Optimization of coagulation removal of fluoride ions from mine wastewater by polyaluminum chloride based on response surface methodology
LI Shaoqiu,CHEN Wei,ZHANG Yunying,LI Ding,DUAN Shule,CHENG Xiaoyu,JIANG Caifang,XU Qian,DONG Huiyu,XU Dongyao,QIANG Zhimin
DOI: https://doi.org/10.12030/j.cjee.202301077
2023-01-01
Abstract:In order to effectively remove fluoride ions from mine wastewater, the coagulation effect of polymerized aluminum chloride（PAC） on a mine fluoride wastewater was studied, a single-factor experiment was designed to investigate the effects of aluminum-fluoride molar ratio（r）, pH and coagulation time on the removal of fluoride ions by PAC coagulation. Based on the Box-Behnken Design（BBD） experimental design principle of response surface method, the effects of r, pH and coagulation time on the coagulation effect were investigated, and the process parameters were optimized. The results showed that the coagulation effect was orderly influenced by r＞pH＞coagulation time. Under the optimal conditions of r=19.04, pH=6.5 and coagulation time of 2.9 min, the removal rate of fluoride ions was 56.4%, which was consistent with the predicted value（56.46%）. The mechanism of fluoride ions removal included flocculation and precipitation of fluoride ions by PAC, ion exchange and complexation precipitation, etc.. pH affected the speciation of PAC in the solution, and the coagulation time affected the formation rate and compactness of alum flocs in the solution, which further affected the coagulation and precipitation effect. It can be seen that the prediction of BBD optimization model was basically consistent with the actual treatment effect, and the molar ratio of aluminum to fluorine and pH were the main controlling factors for fluoride ions removal. The experimental method used in this study has the advantages of simple treatment process, stable effect and low cost, which can provide a reference for the removal of fluoride ions in actual mine wastewater.