Enhanced Selectivity in Green Catalytic Epoxidation Using A Supported Cobalt Complex

Rajesh Chakrabarty,Birinchi K. Das,James H. Clark

DOI: https://doi.org/10.1039/b618862a

IF: 9.8

2007-01-01

Green Chemistry

Abstract:A supported reagent made by immobilising a tetrameric cobalt(III) cubane cluster on mesoporous silica catalyses the aerobic oxidation of alpha-pinene with enhanced epoxidation selectivity compared with other systems.

What problem does this paper attempt to address?

Role of the Co-Catalyst in the Asymmetric Coupling of Racemic Epoxides with CO2 Using Multichiral Co(iii) Complexes: Product Selectivity and Enantioselectivity

Wei-Min Ren,Guang-Peng Wu,Fei Lin,Jing-Yang Jiang,Chuang Liu,Yi Luo,Xiao-Bing Lu

DOI: https://doi.org/10.1039/c2sc20068f

IF: 8.4

2012-01-01

Chemical Science

Abstract:The kinetic resolution of racemic terminal epoxides with CO2 as reagent via enantioselective coupling represents an attractive method for affording enantiopure epoxides and optically active organic carbonates. A multichiral cobalt(III) complex in conjunction with an ammonium salt is an efficient catalyst system for the asymmetric coupling reaction of CO2 and racemic epoxides, and up to 97.1% ee for cyclic carbonate product and the highest k(rel) (kinetic resolution coefficient) to date of 75.8 was obtained. The variation of nucleophilic co-catalyst and its relative loading dramatically changes the product selectivity and enantioselectivity. Both the anion and cation of ammonium salts have significant effects on the catalytic kinetic resolution process. An ammonium salt consisting of an anion with poor leaving ability and a bulky cation benefits for improving the enantioselectivity. The excess co-catalyst loading favors selective production of cyclic carbonate via the intramolecular cyclic elimination of the formed linear carbonate. A higher k(rel) was observed in the excess co-catalyst loading, in comparison with one equivalent co-catalyst loading, predominantly resulting in polymer formation at the same temperature. It was also found that the excess co-catalyst loading led to significant increases in the regioselective ring-opening at the methylene carbon of various terminal epoxides, including styrene oxide with an electron-withdrawing group. The present study also offers a detailed mechanistic explanation of the role of the nucleophilic co-catalyst in the asymmetric coupling of racemic epoxides with CO2 using multichiral Co(III) complexes.
Polyoxometalate-nano Gold Hybrid Mesostructured Catalyst for Green Cyclohexene Epoxidation

Umsa Jameel,Mingqiao Zhu,Xinzhi Chen,Zhangfa Tong

DOI: https://doi.org/10.2174/1385272821666170420155632

2017-01-01

Current Organic Chemistry

Abstract:Background: The design of a highly active catalyst is a key point in olefins epoxidation. Recently, polyoxometalates have received an increasing interest in selective oxidation of organic compounds. Their scope as nanoparticle carriers is of immense importance as the high anionic charge associated with them prevents sintering of the nanoparticles which is a major issue related to nanoparticle based catalysts thus increasing the stability of the catalyst. Objective: We have immobilized Na9PMo11O (39)(PMo11) and gold nanoparticles on chloropropyltriethoxysilane functionalized SBA-15 mesoporous material. We investigated the molecular oxygen activation ability and stability of this heterogeneous hybrid catalytic system for green epoxidation of cyclohexene under mild reaction conditions. Method: PMo11 was prepared according to the literature, while PMo11/CPTES-SBA-15, Au/CPTES-SBA-15 and Au/PMo 11/CPTES-SBA-15 were prepared by wet deposition method. The catalytic performance was evaluated in a PTFE lined autoclave and analysis was done by gas chromatography. Results: Cyclohexene epoxidation was carried out on different heterogeneous catalytic systems which included polyoxometalate and CPTES-SBA-15 support, nano gold and CPTES-SBA-15 support and the hybrid material Au/PMo11/CPTES-SBA-15 with varying amounts of doped nanogold. All the samples showed good conversion of cyclohexene and significant selectivity for oxidized products with molecular oxygen as an oxidant under mild conditions. 1 % Au/PMo11/CPTES-SBA-15 delivered 48.1 % conversion and 35.9 % selectivity to epoxide. Conclusion: The CPTES-SBA-15 supported Au/PMo11 hybrid catalytic system demonstrated relatively high catalytic activity and selectivity for the green epoxidation of cyclohexene with molecular oxygen as an oxidant under mild reaction conditions. The hybrid catalyst was regenerated and reused for three cycles without compromising the catalytic performance.
Bioinspired Manganese Complexes and Graphene Oxide Synergistically Catalyzed Asymmetric Epoxidation of Olefins with Aqueous Hydrogen Peroxide

