Abstract:A high soluble and stable epsilon-Zn(OH)(2) precursor is synthesized at below room temperature to efficiently prepare ZnO whiskers. The experimental results indicate that the formation of ZnO whiskers is carried out mainly via two steps: the formation of ZnO seeds from epsilon-Zn(OH)(2) via the in situ solid conversion, and the following growth of whiskers via dissolution-precipitation route. The decrease of temperature from 25 to 5 degree celsius promotes the formation of epsilon-Zn(OH)(2) with higher solubility and stability, which balances the conversion and dissolution rates of precursor. The Rietveld refinement, DFT calculations and MD simulations reveal that the primary reason for these characteristics is the expansion of e-Zn(OH)(2) lattice due to temperature, causing difficulties in the dehydration of adjacent OH. Simultaneously, the larger specific surface area favors the dissolution of epsilon-Zn(OH)(2). Based on this precursor, well-dispersed ZnO whiskers with 9.82 mu m in length, 242.38 nm in diameter, and an average aspect ratio of 41 are successfully synthesized through a SDSN-assisted hydrothermal process at 80 degree celsius. The process has an extremely high solid content of 2.5% (mass ratio of ZnO to solution) and an overall yield of 92%, which offers a new approach for the scaled synthesis of high aspect ratio ZnO whiskers by liquid-phase method.

Supersaturation-controlled synthesis of two types of single-sided ZnO comb-like nanostructures by thermal evaporation at low temperature

LOW-TEMPERATURE SYNTHESIS OF NOVEL ZINC OXIDE SINGLE-SIDED COMB-LIKE STRUCTURE

Self-Organized Zno Microcombs With Cuboid Nanobranches By Simple Thermal Evaporation

Controlled synthesis of ZnS nanocombs by self-evaporation using ZnS nanobelts as source and substrates

Hydrothermal synthesis of a 3D double-sided comb-like ZnO nanostructure and its growth mechanism analysis.

Synthesis and characterization of ZnO nanostructures prepared by a thermal evaporation process

Controllable Morphology of ZnO Nanostructures Via a Solvothermal Route

Sequential Occurrence of ZnO Nanopaticles, Nanorods, and Nanotips During Hydrothermal Process in a Dilute Aqueous Solution

Disc-Capped ZnO Nanocombs

Controllable Synthesis and Optical Properties of Novel ZnO Cone Arrays Via Vapor Transport at Low Temperature

Low-temperature growth of uniform ZnO particles with controllable ellipsoidal morphologies and characteristic luminescence patterns.

Controllable Synthesis and Characterization of Tube Brush-Like ZnO Nanowires Produced Via a Simple Chemical Vapor Deposition Method

One-Step Hydrothermal Synthesis of Comb-Like Zno Nanostructures

TEM investigations on ZnO nanobelts synthesized via a vapor phase growth

Bulk-Quantity Synthesis and Conductive Properties of Comb-Like Dendritic ZnO Nanostructures

Growth and Characterization of Ultra-Long ZnO Nanocombs

Tempererature-Controlled Growth Of Zno Nanostructures: Branched Nanobelts And Wide Nanosheets

Fabrication of ZnO ring-like nanostructures at a moderate temperature via a thermal evaporation process

Synthesis and Mechanism of 1D ZnO Based on Alkaline Dissolution‐Conversion Strategy of High Stable and Soluble Ɛ‐zn(oh)2

Zinc Oxide Nanostructures: Morphology Derivation and Evolution

Controlled Synthesis of 1D ZnO Nanostructures Via Hydrothermal Process