Research on Structure Optimization of Longitudinal Feed System Design of CNC Spinning Machine
Wei Luo,Zhaojun Yang,Fei Chen,Liping Wang,Bo Lu,Yaming Guo,Hongwei Zheng
DOI: https://doi.org/10.1007/978-981-10-6553-8_57
2017-01-01
Abstract:In order to realize the higher accuracy and stability of the CNC spinning machine, the structure of the weak link should be optimized. According to the force analysis of the carriage and the headstock, a longitudinal feed system with double screws three guides structure is proposed. A new double improved optimization method that to identify and improve the weak system basing on the static and dynamic characteristics of the whole machine, and then to the weak parts is proposed. Firstly, ANSYS Workbench software is used to analyze the static and dynamic characteristics of the whole machine, and the longitudinal feed system is identified as weak system. Aiming at the structural optimization of the longitudinal feed system, four structural models are established. The static and dynamic characteristics are contrastive analyzed by single factor analysis. The results show that the longitudinal feed system with double screws three guides structure has small static total deformation, high dynamic stiffness and strong anti-vibration ability, and identified that the carriage is the key part to affect the longitudinal feed system. Then the topology optimization and shape optimization method are used to optimize the structure of the carriage. Finally, the whole machine performance of the double screws three guides structure before and after the optimization is contrastive verified. The results show that under the premise of quality reduction, the static total deformation of the whole machine is reduced by 5.7%, and the natural frequency of the first six orders are improved in different degrees. The second natural frequency is increased by 21.7%, and the third natural frequency is increased by 21.2%. This new type of structure and double optimization method have a good engineering application value.