Chengxia Miao,Xingbin Yan,Daqian Xu,Chungu Xia,Wei Sun

DOI: https://doi.org/10.1002/adsc.201600848

IF: 5.981

2017-01-01

Advanced Synthesis & Catalysis

Abstract:Bioinspired manganese complexes of N-4 ligands and graphene oxide (GO) synergistically catalyze the highly enantioselective epoxidation of olefins (up to 99% ee), which is a rare example with GO as a co-catalyst in asymmetric catalysis. GO as a new and key additive not only successfully functions in catalytic amounts, but also has a positive effect for improving the enantioselectivity of the asymmetric epoxidation compared with the traditional stoichiometric organic carboxylic acid method [e.g., chalcone, 95% ee (3.5 mg GO) vs. 84% ee (5 equiv., 75 mg acetic acid), ethyl cinnamate, 84% ee (3.5 mg GO) vs. 19% ee (5 equiv., 75 mg acetic acid)]. The X-ray photoelectron spectroscopy (XPS) spectra of GO before and after the reaction indicate that the intensities of C-O become stronger after the reaction, which may have a certain relationship with hydrogen peroxide (H2O2) and gives a reasonable rationale for the large consumption of H2O2. Also, part of the hydrogen peroxide was used for the oxidation of GO.
Environmentally Friendly Catalysis Using Supported Reagents: Catalytic Epoxidation Using a Chemically Modified Silica Gel

AJ Butterworth,JH Clark,PH Walton,SJ Barlow

DOI: https://doi.org/10.1002/chin.199648112

1996-01-01

ChemInform

Abstract:A hew heterogeneous catalyst based on a chemically. modified mesoporous silica gel possessing immobilised. cobalt ions is developed and successfully applied to the epoxidation of alkenes.
Cobalt Single Atoms on Tetrapyridomacrocyclic Support for Efficient Peroxymonosulfate Activation.

Chiheng Chu,Ji Yang,Xuechen Zhou,Dahong Huang,Haifeng Qi,Seunghyun Weon,Jianfeng Li,Menachem Elimelech,Aiqin Wang,Jae-Hong Kim

DOI: https://doi.org/10.1021/acs.est.0c06086

IF: 11.4

2020-01-01

Environmental Science & Technology

Abstract:Transition-metal catalysts that can efficiently activate peroxide bonds have been extensively pursued for various applications including environmental remediation, chemical synthesis, and sensing. Here, we present pyridine-coordinated Co single atoms embedded in a polyaromatic macrostructure as a highly efficient peroxide-activation catalyst. The efficient catalytic production of reactive radicals through peroxymonosulfate activation was demonstrated by the rapid removal of model aqueous pollutants of environmental and public health concerns such as bisphenol A, without pH limitation and Co2+ leaching. The turnover frequency of the newly synthesized Co single-atom catalyst bound to tetrapyridomacrocyclic ligands was found to be 2 to 4 orders of magnitude greater than that of benchmark homogeneous (Co2+) and nanoparticulate (Co3O4) catalysts. Experimental results and density functional theory simulation suggest that the abundant π-conjugation in the polyaromatic support and strong metal-support electronic interaction allow the catalysts to effectively adsorb and activate the peroxide precursor. We further loaded the catalysts onto a widely used poly(vinylidene fluoride) microfiltration membrane and demonstrated that the model pollutants were oxidatively removed as they simply passed through the filter, suggesting the promise of utilizing this novel catalyst for realistic applications.
A new and efficient methodology for olefin epoxidation catalyzed by supported cobalt nanoparticles

