Modeling and Simulation of D-STATCOM for Unbalance Three-phase Distribution Power System
DUAN Da-peng,JIANG Xiu-chen,SUN Cai-xin,SONG Qiang,TIAN Wei
DOI: https://doi.org/10.13336/j.1003-6520.hve.2008.08.044
2008-01-01
Abstract:D-STATCOM,which is applied to compensate unbalance load in distribution electrical power system,has many advantages such as perfect dynamic characteristic,low total harmonics distortion and high power density,it can compensate balance and unbalance load real-timely on the spot.Consequently,based on the power circuit of the D-STATCOM with segregated phase compensation,after logical on-off function was defined as 1 or-1 firstly,the dynamic mathematic model with fourth-order of D-STATC OM was established in time domain,then was transformed to transfer function in frequency domain.Subsequently,based on the instantaneous power theory,command current detection method of unbalance load and direct current control mode were presented.The double closed-loop control system,which includes three phase current and the voltage of capacitor,was realized.Furthermore,the whole system of D-STATCOM was simulated using the mathematic model proposed in this paper and devices respectively in 380 V three-phase four-wire distribution power system.Simulation results show that the dynamic process was 0.01 s when the load changed from 100 kVA inductive load to-100 kVA capacitive load,and after compensation,the active power became smooth and the reactive power was around zero.In addition,the voltage of the capacitor was around 400 V but fluctuant due to the absorbability and release of power which was to keep the voltage of capacitor and to complete the compensation.It is concluded that the proposed mathematic model of D-STATCOM is correct,command current detection method of unbalance load and direct current control mode are valid,and D-STATCOM has good dynamic and static compensation performance in balance and unbalance distribution power system.