion Mechanism of Single Micron-Sized Aluminum Particles with a Numerical Model

Thermal properties of decomposition and explosion for CL-20 and CL-20/n-Al

Method to Determine the Kinetic Parameters of the Autocatalytic Decomposition Reaction and Critical Rate of Temperature Rise of Thermal Explosion of Energetic Materials from DSC Curves

Reactive Molecular Dynamics Simulation of Thermal Decomposition for Nano-Aluminized Explosives

Thermal Explosion in a Powder Mixture of Aluminum with Nickel Preactivated in a Low-Energy Laboratory Mill

KINETICS OF COMBUSTION IN THE LAYERED Ni-Al SYSTEM

Thermodynamic analysis of thermite reactions for synthesizing Ni-based alloys

Full factorial design analysis of thermodynamic and kinetic parameters in simulated thermite reaction propagation

Kinetics analysis and reaction characteristics of aluminum-lithium alloys in water vapor

Study on combustion characteristics and pyrotechnic cutting effects of bimetal thermite Ni/Al/Fe2O3 system

Thermal decomposition and kinetics of electrically controlled solid propellant through thermogravimetric analysis

REACTION MECHANISM OF CONTINUALLY HEATING Ni AND A1 PARTICLES

Deformation, damage, and reaction characteristics during the collision between Ni and Al nanoparticles

Dissolution–precipitation mechanism of self-propagating high-temperature synthesis of mononickel aluminide

Thermal Decomposition Kinetics of RDX with Distributed Activation Energy Model

Reactivity of the Ti–Al system: Experimental study and molecular dynamics simulations

Thermodynamic interpretation of reactive processes in Ni-Al nanolayers from atomistic simulations