Abstract:In bone tissue engineering, polycaprolactone (PCL) is a promising material with good biocompatibility, but its poor degradation rate, mechanical strength, and osteogenic properties limit its application. In this study, we developed an Mg-1Ca/polycaprolactone (Mg-1Ca/PCL) composite scaffolds to overcome these limitations. We used a melt blending method to prepare Mg-1Ca/PCL composites with Mg-1Ca alloy powder mass ratios of 5, 10, and 20 wt%. Porous scaffolds with controlled macro- and microstructure were printed using the fused deposition modeling method. We explored the mechanical strength, biocompatibility, osteogenesis performance, and molecular mechanism of the Mg-1Ca/PCL composites. The 5 and 10 wt% Mg-1Ca/PCL composites were found to have good biocompatibility. Moreover, they promoted the mechanical strength, proliferation, adhesion, and osteogenic differentiation of human bone marrow stem cells (hBMSCs) of pure PCL. In vitro degradation experiments revealed that the composite material stably released Mg 2 + ions for a long period; it formed an apatite layer on the surface of the scaffold that facilitated cell adhesion and growth. Microcomputed tomography and histological analysis showed that both 5 and 10 wt% Mg-1Ca/PCL composite scaffolds promoted bone regeneration bone defects. Our results indicated that the Wnt/ beta -catenin pathway was involved in the osteogenic effect. Therefore, Mg-1Ca/PCL composite scaffolds are expected to be a promising bone regeneration material for clinical application. Statement of significance: Bone tissue engineering scaffolds have promising applications in the regeneration of critical-sized bone defects. However, there remain many limitations in the materials and manufacturing methods used to fabricate scaffolds. This study shows that the developed Ma-1Ca/PCL composites provides scaffolds with suitable degradation rates and enhanced boneformation capabilities. Furthermore, the fused deposition modeling method allows precise control of the macroscopic morphology and microscopic porosity of the scaffold. The obtained porous scaffolds can significantly promote the regeneration of bone defects. (c) 2022 Chongqing University. Publishing services provided by Elsevier B.V. on behalf of KeAi Communications Co. Ltd. This is an open access article under the CC BY-NC-ND license ( http://creativecommons.org/licenses/by-nc-nd/4.0/ ) Peer review under responsibility of Chongqing University

Hierarchically microporous/macroporous scaffold of magnesium-calcium phosphate for bone tissue regeneration.

Development of Magnesium Calcium Phosphate Biocement for Bone Regeneration

3D robocasting magnesium-doped wollastonite/TCP bioceramic scaffolds with improved bone regeneration capacity in critical sized calvarial defects

An injectable porous bioactive magnesium phosphate bone cement foamed with calcium carbonate and citric acid for periodontal bone regeneration

Nanofiber-induced Hierarchically-Porous Magnesium Phosphate Bone Cements Accelerate Bone Regeneration by Inhibiting Notch Signaling

3D-printed MgO nanoparticle loaded polycaprolactone β-tricalcium phosphate composite scaffold for bone tissue engineering applications: In-vitro and in-vivo evaluation

PCL-Coated Multi-Substituted Calcium Phosphate Bone Scaffolds with Enhanced Properties

PCL nanofibrous incorporating unique matrix fusion protein adsorbed mesoporous bioactive glass for bone tissue engineering

Double Network Composite Scaffolds Based on Oxidized Dextran/Gelatin Hydrogel and Magnesium Calcium Phosphate Cement

An injectable bioactive magnesium phosphate cement incorporating carboxymethyl chitosan for bone regeneration

PLA–tPU based magnesium ion incorporated CSH/nHA bioactive porous composite scaffold for critical bone defect repair

Influence of Monocalcium Phosphate on the Properties of Bioactive Magnesium Phosphate Bone Cement for Bone Regeneration

3D interconnected porous PMMA scaffold integrating with advanced nanostructured CaP-based biomaterials for rapid bone repair and regeneration

Biomimetic synthesis of Mg-substituted hydroxyapatite nanocomposites and three-dimensional printing of composite scaffolds for bone regeneration.

A novel open-porous magnesium scaffold with controllable microstructures and properties for bone regeneration

Magnesium Modified β-Tricalcium Phosphate Induces Cell Osteogenic Differentiation In Vitro and Bone Regeneration In Vivo

Mg‐CS/HA Microscaffolds Display Excellent Biodegradability and Controlled Release of Si and Mg Bioactive Ions to Synergistically Promote Vascularized Bone Regeneration

Novel artificial tricalcium phosphate and magnesium composite graft facilitates angiogenesis in bone healing

Magnetically responsive micro-clustered calcium phosphate-reinforced cell-laden microbead sodium alginate hydrogel for accelerated osteogenic tissue regeneration

3D gel-printed porous magnesium scaffold coated with dibasic calcium phosphate dihydrate for bone repair in vivo

3D-Printed Mg-1Ca/polycaprolactone Composite Scaffolds with Promoted Bone Regeneration