Abstract:In this study, in an attempt to get an excellent flame retardant, herein, a new nanofiller (@TEOS) with polyethyleneimine (PEI) as a crosslinker, Zr-based metal-organic framework (UiO-66) and tetraethoxysilane (TEOS) modified graphitic carbon nitride (CN) was synthesized. Different characterization tests confirmed the successful preparation of @TEOS. Then, @TEOS was doped into intumescent fire retardant (IFR) coating by solution blending method and the coating (@TEOS/EP) was gained after curing. As expected, the @TEOS significantly improved the fire performance of the IFR coating. The coating (@TEOS/EP) with the addition of 2 wt% @TEOS reduced the backside temperature by 102.9 °C over that of pure EP, proving enhanced flame retardancy. Meanwhile, @TEOS/EP achieved the highest expansion height (21.5 mm) in the furnace experiment, contributing to a lower heat transfer ratio. In addition, the thermogravimetric analysis revealed an increase in residual char content to 31.84 wt%, which helped to resist external heat penetration. Cone calorimeter testing (CCT) showed that the peak heat release rate (PHRR), total heat release rate (THR), peak smoke production rate (PSPR), total smoke production (TSP), peak CO production rate (PCOPR), and peak CO 2 production rate (PCO 2 PR) of @TEOS/EP were reduced by 29 %, 19 %, 35 %, 37 %, 36 %, and 19 %, respectively, compared to pure EP, demonstrating the improved flame retardancy and smoke suppression properties. The results indicated that CN formed a thermal barrier at a high temperature and UiO-66 generated zirconium oxide (ZrO 2 ) to catalyze the formation of residual char, thus producing a barrier effect. The TEOS on the UiO-66 surface further decomposed to form a silicon network to enhance the char layer strength of the composite. The synergistic outcome of CN, UiO-66, and TEOS offers potential avenues for the development of efficient IFR coating.

A New Type of BTP/Zeolites Nanocomposites As Mixed-phase Fire Suppressant: Preparation, Characterization, and Extinguishing Mechanism Discussion

Enhanced suppression of metal combustion processes using a compound expansible graphite extinguishing agent: Experimental study and mechanistic insights

Synergistic effect of zinc borate and microencapsulated black phosphorus nanosheets for improved flame retardancy and smoke-suppression performance of epoxy resin

Nanoclay, intumescent flame retardants, and their combination with chemical modification for the improvement of the flame retardant properties of polymer nanocomposites

Nanohybrid of Co3O4 Nanoparticles and Polyphosphazene-Decorated Ultra-Thin Boron Nitride Nanosheets for Simultaneous Enhancement in Fire Safety and Smoke Suppression of Thermoplastic Polyurethane

Boron/Difluoroamino (B/NF2) Composites Prepared Through an Energetic Fluorinated-Centerd Surface Modification Strategy to Enhance Their Ignition and Combustion Characteristics

Covalent grafting diazotized black phosphorus with ferrocene oligomer towards smoke suppression and toxicity reduction

Integrated effect of NH2-functionalized/triazine based covalent organic framework black phosphorus on reducing fire hazards of epoxy nanocomposites

Revealing and modeling of fire products in gas-phase for epoxy/black phosphorus-based nanocomposites

Experimental investigation of the performance of modified expanded graphite powder doped with zinc borate in extinguishing sodium fires

Melamine Tannin Nanosheet Loading on Black Phosphorus Towards Enhancing Its Thermal Safety, Catalytic Smoke and Toxicity Suppression Performances

A Facile Strategy to Simultaneously Exfoliate and Functionalize Boron Nitride Nanosheets Via Lewis Acid-Base Interaction

Conceptually Novel Few-Layer Black Phosphorus/Supramolecular Coalition: Noncovalent Functionalization Toward Fire Safety Enhancement

Investigating the efficacy of expanded graphite/NaCl composite powder as an extinguishing agent for metal combustion suppression

Preparation of Soybean Root-Like CNTs/bimetallic Oxides Hybrid to Enhance Fire Safety and Mechanical Performance of Thermoplastic Polyurethane

Combination of Black Phosphorus Nanosheets and MCNTs Via Phosphoruscarbon Bonds for Reducing the Flammability of Air Stable Epoxy Resin Nanocomposites.

Synergetic modification of graphitic carbon nitride by Zr-based metal-organic framework and tetraethoxysilane for improving fire performance in composite coatings

An Operable Platform Towards Functionalization of Chemically Inert Boron Nitride Nanosheets for Flame Retardancy and Toxic Gas Suppression of Thermoplastic Polyurethane

Co-Effect Flame Retardation of Co 3 O 4 -Loaded Titania Nanotubes and α-Zirconium Phosphate in the Epoxy Matrix

Tuning stability, rheology, and fire-extinguishing performance of advanced firefighting foam material by inorganic nanoparticle flame retardants

MXene based core-shell flame retardant towards reducing fire hazards of thermoplastic polyurethane