Abstract:Poly (lactic acid) (PLA), as a biodegradable and biocompatible polymer, has attracted extensive attention and investigation in recent years. However, the inherent brittleness of PLA greatly limits its application. In this work, super toughed PLA-based blends were prepared by facile melt blending of PLA with poly (ethylene vinyl acetate) (EVA) and compatibilized by ethylene-methyl acylate-glycidyl methacrylate (E-MA-GMA), owing to the partial miscibility with EVA domains and the chemical reactions with PLA matrix of E-MA-GMA. Micromorphology reveals that E-MA-GMA effectively tunes the interface interactions and phase morphology of the incompatible PLA and EVA. Increasing the E-MA-GMA content promotes the phase adhesion and increases the interface thickness, thus producing a super-toughened blend behaving an incomplete fracture during impact tests. The maximum impact strength (about 77.6 kJ/m2) was obtained for the ternary blend with 12 wt% E-MA-GMA, which is 27.7 times higher than that of neat PLA. Rheological studies showed that the viscosity was enhanced for the ternary blends with large amounts of E-MA-GMA at low frequency. The PLA crystallinity was suppressed and the thermal stability was improved in the ternary blends. Micromechanical deformations and toughening mechanisms were studied, indicating that the matrix shear yielding, induced by the improved interface adhesion and the formed semi-continuous microstructure, was the main source for impact energy dissipation.

Study on the Properties of Poly(lactic acid)/Ethylene Vinyl Acetate/Calcium Carbonate Composites

Toughening and Crystallization Behavior of Poly(Lactic Acid)/Wood Flour Composite

Preparation and Performance of Poly(lactic Acid)-Wood Flour-Glycidyl Methacrylate-g-Ethylene-Octene Copolymer Composites

Study on Preparation and Properties of Glass Fiber Reinforced Polylactide

Effect of Compatibilizer and Nucleation Agent on the Properties of Poly(lacticacid)/Polycarbonate (PLA/PC) Blends

Study on tensile properties,microstructure and crystallization behavior of polylactide blends

Toughening of Poly(Lactic Acid) by Ethylene-Co-Vinyl Acetate Copolymer with Different Vinyl Acetate Contents

Study on the Preparation and Properties of Caco3/Polypropylene Composite Materials

Facile method to improve toughness and biodegradability of polylactide by modified CaCO3

Preparation and Characterization of PLA /EMAG Blends

Super toughed poly (lactic acid)/poly (ethylene vinyl acetate) blends compatibilized by ethylene-methyl acrylate-glycidyl methacrylate copolymer

Study on preparation and properties of short carbon fiber reinforced polylactide

The application of the synergistic effect between the crystal structure of poly(lactic acid) (PLA) and the presence of ethylene vinyl acetate copolymer (EVA) to produce highly ductile PLA/EVA blends

Crystallisation, Mechanical Properties and Rheological Behaviour of PLA Composites Reinforced by Surface Modified Microcrystalline Cellulose

The Thermal and Crystallization Studies of Luffa Fiber Reinforced Poly Lactic Acid Composites

Preparation, Mechanical and Thermal Properties of PLA/PBAT/EGMA Blends

Properties of Poly(Lactic Acid)/Poly(Butylene Adipate-Co-Terephthalate)/Nanoparticle Ternary Composites

Effects of Inorganic Fillers on the Thermal and Mechanical Properties of Poly(lactic acid).

PP/elastomer/calcium carbonate composites: effect of elastomer and calcium carbonate contents on the deformation and impact behavior

Structural characterization and related properties of EVA/ZnAl-LDH nanocomposites prepared by melt and solution intercalation

Study on the Morphology, Mechanical, Thermal Stability Properties of Poly(Lactic-Acid)/Poly(Ether-Block-Amide) Blends Prepared by Triple-Single Screw Extruder