Lucía Rossi-Fernández,Viviana Dorn,Gabriel Radivoy

DOI: https://doi.org/10.3762/bjoc.17.46

2021-02-22

Beilstein Journal of Organic Chemistry

Abstract:A new heterogeneous catalytic system consisting of cobalt nanoparticles (CoNPs) supported on MgO and tert -butyl hydroperoxide (TBHP) as oxidant is presented. This CoNPs@MgO/ t -BuOOH catalytic combination allowed the epoxidation of a variety of olefins with good to excellent yield and high selectivity. The catalyst preparation is simple and straightforward from commercially available starting materials and it could be recovered and reused maintaining its unaltered high activity.

chemistry, organic
A Silica Supported Cobalt (II) Salen Complex As Efficient and Reusable Catalyst for the Selective Aerobic Oxidation of Ethyl Benzene Derivatives

Fatemeh Rajabi,Rafael Luque,James H. Clark,Babak Karimi,Duncan J. Macquarrie

DOI: https://doi.org/10.1016/j.catcom.2010.11.024

IF: 3.51

2011-01-01

Catalysis Communications

Abstract:A silica supported cobalt (II) Salen complex catalyst has been successfully employed in the aerobic oxidation of alkyl aromatics at atmospheric pressure in the presence of N-hydroxyphthalimide (NHPI). The reaction is particularly selective for the oxidation of the benzylic CH2 group and the major product obtained was ketone. The immobilized catalyst can be easily recovered and reused for at least four reaction cycles without any significant loss of its catalytic activity.
Enhanced Interfacial Interaction of Mesoporous N, S Co-Doped Carbon Supported WO3-WS2 for Green and Selective Oxidation of Alcohols

Cai Xu,Liyan Dai,Yingqi Chen,Shaoyong Zhang,Chaozheng He,Xiaozhong Wang

DOI: https://doi.org/10.1016/j.apsusc.2022.155296

2022-01-01

Abstract:WO3-WS2 supported on mesoporous N, S co-doped carbon were prepared via one-step molten-salt strategy, and an enhanced interfacial interaction between metal and carbon was formed, which boosted the selective oxidation of benzyl alcohol to benzaldehyde. Under green conditions (solvent: H2O, oxidant: H2O2, no base-additives), 96.2 % conversion and 97.0 % selectivity were achieved within 2 h. It was found that N, S co-doped carbon with abundant mesopores served as an excellent support, the pyrrolic and graphitic N species of carbon provided main anchoring sites for metal nanoparticles. Additionally, the N, S co-doped carbon support could effectively promote the distribution of metal species, and thereafter induced the formation of metal-carbon interfacial interaction. Such advantages resulted in the satisfactory reusability (negligible activity loss after six cycles) and remarkable catalytic activity. The scavenger tests and EPR results disclosed that center dot OH was the main oxidative species for this reaction. DFT calculations revealed that co-doping of N, S into carbon promoted the adsorption of benzyl alcohol, and the enhanced metal-carbon interaction reduced migration energy barrier of center dot OH on catalyst surface. In sum, this work provided some new insights into the interfacial interaction of mesoporous carbon supported metal catalyst for boosting the selective oxidation of alcohols.
Β-Selective Epoxidation of Δ5-steroids by O2 Using Surface Functionalised Silica Supported Cobalt Catalysts

SM Silvestre,JAR Salvador,JH Clark

DOI: https://doi.org/10.1016/j.molcata.2004.04.034

2004-01-01

Abstract:A general catalytic and relatively environment friendly method for β-epoxidation of Δ5-steroids has been developed, which uses silica supported cobalt as catalysts and molecular oxygen as the oxidant. The reactions are regio- and stereoselective.A whole range of Δ5-steroids, with different functional groups such as hydroxyl, carbonyl or acetyl, as well as different side chains, were conveniently converted to the corresponding biologically interesting 5β,6β-epoxides with high degree of stereoselectivity and high yields.
Hydrophobic Modification of Microenvironment of Highly Dispersed Co3O4 Nanoparticles for the Catalytic Selective Oxidation of Ethylbenzene

