Abstract:The process of DTH (down-the-hole) hammer drilling has been characterized as a very complex phenomenon due to its high nonlinearity, large deformation and damage behaviors. Taking brittle materials (concrete, granite and sandstone) as impact specimens, the explicit time integration nonlinear finite element code LS-DYNA was employed to analyze the impact process and the penetration boundary conditions of DTH hammer percussive drilling system. Compared with previous studies, the present model contains several new features. One is that the 3D effects of DTH hammer drilling system were considered. Another important feature is that it took the coupling effects of brittle materials into account to the bit-specimen boundary of the drilling system. This distinguishes it from the traditional approaches to the bit-rock intersection, in which nonlinear spring models are usually imposed. The impact forces, bit insert penetrations and force-penetration curves of concrete, granite and sandstone under DTH hammer impact have been recorded; the formation of craters and fractures has been also investigated. The impact loads of piston-bit interaction appear to be relatively sensitive to piston impact velocity. The impact between piston-bit interaction occurs at two times larger forces, whereas the duration of the first impact doesn't change with respect to the piston velocity. The material properties of impact specimen do not affect the first impact process between the piston and bit. However, the period between the two impacts and the magnitudes of the second impact forces greatly depend on the specimen material properties. It is found that the penetration depth of specimen is dependent on the impact force magnitude and the macro-mechanical properties of the brittle materials.

Effect on Numerical Simulation of DTH Hammer Bit Insert Impact Process by Mesh Size

Simulation study of DTH hammer bit insert impact process

Numerical Simulation of Impact on Pneumatic Dth Hammer Percussive Drilling

Numerical Simulation of the Longitudinal Impact of Hammer Percussive Drilling System

Research on Numerical Simulation of Rock Breaking Using Tbm Disc Cutters Based on Udec Method

Simulation of Hard-Soft Material Interaction under Impact Loading Employing the Material Point Method

Numerical Simulation on Failure Process of Prestressed Concrete Structures under Impact Load

Determining the Impact Behavior of Concrete Beams Through Experimental Testing and Meso-Scale Simulation: II. Particle Element Simulation and Comparison

Numerical simulation of forming of replacement piers during a dynamic replacement process

Numerical study on craters and penetration of concrete slab by ogive-nose steel projectile

Numerical simulation study on rock-breaking process and mechanism of compound impact drilling

Multiple Impact Phenomenon in Impact Hammer Testing: Theoretical Analysis and Numerical Simulation

Energy transfer efficiency and rock damage characteristics of a hydraulic impact hammer with different tool shapes

Impact Splitting Tensile Experiments of Concrete and Numerical Modeling by Meso-Scale Discrete Elements

Research on the Penetration Coefficient During the Rock Drilling Process by Cyclic Impact

Numerical simulation of the effect of internal hole defect size on the mechanical properties of limestone

Numerical simulation on the dynamic mechanical response and fracture mechanism of rocks containing a single hole

Impact Simulation on Ductile Metal Pipe with Polymer Coating by a Coupled Finite Element and Meshfree Method

Numerical Simulation of Penetration in Concrete Sheet Based on SPH Method

The Influence of Target Mesh on the Simulation Results of High Velocity Projectile Penetration

Numerical analysis of size effect on the deformation behavior and damage evolution mechanism of segmental tunnel lining rings