Abstract:In this work, (Ba0.75Sr0.25) (Ti0.95Co0.05) O3 perovskite nanostructured material, denoted subsequently as Co-doped BaSrTiO3, was synthesized in a one-step process in hydrothermal conditions. The obtained powder was heat-treated at 800 °C and 1000 °C, respectively, in order to study nanostructured powder behavior during thermal treatment. The Co-doped BaSrTiO3 powder was pressed into pellets of 5.08 cm (2 inches) then used for thin film deposition onto commercial Al2O3 substrates by RF sputtering method. The microstructural, thermal, and gas sensing properties were investigated. The electrical and thermodynamic characterization allowed the evaluation of thermodynamic stability and the correlation of structural features with the sensing properties revealed under real operating conditions. The sensing behavior with respect to the temperature range between 23 and 400 °C, for a fixed CO2 concentration of 3000 ppm, highlighted specific differences between Co-doped BaSrTiO3 treated at 800 °C compared to that treated at 1000 °C. The influence of the relative humidity level on the CO2 concentrations and the other potential interfering gases was also analyzed. Two possible mechanisms for CO2 interaction were then proposed. The simple and low-cost technology, together with the high sensitivity when operating at room temperature corresponding to low power consumption, suggests that Co-doped BaSrTiO3 has a good potential for use in developing portable CO2 detectors.

Study on the Characteristics of Ag Doped Cuo-Batio3co2 Sensors

Study on Gas Sensing Property of Metal Particle Doped Multi-Walled Carbon Nanotubes

A computational study on the Al-doped CuO nanocluster for CO gas sensor applications

Computational assisted tuning of Co-doped TiO2 nanoparticles for ammonia detection at room temperatures

The effects of Co doping on the gas sensing performance of In2O3 porous nanospheres

Efficient room temperature carbon dioxide gas sensor based on barium doped CuO thin films

Preparation of High-Performance 2-Butanone Gas Sensors Using Ag Decorated on the Surface of Co3O4 Nanocomposite with Defects Induced by Fe Doping

Adsorption and Potential CO Gas-Sensing Performance of the Fe-Doped Ti2CO2-MXenes: A First-Principles Study

Study on gas-sensing properties of Cd1-xAgxIn2O4 semiconductor materials

Effect of Cd dopant on structural, optical and CO2 gas sensing properties of ZnO thin film sensors fabricated by chemical bath deposition method

Adsorption properties of noble-metal (Ag, Rh, or Au)-doped CeO 2 (1 1 0) to CO: A DFT + U study

Gas Sensing Characteristics of Nano-Structured Metal Oxides

Highly sensitive CO gas sensor based on ternary metal sulfides PbSbS quantum dots: Experimental and DFT study

CuO surface doped In2O3/CeO2 nanofibers for ppb-ppm level carbon monoxide gas detection in low-temperature

Effect of doping concentration of Cu2+ ion on ZnO thin film for detection of CO gas

Experimental Study on the Mechanism of BaTiO3-based PTC–CO Gas Sensor

Cobalt-doping-induced energy level and oxygen vacancy dual modulation in tin dioxide for efficient triethylamine detection

Facile wet chemical synthesis of Al doped CuO nanoleaves for carbon monoxide gas sensor applications

Effects of CeO2 Doping on Gas Sensing Properties of ZnO Thin Films

Improved NO2 Sensing Performance of Ternary Nanocomposites Based on Au-doped Co3O4/CuO

Nanostructured Cobalt Doped Barium Strontium Titanate Thin Films with Potential in CO2 Detection