Li Zhao,Song Shi,Meng Liu,Chen Chen,Guozhi Zhu,Jin Gao,Jie Xu

DOI: https://doi.org/10.1002/cctc.201901771

IF: 4.5

2020-01-01

ChemCatChem

Abstract:Microenvironments in enzymes play crucial roles in controlling the activities of active centers. Here, hexagonal mesoporous silicas (HMS) with hydrophobic microenvironment was used to mimic the enzymes on the hydrocarbon oxidation with cobalt oxides incorporated as active sites. The variation of the structure and surface properties of the materials with phenyl group incorporation and the state of the supported cobalt oxides were carefully studied. It showed that cobalt oxides presented as Co3O4 distributed evenly among the support, and the catalytic microenvironment was modified by the neighboring phenyl groups to be hydrophobic. This novel catalyst showed enhancement in the adsorption of ethylbenzene and in turn promoted the catalytic conversion than the hydrophilic one. 55.1 % conversion of ethylbenzene and 86.1 % selectivity for acetophenone could be obtained at 393 K for 6 h under 1.0 MPa of O-2 with free solvent. Hydrophobic microenvironment of pore surface was considered as an important factor for the better catalytic activity.
A recyclable cobalt( iii )–ammonia complex catalyst for catalytic epoxidation of olefins with air as the oxidant

Chenlong Wang,Hongju Zhan,Xinhuan Lu,Run Jing,Haifu Zhang,Lu Yang,Xixi Li,Fanfan Yue,Dan Zhou,Qinghua Xia

DOI: https://doi.org/10.1039/d0nj05466f

IF: 3.3

2021-01-01

New Journal of Chemistry

Abstract:A recyclable [Co(NH 3 ) 6 ]Cl 3 complex was synthesized to catalyze the epoxidation of α-pinene. With air as the oxidant, [Co(NH 3 ) 6 ]Cl 3 obtained 97.4% conversion of α-pinene and 98.3% selectivity of epoxide.

chemistry, multidisciplinary
Cobalt single atom site catalysts with ultrahigh metal loading for enhanced aerobic oxidation of ethylbenzene

Yu Xiong,Wenming Sun,Yunhu Han,Pingyu Xin,Xusheng Zheng,Wensheng Yan,Juncai Dong,Jian Zhang,Dingsheng Wang,Yadong Li

DOI: https://doi.org/10.1007/s12274-020-3244-4

IF: 9.9

2021-01-05

Nano Research

Abstract:The oxidation of hydrocarbons to produce high value-added compounds (ketones or alcohols) using oxygen in air as the only oxidant is an efficient synthetic strategy from both environmental and economic views. Herein, we successfully synthesized cobalt single atom site catalysts (Co SACs) with high metal loading of 23.58 wt.% supported on carbon nitride (CN), which showed excellent catalytic properties for oxidation of ethylbenzene in air. Moreover, Co SACs show a much higher turn-over frequency (19.6 h−1) than other reported non-noble catalysts under the same condition. Comparatively, the as-obtained nanosized or homogenous Co catalysts are inert to this reaction. Co SACs also exhibit high selectivity (97%) and stability (unchanged after five runs) in this reaction. DFT calculations reveal that Co SACs show a low energy barrier in the first elementary step and a high resistance to water, which result in the robust catalytic performance for this reaction.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
A Novel Immobilised Cobalt(Iii) Oxidation Catalyst

BK Das,JH Clark

DOI: https://doi.org/10.1039/b000535p

IF: 4.9

2000-01-01

Chemical Communications

Abstract:A complex form of cobalt(III) has been successfully immobilised on a chemically modified silica and proven to be an active catalyst for the selective oxidation of alkylaromatics using air as the source of oxygen and in the absence of solvent.
Environmentally Friendly Liquid Phase Oxidation: Enhanced Selectivity in the Aerial Oxidation of Alkyl Aromatics, Epoxidations and the Baeyer-Villiger Oxidation Using Novel Silica Supported Transition Metal Ions

IC Chisem,J Chisem,JS Rafelt,DJ Macquarrie,JH Clark,KA Utting

DOI: https://doi.org/10.1002/(sici)1097-4660(199910)74:10<923::aid-jctb124>3.0.co;2-8

