Abstract:The transition section between bottom dense zone and top dilute zone is important for fast gas-solids catalytic reactions,such as methanol to olefins(MTO).Solids concentration and fluctuation parameters in the transition section of a fluidized bed with 95 mm i.d.were measured by using reflective optical fiber probe(PV6D).The influences of superficial gas velocity and static bed height were investigated.An Eulerian-Eulerian two-fluid model that incorporated kinetic theory of granular flow and modified three-zone drag law was used to predict the flow structure in the turbulent fluidized bed.The axial and radial distributions of solids concentration were simulated by means of computational fluid dynamics(CFD).The experiments showed two axial profiles of solids distribution in the transition section:exponential and S-shaped.The maximum gradients of both axial and radial solids concentration profiles were located in the transition section,which meant that solids distribution in the transition section was much more non-uniform than that in the dilute and dense sections.The change of gas velocity and static bed height would cause a shift between exponential and S-shaped profiles,and significantly affect solids concentration in the dense region near the wall and at the bottom.Probability density distribution of local solids concentration revealed that when static bed height was small,the location of maximum voidage would gradually move from core region to annular region with increasing gas velocity,resulting in a bimodal distribution of voidage.A modified three-zone drag model was proposed by taking the effect of particle clustering into account for CFD simulation.The simulated solids concentration distribution agreed well with experimental data in the transition section except for the distributor zone.

A Mathematic Model for Solids Entrainment Flux on the Surface of the Dense Region in a Circulating Fluidized Bed

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

Experimental and Numerical Study of Solids Concentration Distribution in Transition Section of Turbulent Fluidized Bed

Steady-state Simulation of Core-Annulus Flow in a Circulating Fluidized Bed (CFB) Riser

CFD Simulation and Hydrodynamics Characterization of Solids Oscillation Behavior in a Circulating Fluidized Bed with Sweeping Bend Return

CFD Simulation and Experiments of Dynamic Parameters in Gas–solid Fluidized Bed

Numerical Simulations of Flow Structure and Heat Transfer in a Central Jet Bubbling Fluidized Bed

Mass flux profiles and flow regimes in a high density circulating Fluidized bed

CFD modelling and simulation of hydrodynamics in liquid-solid circulating fluidized beds

Mass flux profiles in a high density circulating fluidized bed

Solids mass flux and mean dynamic solids hold-up in the packed section of the gas-solid-solid circulating fluidized bed

A model for the circulating fluidized bed

A Hydrodynamic Model for Circulating Fluidized Beds with Low Riser and Tall Riser

Experimental and Cfd Study on the Hydrodynamic Characters of Dense Liquid-Solid Fluidized Bed

A Coupled Eulerian Fluid Phase-Eulerian Solids Phase-Lagrangian Discrete Particles Hybrid Model Applied to Gas-Solids Bubbling Fluidized Beds

Lateral Solids Mixing In The Dense Zone Of A Circulating Fluidized Bed

Discrete Element Study of Solid Circulating and Resident Behaviors in an Internally Circulating Fluidized Bed

A Euler-Euler Hydrodynamic Modelling and Simulation of Dense Particle Flow in a Small-Scale Fluidized Bed

Numerical simulation of granular flow behaviors in liquid-solid circulating fluidized bed

Modeling of dense particle flow in the annulus of spouted beds with draft tube

LES-DEM Investigation of Dense Flow in Circulating Fluidized Beds