Abstract:In the present work, a numerical model for polymer electrolyte membrane fuel cell (PEMFC) has been employed to investigate the effects of porosity and contact angle distributions of the porous layer on the performance of PEMFC. The three-dimensional, two-phase, and non-isothermal flow solver considers heat transfer, electrochemical reaction, and liquid water saturation. Various cases with different cathode gas diffusion layer (GDL) porosities are performed. The results showed that a better performance is achieved when the GDL porosity is increased because of the reduced mass transport resistance of oxygen. The effects of the porosity distributions on the PEMFC performance were examined by comparing the predictions from the cases with non-uniform porosity and uniform porosity in the cathode GDL. It was shown that the current density of the cases with non-uniform porosity is higher than that of the uniform porosity case when the operation voltage is low. This is due to the fact that non-uniform porosity distributions in the cathode GDL enhance the reactant transport. When the operation voltage is high, the current densities of the cases with non-uniform porosity and uniform porosity are almost the same. Moreover, the influence of contact angle distributions in cathode GDL was explored. Various cases with gradient-decreasing, gradient-increasing, and uniform constant contact angles from GDL/channel interface to GDL/catalyst layer interface were studied. It was found that the case with gradient-increasing contact angle has a better performance due to the larger capillary pressure difference to remove more water. The poor performance of the case with gradient-decreasing contact angle is related to the phenomenon of flooding in the catalyst layer.

Effect of Cathode Gas Diffusion Layers on Air-Breath Direct Methanol Fuel Cell

Effect of Cathode Gas Diffusion Layer on Water Transport and Cell Performance in Direct Methanol Fuel Cells

Effect of the Cathode Gas Diffusion Layer on the Water Transport Behavior and the Performance of Passive Direct Methanol Fuel Cells Operating with Neat Methanol

Effects of the microstructure of anode gas diffusion layer on mass transport and performance of DMFC

The Influence Of Anode Diffusion Layer On The Performance Of Direct Dimethyl Ether Fuel Cell

Effects of Cathode Gas Diffusion Layer Configuration on the Performance of Open Cathode Air-Cooled Polymer Electrolyte Membrane Fuel Cell

Characterisation of Novel and High Performing Double-Sided Microporous-Layers-Coated Gas Diffusion Layers for Polymer Electrolyte Membrane Fuel Cells

Effects of fluorinated ethylene propylene contents in a novel gas diffusion layer on cell performance of a proton exchange membrane fuel cell

Effect of the Gas Diffusion Layer Design on the Water Management and Cell Performance of a PEM Fuel Cell

Effects of the carbon black properties in gas diffusion layer on the performance of proton exchange membrane fuel cells

Effect of cathode gas flow patterns on performance of micro direct methanol fuel cell

Effect of anode diffusion layer fabricated with mesoporous carbon on the performance of direct dimethyl ether fuel cell

Three-dimensional graphene as gas diffusion layer for micro direct methanol fuel cell

The impact of anode gas diffusion layer structure on fuel cell performance

Effect of pore size distribution in the gas diffusion layer adjusted by composite carbon black on fuel cell performance

Influence of cathode gas diffusion media on the performance of the PEMFCs

Cathode Electrochemical Performance of PEMFCs with Compressed Gas Diffusion Layer: A Pore-Scale Investigation

The influence of anode gas diffusion layer on the performance of low-temperature DMFC

Effects of Cathode GDL Gradient Porosity Distribution along the Flow Channel Direction on Gas-Liquid Transport and Performance of PEMFC

Study on preparation process and durability of gas diffusion layer of proton exchange membrane fuel cell

Effects of Cathode Gas Diffusion Layer Porosity and Contact Angle Distributions along Through-Plane Direction on the Performance of Polymer Electrolyte Membrane Fuel Cell