1999-01-01

Abstract:Active transition metal species (Co, Cu, Cr, Ni or Mn) supported on a chemically modified silica gel are used as heterogeneous catalysts in a range of Liquid phase oxidation reactions: alkyl aromatic side chain oxidations, epoxidations of alkenes and Baeyer-Villiger oxidations of linear ketones to esters and cyclic ketones to lactones. The catalyst employs metal centres bound to the silica surface via a hydrophobic spacer chain and is thus chemically robust and has a relatively high loading for a supported reagent (c 0.4mmolg(-1)). The Cr version of the catalyst promotes the oxidation of ethylbenzene to acetophenone in a solvent-free system at a rate of 5.5% h(-1) (>370 turnover h(-1)). It is also active for the oxidation of p-chlorotoluene and p-xylene to p-chlorobenzoic acid and p-toluic acid respectively. Cyclohexene is converted to its oxide at room temperature at a rate of c 28% h(-1) (c 12 turnover h(-1)) using either the Ni or Cu versions of the catalyst. The room temperature Baeyer-Villiger oxidation of cyclohexanone is achieved at a rate of 44% h(-1) (49 turnover h(-1)) using the Ni-containing catalyst. The same material also promotes the Baeyer-Villiger oxidation of linear aliphatic ketones and aromatic side chains. All the above systems use either air or molecular oxygen as the oxidant rather than peroxides or peracids. (C) 1999 Society of Chemical Industry.
Highly efficient Co single-atom catalyst for epoxidation of plant oils

Haifeng Qi,Leilei Zhang,Jingyi Yang,Yang Su,Guang Zeng,Aiqin Wang,Tao Zhang

DOI: https://doi.org/10.1063/5.0046166

IF: 4.304

2021-04-07

The Journal of Chemical Physics

Abstract:Epoxidation of bio-derived plant oils is a sustainable route to manufacturing plasticizers, additives in lubricants, and other chemicals. The traditional synthetic approaches suffer from the employment of corrosive mineral acid or expensive peroxides (e.g., H2O2). In this work, we report the epoxidation of plant oils using O2 as the terminal oxidant catalyzed by Co-N-C/SiO2 single-atom catalyst. The single-atom dispersion of cobalt is confirmed by high-angle annular dark field-STEM and x-ray absorption fine structure techniques. In the epoxidation of methyl oleate under mild reaction conditions (35 °C, 0.1 MPa O2), 99% selectivity to the desired product is achieved at full conversion. Even for crude oils, Co-N-C/SiO2 is also effective and good yields of the corresponding epoxides are obtained. In addition, the catalyst is easily recovered and can be reused five times without obvious decay in catalytic activity/selectivity. A superoxide radical involved reaction mechanism is proposed on the basis of kinetic study and EPR experiment.

chemistry, physical,physics, atomic, molecular & chemical
In Situ Formed Co Clusters in Selective Oxidation of Α-C H Bond: Stabilizing Effect from Reactants

Zhijie Wang,Anxiang Guan,Mayfair C. Kung,Anyang Peng,Harold H. Kung,Ximeng Lv,Gengfeng Zheng,Linping Qian

DOI: https://doi.org/10.1016/j.mcat.2019.03.016

IF: 4.6

2019-01-01

Molecular Catalysis

Abstract:Aerobic oxidation of alpha-C-H bond of organic compounds to valuable chemicals is widely investigated in both fundamental research and industry. Due to the good stability of molecular oxygen, severe reaction conditions are generally required. Herein, by in situ synthesis we used molecular oxygen to induce cobalt nanoclusters with the sensitive catalysis in mild selective oxidation. The cobalt containing clusters with an average diameter around 0.9 nm are in situ prepared in the presence of cis-cyclooctene epoxidation and cyclooctene dimer oxide is formed at the interface to stabilize Co clusters with electron donation as an oil-soluble surfactant. The soluble clusters exhibit high activity in selective oxidation of alpha-C-H bond of ethylbenzene into acetophenone and turnover number (TON) reaches about 7 x 10(4) during 50 h' reaction at 373 K, which is around 960 times more active than the one using CoCl2 salt as the catalyst, resulting from efficient mass transportation, It bond interaction and oxygen gas activation. Extended work based on this understanding demonstrates that cobalt nanoclusters also effectively catalyze aerobic oxidation of cyclohexene.
Intercalated cobalt porphyrin between layered double hydroxide nanosheets as an efficient and recyclable catalyst for aerobic epoxidation of alkenes

