Abstract:Noble-metal-coated carbon-based nanoparticles, when used as electrically conductive fillers, have the potential to provide excellent conductivity without the high weight and cost normally associated with metals such as silver and gold. To this effect, many attempts were made to deposit uniform metallic layers on core nanoparticles with an emphasis on silver for its high conductivity. The results so far were disheartening with the metal morphology being better described as a decoration than a coating with small effects on the electrical conductivity of the bulk particles. We tackled in this work the specific problem of electroless deposition of silver on carbon nanofibers (CNFs) with the investigation of every step of the process. We performed X-ray photoelectron spectroscopy (XPS), transmission and scanning electron microscopy (TEM, SEM), zeta potential, and electrical conductivity measurements to identify a repeatable, reliable set of parameters allowing for a uniform and fully connected silver deposition on the surface of the CNFs. The bulk particles' specific electrical conductivity (conductivity per unit mass) undergoes a more than 10-fold increase during the deposition, reaching 2500 S·cm<sup>2</sup>/g, which indicates that the added metal mass participates efficiently to the conduction network. The particles keep their high aspect ratio through the process, which enables a percolated conduction network at very low volume loadings in a composite. No byproducts are produced during the reaction so the particles do not have to be sorted or purified and can be used as produced after the short ∼15 min reaction time. The particles might be an interesting replacement to conventional fillers in isotropic conductive adhesives, as a conductive network is obtained at a much lower loading. They might also serve as electrically conductive fillers in composites where a high conductivity is needed, such as lightning strike protection systems, or as high surface area silver electrodes.

Effect of silver nanowires on electrical conductance of system composed of silver particles

Low Electrical Percolation Threshold of Silver and Copper Nanowires in Polystyrene Composites

In situ electrical measurements of polytypic silver nanowires.

Effects of Inclusion Size on Thermal Conductivity and Rheological Behavior of Ethylene Glycol-Based Suspensions Containing Silver Nanowires with Various Specific Surface Areas

Silver Nanowires Eelectrodeposited from Reverse Hexagonal Liquid Crystals

Electrically conductive adhesives with sintered silver nanowires

Electrical and Thermal Transport through Silver Nanowires and Their Contacts: Effects of Elastic Stiffening

Preparation of silver nanowires and their application in conducting polymer nanocomposites

Enhancing Conductivity of Silver Nanowire Networks through Surface Engineering Using Bidentate Rigid Ligands

Fabrication of silver/silver-tetracyanoquinodimethane heterogeneous nanowires using nanoskiving method

The effect of nanowire length and diameter on the properties of transparent, conducting nanowire films

Synthesis, characterization and self-assembly of silver nanowires

Synthesis of silver nanowires with controlled diameter and their conductive thin films

Self-Assembly Synthesis of Silver Nanowires/Graphene Nanocomposite and Its Effects on the Performance of Electrically Conductive Adhesive.

The Sintering Behavior of Electrically Conductive Adhesives Filled with Surface Modified Silver Nanowires

Isotropical Conductive Adhesives Filled with Silver Nanowires

Synthesis of Highly Conductive, Uniformly Silver-Coated Carbon Nanofibers by Electroless Deposition

Synthesis and Characterizing of High Aspect Ratio Silver Nanowires by Polyol Process

High conductivity of isotropic conductive adhesives filled with silver nanowires

Effect of A Magnetic Field on the Preparation of Silver Nanowires Using Solid Electrolyte Thin Films

Regulation of Multidimensional Silver Nanostructures for High-Performance Composite Conductive Adhesives