Abstract:This paper proposes a piezoresistive high-temperature absolute pressure sensor based on (100)/(111) hybrid SOI (silicon-on-insulator) silicon wafers, where the active layer is (100) silicon and the handle layer is (111) silicon. The 1.5 MPa ranged sensor chips are designed with the size as tiny as 0.5 × 0.5 mm, and the chips are fabricated only from the front side of the wafer for simple, high-yield and low-cost batch production. Herein, the (100) active layer is specifically used to form high-performance piezoresistors for high-temperature pressure sensing, while the (111) handle layer is used to single-side construct the pressure-sensing diaphragm and the pressure-reference cavity beneath the diaphragm. Benefitting from front-sided shallow dry etching and self-stop lateral wet etching inside the (111)-silicon substrate, the thickness of the pressure-sensing diaphragm is uniform and controllable, and the pressure-reference cavity is embedded into the handle layer of (111) silicon. Without the conventionally used double-sided etching, wafer bonding and cavity-SOI manufacturing, a very small sensor chip size of 0.5 × 0.5 mm is achieved. The measured performance of the 1.5 MPa ranged pressure sensor exhibits a full-scale output of approximately 59.55 mV/1500 kPa/3.3 VDC in room temperature and a high overall accuracy (combined with hysteresis, non-linearity and repeatability) of 0.17%FS within the temperature range of −55 °C to 350 °C. In addition, the thermal hysteresis is also evaluated as approximately 0.15%FS at 350 °C. The tiny-sized high temperature pressure sensors are promising in various industrial automatic control applications and wind tunnel testing systems.

A high-temperature silicon-on-insulator stress sensor

Design, Fabrication, and Calibration of a Piezoresistive Stress Sensor on SOI Wafers for Electronic Packaging Applications

Thin Layer Soi-Fets Used for Stress-Sensing and Its Application in Accelerometers

High-temperature piezoresistive pressure sensor based on implantation of oxygen into silicon wafer

Simulation and Fabrication of SiO2-based Piezoresistive Microbridges for Chem/biosensors

A novel SOI pressure sensor for high temperature application

An SOI-Structured Piezoresistive Differential Pressure Sensor with High Performance

Liquid-free, piezoresistive, SOI-based pressure sensor for high temperature measurements up to 400 °C

High Temperature Silicon-on-Insulator Piezoresistive Pressure Sensitive Chip

Femtosecond Laser Processing Assisted SiC High-Temperature Pressure Sensor Fabrication and Performance Test

A High-Temperature Piezoresistive Pressure Sensor with an Integrated Signal-Conditioning Circuit

A Single-Side Micromachined MPa-Scale High-Temperature Pressure Sensor

Design and Optimization of SOI Piezoresistive Microcantilever Sensors for Use in Surface Stress Measurement

High-Temperature Piezoresistive Pressure Sensitive Silicon Chip and Electrostatic Bonding Process

Design of Piezoresistive Micro-Cantilever with Stress Concentration Regions

Inverted-Cup High-Temperature and High-Frequency Piezoresistive Pressure Sensor

Development of MEMS-based piezoresistive 3D stress/strain sensor using strain technology and smart temperature compensation

High Temperature Pressure Sensor Fabricated with Smart Cut SOI Materials

HIGH-PRESSURE HIGH-TEMPERATURE BULK-TYPE PIEZORESISTIVE PRESSURE SENSOR

A Novel Semiconductor Piezoresistive Thin-film Strain Gauge with High-sensitivity

A Front-Side Released Single Crystalline Silicon Piezoresistive Microcantilever Sensor