Abstract:Kaolinite-urea intercalation complex was prepared using kaolinite as intercalation host and urea as intercalating agent. The kaolinite-urea intercalation complex was used as precursor to prepare exfoliated kaolinite by deintercalating urea molecules from the interlayers of kaolinite through ultrasonic treatment. X-ray diffraction (XRD) and scanning electron microscopy (SEM) were used to characterize the as-prepared exfoliated kaolinite. A broad 001 diffraction of kaolinite with weak intensity showed the random orientation of kaolinite platelets. SEM micrograph confirmed the exfoliation of kaolinite particles with layer thickness of no more than 50 nm. The exfoliated kaolinite particles were used as filler to poly(ethylene-oxide)/LiClO4 (PEO/LiClO4) system to prepare PEO/kaolinite composites, with the aim to improve the ion conductivity and mechanical property of the PEO matrix. SEM, transmission electron microscopy (TEM), XRD and Fourier transform infrared spectroscopy (FTIR) were used to characterize the PEO/kaolinite composites. SEM and TEM micrographs exhibited a good dispersion of exfoliated kaolinite in PEO matrix. XRD results showed that the crystallinity of PEO was gradually decreasing with increased exfoliated kaolinite content. FTIR analysis indicated that the hydrogen bonding was formed between the oxygen atoms of PEO segments and the hydroxyl groups on kaolinite surface, and this interaction between PEO and kaolinite was beneficial to the decrease in crystallinity of PEO. In order to evaluate the effect of the exfoliated kaolinite on ion conductivity and mechanical property of PEO matrix, AC impedance measurement and mechanical test were carried out. The results indicated that the ion conductivity of the composites gradually increased with increased exfoliated kaolinite content and reached 6.0 x 10(-5) S/cm at filler concentration of 20 wt%. The formation of amorphous region around the exfoliated kaolinite was beneficial for the Li+ ion conduction in PEO matrix. When the exfoliated kaolinite content reached 10 wt%, the formed amorphous regions were connected to each other to form a network for the transport of Li+ in the interconnected amorphous regions, leading to a sharp increase in ion conductivity. Moreover, the prepared composites under different drying temperature exhibited different ion conductivity. The reason was attributed to the change of PEO crystallinity with drying temperature, and the change trend of the ion conductivity was consistent with that of PEO crystallinity. Under the drying temperature of 95 degrees C, the as-prepared composite possessed high ion conductivity (6.8 x 10(-5) S/cm). In addition, the Young's modulus and tensile strength of the composites were improved because of the introduction of the exfoliated kaolinite into EPO matrix. The composites showed the maximal increase of 256% and 121% in Young's modulus and tensile strength, i.e., to 165.1 MPa and 6.743 MPa respectively, compared to PEO/LiClO4 (46.3 and 3.047 MPa). Therefore, the exfoliated kaolinite was a promising filler to prepare PEO based polymer electrolyte.

Electrorheological Behavior of Kaolinite–polar Liquid Intercalation Composites

Preparation and Characterization of Poly(ethylene-oxide)/Kaolinite Composite Electrolyte

The Role of Exfoliated Kaolinite on Crystallinity, Ion Conductivity, Thermal and Mechanical Properties of Poly(ethylene Oxide)/kaolinite Composites

Facile One-Step Microwave-Assisted Modification of Kaolinite and Performance Evaluation of Pickering Emulsion Stabilization for Oil Recovery Application.

A Molecular Dynamics Study on the Structural and Mechanical Properties of Hydrated Kaolinite System under Tension

Effect of Electrolytes on Interactions Between a Novel Organic-Inorganic Hybrid Polymer Flocculant and Kaolinite Particles

Crystallinity, Ion Conductivity, and Thermal and Mechanical Properties of Poly(ethylene Oxide)–illite Nanocomposites with Exfoliated Illite As a Filler

Spectral and conductivity measurements insights on loading mechanisms of DMSO/water-kaolin complexes

Formation of a Kaolinite-Serine Intercalation Compound Via Exchange of the Pre-Intercalated Transition Molecules in Kaolinite with Serine

Formation of 0.84 Nm Hydrated Kaolinite as an Environmentally Friendly Precursor of a Kaolinite Intercalation Compound

The Effect of Dielectric Polarization Rate Difference of Filler and Matrix on the Electrorheological Responses of Poly(ionic liquid)/Polyaniline Composite Particles

Formation of intercalation compound of kaolinite-glycine via displacing guest water by glycine.

Rheological and Interfacial Properties of Colloidal Electrolytes

The Effect of Emulsion As Liquid Phase on ER Properties of Electrorheological Fluid

Experimental Study of the Rheology of Water–kaolinite Suspensions

Enhanced electro-responsive electrorheological efficiency of polyethylene oxide-intercalated montmorillonite nanocomposite suspension

Effects of Typical Solvents on the Structural Integrity and Properties of Activated Kaolinite by Wet Ball Milling

The Effects of the Ph‐influenced Structure on the Dielectric Properties of Kaolinite–Water Mixtures

Preparation of a MIL-125/MoS 2 /SiO 2 Ternary Nanohybrid and Its Smart Electrorheological Behavior

Electrorheological Fluid under Elongation, Compression, and Shearing.

SYNTHESIS AND PROPERTIES OF KAOLINITE-METHANOL INTERCALATED COMPLEX