Chen Shen,Juanjuan Ma,Tianlin Zhang,Shusu Zhang,Chenghao Zhang,Han Cheng,Yuting Ge,Lin Liu,Zhiwei Tong,Bin Zhang

DOI: https://doi.org/10.1016/j.clay.2020.105478

IF: 5.907

2020-01-01

Applied Clay Science

Abstract:Anionic cobalt tetrasulfonatophenyl porphyrin (CoTPPS) intercalated NiAl LDH has been prepared through the exfoliation/restacking route. The obtained hybrids were characterized by XRD, SEM, TEM, IR, UV–Vis and TG-DSC. The volume ratio between the metalloporphyrin solution and LDH nanosheets suspension on the structure of restacking products was investigated and CoTPPS/Ni-Al LDH3.0 was found to exhibit the highest crystallinity. The interlayer spacing determined by XRD shows that CoTPPS was intercalated into the hyroxylated layers of LDH by a perpendicular orientation. The catalytic performance of the obtained hybrid material was investigated in the green epoxidation of various alkenes with oxygen as oxidant and isobutyaldehyde as co-reagent. The immobilized Co porphyrin demonstrated great application potential in oxidative catalysis, exhibiting exceptional stability and catalytic activity in oxidation of various alkenes.
Oxidation of ethylbenzene using some recyclable cobalt nanocatalysts: The role of linker and electrochemical study

M. Arshadi,M. Ghiaci,A.A. Ensafi,H. Karimi-Maleh,Steven L. Suib

DOI: https://doi.org/10.1016/j.molcata.2011.01.027

2011-01-01

Abstract:In this paper some Co(II)–Schiff base complexes were immobilized on SiO2–Al2O3 mixed-oxide using two linkers with different flexibilities (3-aminopropyl and 2-aminoethyl-3-aminopropyl). The synthesized materials were characterized by FT-IR spectroscopy, UV–Vis, CHN elemental analysis, ICP-MS, EPR, SEM, TEM, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The catalytic activity of the heterogenized Co(II)–Schiff base complexes in the oxidation of ethylbenzene was studied without the need of any solvent, at 353K, using tert-butyl hydroperoxide as oxygen source. The best catalyst has a higher catalytic activity (86%) and selectivity to acetophenone (99%) at TBHP/ethylbenzene molar ratio (1:1), and could be reused at least 4 times without significant loss in acetophenone yield, suggesting that no complex leaching took place under the reaction conditions. The electrochemical data about oxidation of the immobilized Co(II)–Schiff base complexes at the surface of multi-walled carbon nanotubes was also studied. The results indicate that the Co-complexes anchored on the modified SiO2–Al2O3 mixed-oxide have an easily oxidizable environment, which led to higher catalytic activity and selectivity.
Green and efficient catalytic oxidation of ethylbenzene to acetophenone over cobalt oxide supported on sugar as a carbon source

