Abstract:In view of the decreasing trend of column widths in steel residential buildings, a new type of concrete filled rectangular steel tubular column-H-section steel beam connections with external stiffeners is proposed. The diaphragm is removed in this connection. Pseudo-static tests of seven new joint specimens were carried out. The test parameters were the section of the steel beam and the thickness and the height of the long side of the external stiffeners. The failure modes, hysteretic curves, skeleton curves, strength, stiffness degradation, strength degradation, ductility and energy dissipation capacity of the joints were studied. The test results show that there were three failure modes of this new joint, namely, tensile failure of beam flange, weld failure between beam flange and external stiffener, and column wall failure near the external stiffener. The ductility coefficient was 2.17 to 3.67, the equivalent viscous damping coefficient was 0.2 to 0.3, and the average drift ratio was 1/49. The seismic performance of the joint met the requirements of strong joints and weak members. Increasing the thickness or the height of the long side of the external stiffeners can increase the strengths of the joints. The premature cracking of the beam flange, the welding seam between beam flange and external stiffener, or the column wall will reduce the ductility and energy dissipation capacity of the joints. It is proposed that the connection coefficient should be 1.4 when checking the ultimate strength of the column wall and joint weld. The strengthening or weakening measures on the flange at the beam ends can be taken to ensure that the new joints have a sufficient plastic deformation capacity.

Test Method of Beam-Column Joints under Bi-directional Load

EXPERIMENTAL STUDY ON THE SEISMIC BEHAVIOR OF CFST RECTANGULAR COLUMN TO H-SECTION STEEL BEAM CONNECTIONS WITH EXTERNAL STIFFENERS

Experimental Evaluation of Steel Beam Bolted to Reinforced Concrete Column Connections

Experimental study on seismic behavior of assembled steel beam-PC column composite frames

Experimental Research on Seismic Behavior of Reinforced Concrete Column-to-Steel Beam Joints with Bolted End-plate

Experimental Study on Reduced I-beam to CFRST Column Joints under Cyclic Loading

Research on seismic responses of 3D joints with CFT column and composite beam under bi-directional loading

An Overview of Experimental Research on Seismic Behavior of 3D Composite Steel-Concrete Joints

Experimental Study on the Seismic Performance of 3d Joints Between Concrete-Filled Square Steel Tubular Columns and Composite Beams

Experimental investigation on joints between steel-reinforced concrete T-shaped column and reinforced concrete beam under bidirectional low-cyclic reversed loading

Static and Seismic Experiments on the Beam-Column Joints of a Underground Cylindrical Garage Prefabricated Integrated Structure

Tests on seismic behavior of RC beam-composite steel tube confined concrete column joints

Experimental and Numerical Study on Cyclic Behaviour of Steel Beam-to-column Joints

A Beam–column Joint Element for Analysis of Reinforced Concrete Frame Structures

Seismic behavior of reduced beam section joints considering concrete floor effect

Performance of Concrete-Encased CFST Column-to-beam 3-D Joints under Seismic Loading: Analysis

Static and Seismic Experimental Study of Novel Prefabricated Beam-Column Joints with Elongated-Hole Brackets

An experimental study on the seismic performance of beam-column joints in steel frames with the effect of concrete slabs considered

Experimental study on the seismic behavior of an innovative stepped beam-column joint

Behaviour of concrete-encased concrete-filled steel tubular column to steel beam joints under cyclic loading

Experimental study and finite element analysis on the new type connections of a project