Abstract:Fiber-reinforced polymer (FRP) composites modified with ceramic fillers have excellent thermal stability at high temperatures and are applied in aeronautical and aerospace fields. The effect of strain rate on their mechanical behavior at different temperatures (corresponding to different states of FRP composites) is of interest. In this study, dynamic and quasi-static compressive tests of a kind of ceramifiable polymer composites, B 4 C-talc modified high-silica/boron-phenolic (B 4 C-talc_HS/BPh) composites, were examined at 25–1000 °C. A high-temperature split Hopkinson pressure bar with a double-synchronous assembled system was employed to carry out dynamic tests. During the tests, high-speed camera was employed to monitor the progressive failure process, and the failure morphology was examined using an optical microscope. The tests show that the compressive strength decreases with increasing temperature to 600 °C at both low and high strain rates. However, it is found for the first time that the compressive strength increases obviously at 800–1000 °C due to the ceramifiable transition at a high strain rate. Moreover, the influence of temperature and loading rate on the compressive failure behavior of B 4 C-talc_HS/BPh composites was systematically investigated. Shear force dominated the failure under dynamic load at 25–1000 °C, while it was 25–450 °C under quasi-static load. Piece-wise models are developed to describe the temperature and strain-rate dependent evolution behavior of the compressive strength. This research provides basic experimental data on the mechanical properties of B 4 C-talc_HS/BPh composites, which can inform the design, evaluation of integrity, and reliability of thermal protection structures.

High Temperature Fracture Behavior of Tungsten Fiber Reinforced Copper Matrix Composites under Dynamic Compression

Dynamic Mechanical Properties and Fracture Characteristics of Tungsten Fiber Reinforced Cu-Based Composites

Effect of Heating Process on Fracture Behaviors of Wf/Cu82Al10Fe4Ni4 Composites

The effect of interface modification on fracture behavior of tungsten fiber reinforced copper matrix composites

Preparation and mechanical property of W f/Cu alloy matrix composites

Micro-Mechanical Fracture Investigations on Grain Size Tailored Tungsten-Copper Nanocomposites

In-Situ Study of High Temperature Tensile Fracture Mechanism of Mar-M247 Alloy

Microstructure Characterization of Al Matrix Composite Reinforced with Ti–6Al–4V Meshes after Compression by Scanning Electron Microscope and Transmission Electron Microscope

Mechanical Behavior and Dynamic Failure of High-Strength Ultrafine Grained Tungsten under Uniaxial Compression

Temperature dependence of fracture behavior of in situ synthesized TiC/Ti-alloy matrix composite

Microstructure characterization of Al matrix composite reinforced with Ti-6Al-4V meshes after compression by scanning electron microscope and transmission electron microscope.

Strength properties and fracture behavior of ZrC particle-reinforced tungsten composite

The Ductile-Brittle Transition Behaviors of W/Ta Multilayer Composites

Quantitative Analysis on Microstructure and High Temperature Fracture Mechanism of 2.6vol%tibw/ti6al4v Composites with Equiaxed Microstructure after Heat Treatment

Adiabatic shear failure of high reinforcement content aluminum matrix composites

Temperature Effect on Dynamic Compression Performance of Random Fibrous Composites in the TTT and IP Directions

Hot Deformation Behavior and Microstructure Evolution of Flaky Ti3AlC2 Particles Reinforced Pure Al Composite

The microstructure and elevated temperature strength of tungsten-titanium carbide composite

Coupled Effects of High Temperature and Strain Rate on Compressive Properties of Hybrid Fiber UHTCC

Evolution of strain-rate dependent compressive failure behavior of ceramifiable FRP composites at high temperature conditions

Deformation Behavior and Microstructure Evolution Mechanism of 5vol.% (tibw + TiCp)/Ti Composites During Isothermal Compression