Jinhong Li,Zhimei Song,Kaikai Cui,Haonan Li,Mei Han,Jinge Wang,Lidong Chen

DOI: https://doi.org/10.1039/d4cp02803a

IF: 3.3

2024-09-21

Physical Chemistry Chemical Physics

Abstract:The use of biomass as a carbon source to support metal oxides has significant advantages in reducing the cost of catalyst production and environmental protection. The key technology lies in the development of highly active and recyclable catalysts. In this paper, sugar was used as a carbon source, and cobalt oxide was loaded by the in-situ method and impregnation method to prepare the catalyst. The catalysts were characterized by scanning electron Microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), y, X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Raman, In situ electron paramagnetic resonance (in-situ EPR) and nitrogen adsorption and desorption. The characterization results show that, the macroporous carbon-supported cobalt oxide catalyst prepared by the in-situ method has nanoparticles on the solid support, and the dispersion of cobalt oxide on the support is more uniform, compared with the catalyst prepared by the impregnation method. The reaction performance of the prepared catalyst was evaluated by the green oxidation of ethylbenzene (EB) to acetophenone (AP) as a probe reaction. Under the optimized reaction conditions, temperature (T) = 80 °C, m(catalyst): m(EB) = 0.15, n(H2O2): n(EB) = 14.4:1, t = 8 h, V(EB): V(CH3COOH) = 1:10, n(EB): n(KBr) = 10:1, the conversion of EB and the selectivity of AP were 84.1% and 81.3%, respectively. In the common reaction pathway of free radical and acid catalysis, Co/SC-10-in situ improved the reactivity of EB oxidation with the promotion of cobalt ions supported on the carbon support. The cobalt oxide catalyst supported by biomass carbon has ideal recycling and regeneration performance, which provides a new idea for the application of biomass

chemistry, physical,physics, atomic, molecular & chemical
Stereoselective Synthesis of Trisubstituted Epoxides Via Cobalt Catalysis

Honghao Bao,Yixiang Shi,Junliang Zhang,Junfeng Yang,Junliang Wu

DOI: https://doi.org/10.1039/d2qo00815g

IF: 5.456

2022-01-01

Organic Chemistry Frontiers

Abstract:Catalytic epoxide synthesis by transition-metal catalysis offers an atom- and step-economical route from readily available aldehydes and diazocarbonyl compounds.

Enhanced Selectivity in Green Catalytic Epoxidation Using A Supported Cobalt Complex

Role of the Co-Catalyst in the Asymmetric Coupling of Racemic Epoxides with CO2 Using Multichiral Co(iii) Complexes: Product Selectivity and Enantioselectivity

Polyoxometalate-nano Gold Hybrid Mesostructured Catalyst for Green Cyclohexene Epoxidation

Bioinspired Manganese Complexes and Graphene Oxide Synergistically Catalyzed Asymmetric Epoxidation of Olefins with Aqueous Hydrogen Peroxide

Environmentally Friendly Catalysis Using Supported Reagents: Catalytic Epoxidation Using a Chemically Modified Silica Gel

Cobalt Single Atoms on Tetrapyridomacrocyclic Support for Efficient Peroxymonosulfate Activation.

A new and efficient methodology for olefin epoxidation catalyzed by supported cobalt nanoparticles

A Silica Supported Cobalt (II) Salen Complex As Efficient and Reusable Catalyst for the Selective Aerobic Oxidation of Ethyl Benzene Derivatives

Enhanced Interfacial Interaction of Mesoporous N, S Co-Doped Carbon Supported WO3-WS2 for Green and Selective Oxidation of Alcohols

Β-Selective Epoxidation of Δ5-steroids by O2 Using Surface Functionalised Silica Supported Cobalt Catalysts

Hydrophobic Modification of Microenvironment of Highly Dispersed Co3O4 Nanoparticles for the Catalytic Selective Oxidation of Ethylbenzene

A recyclable cobalt( iii )–ammonia complex catalyst for catalytic epoxidation of olefins with air as the oxidant

Cobalt single atom site catalysts with ultrahigh metal loading for enhanced aerobic oxidation of ethylbenzene

A Novel Immobilised Cobalt(Iii) Oxidation Catalyst

Environmentally Friendly Liquid Phase Oxidation: Enhanced Selectivity in the Aerial Oxidation of Alkyl Aromatics, Epoxidations and the Baeyer-Villiger Oxidation Using Novel Silica Supported Transition Metal Ions

Highly efficient Co single-atom catalyst for epoxidation of plant oils

In Situ Formed Co Clusters in Selective Oxidation of Α-C H Bond: Stabilizing Effect from Reactants

Intercalated cobalt porphyrin between layered double hydroxide nanosheets as an efficient and recyclable catalyst for aerobic epoxidation of alkenes

Oxidation of ethylbenzene using some recyclable cobalt nanocatalysts: The role of linker and electrochemical study

Green and efficient catalytic oxidation of ethylbenzene to acetophenone over cobalt oxide supported on sugar as a carbon source

Stereoselective Synthesis of Trisubstituted Epoxides Via Cobalt Catalysis