Abstract:Duraisamy, Murali ; Recently, the renewable energy applications require the development of highly efficient DC-DC converters with higher voltage transfer gain capability to meet out the increased global power demand. The non-isolated DC-DC converters are preferred due to certain drawbacks of isolated structures. The traditional boost, SEPIC (single-ended primary-inductor converter), and CUK based DC-DC converter structures are modified with additional power switches, diodes, and passive components in order to achieve high voltage gain. However, the modified structures with large number of active and passive elements suffer from the drawbacks of increased complexity of control algorithm, reduced power conversion efficiency and higher converter cost. Hence, the researchers started to explore more on single power switch configured non-isolated high step-up DC-DC converter topologies using hybrid concept. The research work presented in this paper explores such a high gain single-switch hybrid DC-DC converter structure that combines the conventional SEPIC and CUK topologies to achieve enhanced voltage gain. In the proposed hybrid topology, the input current is continuous during all modes of converter operation. Moreover, the power switch experiences only low voltage-current stress. The closed-loop configuration of the proposed hybrid converter is implemented using classic PID (Proportional+Integral+Derivative) and FOPID (Fractional Order PID) controllers, and simulated in MATLAB / SIMULINK environment with duty ratio D = 0.7 for the power switch. The results demonstrate that the dynamic performance of the converter with FOPID controller is much improved in terms of reduced settling time, overshoot, and ripples for the output voltage, as compared to that with classic PID controller.

The Contrast Buk-boost Chopper Circuit and Cuk Chopper Circuit Based on Simulink Simulatiocn

Study of a Single-stage Three-phase PFC DC/DC Converter With Series-parallel Connected Transforms

Study of Bi-Directional Buck-Boost Converter with Different Control Methods

Modeling and Control for DC-DC Converters Based on Hybrid System

Soft switching characteristics of a novel and efficient DC/DC converter

Performance Analysis of Single Phase High Step-Up Converter with Coupled Inductor Multiplier

Three-phase Current-Source Buck Type PFC Converter with Reverse-Blocking IGBTs

A Design of High-power Buck Converter Based on Synchronous Rectification

One-Cycle Control of Buck-Boost Circuit for Single-phase AC/AC Voltage Conversion

Circuit Topology and Control of Three-Phase PFC Rectifier Bridge

Analysis and simulation study on single-phase H-bridge rectifier/inverter

High Step-Up/Down Switched-Capacitor Based Bidirectional DC-DC Converter

A Comparative study of Analog and digital Controller On DC/DC Buck-Boost Converter Four Switch for Mobile Device Applications

Comprehensive Comparison and Analysis of Non‐inverting Buck Boost and Conventional Buck Boost Converters

A Load Adaptive Intelligent IGBT Gate Drive

A novel three-phase seven-level active clamped converter using H-bridge as a level doubling network

A PFC Converter With Novel Integration of Both the EMI Filter and Boost Inductor

Closed-loop Implementation of a Non-isolated High Step-up Integrated SEPIC-CUK DC-DC Converter Structure with Single Switch

Analysis of Buck-Boost PFC Soft Switch Circuit

A CONVERTER FOR BIPOLAR DC LINK BASED ON SEPIC- CUK COMBINATION FOR MICROGRID APPLICATIONS

Tapped-inductor bi-directional Cuk converter with high step-up/down conversion ratio and its optimum design