Abstract:The unstable solids circulation behavior in a circulating fluidized bed (CFB) with sweeping bend return is investigated by monitoring pressure fluctuations in a bench-scale model. The pressure fluctuations at the top and bottom of the riser and downer are processed using the Fast Fourier Transform (FFT) technique to extract the dominant frequency and its amplitude in order to quantify the effects of riser inlet gas velocity, valve opening and bed inventory on the operation of the unit. The differential pressure drop fluctuations between riser and downer are processed in a similar manner. The study reveals that the unstable solids circulation behavior is cyclical vis-a-vis gas–solids flow pattern and solids exchange between riser and downer, named as solids oscillation circulation behavior. A dominant frequency of 0.25Hz is observed for all pressure fluctuation signals corresponding to the cyclical change of bed inventory and gas flow rate in riser and downer induced by the oscillation circulation behavior. An additional dominant frequency for the pressure fluctuation signals at the riser and downer bottom is also observed related to the gas–solid flow pattern. The solids exchange frequency is strongly related to the dominant frequency of the differential pressure drop. The work also demonstrates that the oscillation behavior is activated by a critical inlet gas velocity or valve opening and that the oscillation frequency increases with the decrease of inlet gas velocity, while it does not change with the valve opening. The solids exchange amount decreases with the decrease of gas flow and small percentage valve opening. The oscillation behavior changes from sine model to rectangular with the increase of bed inventory and thus slugging solids circulation is established.

A model for the circulating fluidized bed

Steady-state Simulation of Core-Annulus Flow in a Circulating Fluidized Bed (CFB) Riser

Novel Bubble–Emulsion Hydrodynamic Model for Gas–Solid Bubbling Fluidized Beds

CFD Simulation of an Agitated Gas-Fluidized Bed: Effects of Particle–particle Restitution Coefficient on the Hydrodynamics

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

CFD Simulation and Hydrodynamics Characterization of Solids Oscillation Behavior in a Circulating Fluidized Bed with Sweeping Bend Return

Experimental research on solids oscillation circulation behavior in circulating fluidized bed

A Hydrodynamic Model of a Circulating Fluidised Bed with Low‐density Particles

A Hydrodynamic Model for Circulating Fluidized Beds with Low Riser and Tall Riser

Investigation of Unstable Solids Circulation Behavior in A Circulating Fluidized Bed with Sweeping Bend Return Using Pressure Frequency Analysis

Effect of Bed Thickness on a Pseudo 2D Gas-Solid Fluidized Bed Turbulent Flow Structures and Dynamics

Modeling of the Minimum Fluidization Velocity and the Incipient Fluidization Pressure Drop in a Conical Fluidized Bed with Negative Pressure

A Mathematic Model for Solids Entrainment Flux on the Surface of the Dense Region in a Circulating Fluidized Bed

Two-fluid modeling of Geldart A particles in gas-fluidized beds

A numerical model of gas-fluidized beds

Improving Solid-Phase Fluidization Prediction in Circulating Fluidized Bed Risers: Drag Model Sensitivity and Turbulence Modeling

Mass flux profiles and flow regimes in a high density circulating Fluidized bed

Mass flux profiles in a high density circulating fluidized bed

A computational fluid dynamics study on the flow field in a liquid–solid circulating fluidized bed riser

Particle Velocity Distribution and Its Prediction in a 14 M Two-Dimensional Circulating Fluidized Bed Riser

Hydrodynamics of three-phase fluidized bed in riser